Yukon Metals Identifies High-Priority Drill Targets at Birch
Yukon Metals Corp (YMMCF) has announced results from geophysical surveys at its Birch Property in Yukon. The company completed eight Electrical Resistivity Tomography (ERT) and Induced Polarization (IP) surveys over the eastern portion of a copper and gold anomaly.
The surveys identified several high-priority drill targets and aligned with previously identified soil anomalies of up to 0.24% Cu and 0.99 g/t Au spanning 1400 meters, as well as rock chip sampling showing values up to 2.42% Cu and 14.1 g/t Au. The geophysical data revealed anomalies below surface, interpreted as changes in rock type and sulphide mineralization in skarn horizons.
The Birch Property, spanning 7,000 hectares and located 65 km northeast of Burwash Landing, is one of seventeen properties held by Yukon Metals across 42,500 hectares in the Yukon. The company plans to proceed with drilling, targeting mineralized skarn horizons.
Yukon Metals Corp (YMMCF) ha annunciato i risultati delle indagini geofisiche presso il suo Birch Property nello Yukon. L'azienda ha completato otto sondaggi di Tomografia Elettrica di Resistività (ERT) e Polarizzazione Indotta (IP) nella parte orientale di un'anomalia di rame e oro.
Le indagini hanno identificato diversi obiettivi di perforazione ad alta priorità e sono risultate in linea con le anomalie del suolo precedentemente identificate, fino a 0,24% di Cu e 0,99 g/t di Au, per una lunghezza di 1400 metri, così come campionamenti di rocce che mostrano valori fino a 2,42% di Cu e 14,1 g/t di Au. I dati geofisici hanno rivelato anomalie sotto la superficie, interpretate come cambiamenti nel tipo di roccia e mineralizzazione solfurea negli orizzonti di skarn.
Il Birch Property, esteso su 7.000 ettari e situato a 65 km a nord-est di Burwash Landing, è una delle diciassette proprietà detenute da Yukon Metals su un totale di 42.500 ettari nello Yukon. L'azienda prevede di procedere con le perforazioni, mirate agli orizzonti di skarn mineralizzati.
Yukon Metals Corp (YMMCF) ha anunciado los resultados de las encuestas geofísicas en su Birch Property en Yukon. La empresa completó ocho encuestas de Tomografía de Resistividad Eléctrica (ERT) y Polarización Inducida (IP) en la porción oriental de una anomalía de cobre y oro.
Las encuestas identificaron varios objetivos de perforación de alta prioridad y se alinearon con anomalías de suelo previamente identificadas de hasta 0.24% de Cu y 0.99 g/t de Au que abarcan 1400 metros, así como muestreos de roca que mostraron valores de hasta 2.42% de Cu y 14.1 g/t de Au. Los datos geofísicos revelaron anomalías por debajo de la superficie, interpretadas como cambios en el tipo de roca y mineralización de sulfuros en horizontes de skarn.
El Birch Property, que abarca 7,000 hectáreas y se encuentra a 65 km al noreste de Burwash Landing, es una de las diecisiete propiedades que posee Yukon Metals en un total de 42,500 hectáreas en Yukon. La empresa planea continuar con la perforación, con el objetivo de los horizontes de skarn mineralizados.
유콘 메탈스 Corp (YMMCF)는 유콘의 버치 자산에서 지구물리학 조사 결과를 발표했습니다. 회사는 구리와 금의 이상 지역 동부에 대해 전기 저항 톰그래피(ERT)와 유도 극성화(IP) 조사를 완료했습니다.
조사는 여러 우선적 시추 목표를 식별했으며, 0.24% Cu 및 0.99 g/t Au까지의 이전에 확인된 토양 이상과 일치하며, 1400미터에 걸쳐 있습니다. 또한 2.42% Cu 및 14.1 g/t Au에 이르는 암석 샘플링 값이 나타났습니다. 지구물리학 데이터는 암석 유형 변화와 스카른 지대에서의 황화물 광물화를 나타내는, 표면 아래의 이상을 밝혀냈습니다.
버치 자산은 7,000 헥타르에 걸쳐 있으며, 버우시 랜딩에서 북동쪽으로 65km 떨어져 위치해 있습니다. 이는 유콘 메탈스가 유콘 전역의 42,500헥타르에 걸쳐 보유한 17개의 자산 중 하나입니다. 회사는 광물이 있는 스카른 지대를 목표로 하여 시추를 진행할 계획입니다.
Yukon Metals Corp (YMMCF) a annoncé les résultats des études géophysiques sur sa Birch Property au Yukon. L'entreprise a réalisé huit enquêtes de Tomographie de Résistivité Électrique (ERT) et de Polarisation Induite (IP) dans la partie orientale d'une anomalie de cuivre et d'or.
Les enquêtes ont identifié plusieurs cibles de forage de haute priorité et ont été en accord avec des anomalies de sol précédemment identifiées allant jusqu'à 0,24% de Cu et 0,99 g/t d'Au, s'étendant sur 1400 mètres, ainsi que des échantillons de roche montrant des valeurs allant jusqu'à 2,42% de Cu et 14,1 g/t d'Au. Les données géophysiques ont révélé des anomalies sous la surface, interprétées comme des changements de type de roche et d'une minéralisation de sulfure dans les horizons de skarn.
La Birch Property, qui s'étend sur 7 000 hectares et se situe à 65 km au nord-est de Burwash Landing, est l'une des dix-sept propriétés détenues par Yukon Metals sur un total de 42 500 hectares dans le Yukon. L'entreprise prévoit de poursuivre les forages, en ciblant les horizons de skarn minéralisés.
Yukon Metals Corp (YMMCF) hat die Ergebnisse von geophysikalischen Untersuchungen auf seinem Birch Property im Yukon bekannt gegeben. Das Unternehmen hat acht elektrische Widerstandstomographie (ERT) und induzierte Polarisation (IP) Umfragen im östlichen Teil einer Kupfer- und Goldanomalie abgeschlossen.
Die Untersuchungen identifizierten mehrere hochpriorisierte Bohrziele und stimmten mit zuvor identifizierten Bodenanomalien von bis zu 0,24% Cu und 0,99 g/t Au über 1400 Meter überein, sowie Gesteinsproben, die Werte von bis zu 2,42% Cu und 14,1 g/t Au zeigen. Die geophysikalischen Daten zeigten Anomalien unterhalb der Oberfläche, die als Veränderungen in der Gesteinsart und Sulfidmineralisierung in Skarnhorizonten interpretiert wurden.
Das Birch Property erstreckt sich über 7.000 Hektar und liegt 65 km nordöstlich von Burwash Landing. Es ist eines von siebzehn Grundstücken, die Yukon Metals auf insgesamt 42.500 Hektar im Yukon besitzt. Das Unternehmen plant, mit der Bohrung fortzufahren und sich auf mineralisierte Skarnhorizonte zu konzentrieren.
- Identification of multiple high-priority drill targets through geophysical surveys
- Strong soil anomalies with values up to 0.24% Cu and 0.99 g/t Au over 1400 meters
- Significant rock chip sampling results showing up to 2.42% Cu and 14.1 g/t Au
- None.
VANCOUVER, British Columbia, Jan. 08, 2025 (GLOBE NEWSWIRE) -- Yukon Metals Corp. (CSE: YMC, FSE: E770, OTCQB: YMMCF) (“Yukon Metals” or the “Company”) is pleased to provide results of an Electrical Resistivity Tomography (ERT) and Induced Polarization (IP) geophysical survey program over its 7,000-hectare Birch Property (“Birch”), located 65 km northeast of Burwash Landing, Yukon. Birch is one of Yukon Metals’ seventeen high-quality properties across 42,500 hectares in the Yukon.
Highlights:
- Yukon Metals geologists completed eight ERT and IP geophysical surveys over the eastern portion of the 2024 soil sampled copper and gold anomaly at Birch. The survey identified several high-priority drill targets.
- Structural geological features can be inferred from the geo-electric signatures of the rock, guiding drill placement.
- The new geophysical data aligns with previously identified soil anomalies of up to
0.24% Cu in soils and up to 0.99 g/t Au spanning 1400 meters, and rock chip sampling with values up to2.42% Cu and 14.1 g/t Au, further emphasizing the project's potential for significant mineralization. - All sections intersecting the soil anomaly zone showed geophysical anomalies below surface that are interpreted to correspond to changes in rock type and sulphide mineralization in skarn horizons over several hundred meters.
Rory Quinn, President & CEO stated, “With this geological survey program, which includes induced polarization, surface mapping, and soil and rock sampling programs, Yukon Metals is closer to uncovering the mineral potential of the highly prospective Birch Property. The next step will be to commence drilling at Birch, targeting mineralized skarn horizons.”
The survey identified several high-priority geophysical anomalies supporting the next phase of exploration. These results mark an important step forward in advancing Birch as a highly prospective property for precious and base metal mineralization. The geophysical data is being integrated with surface geochemical results, geological mapping, and previously collected airborne magnetic survey data, to define both high-priority drill targets, and areas for future exploration.
The ERT and IP surveys were conducted to study the electrical properties of the area's dominant rock formations, including limestone, marble, schist, and granite. Structural geological features and contacts can be inferred from the geo-electric signatures of the rock, guiding drill placement.
These techniques involve sending electrical currents into the ground and measuring how different materials respond, creating detailed subsurface maps that highlight geological layers and structures. Induced polarization measures how certain materials, like metallic minerals, temporarily store and release electrical charge, often indicating the presence of sulfides. Conductivity indicates rock containing electrically conductive minerals such as sulphides and metallic elements. Resistivity is used to guide identification of rock type, delineate rock types, depth of overburden and identify anomalous zones.
Advanced software processed the data to produce high-resolution images, helping identify key geological features such as bedrock layers, mineralized zones, and areas of uncertainty.
Figure 1- 2024 Geophysics Lines with anomalous Copper in Soil and Rock Samples.
Figure 2- Conductivity sections with overlain 2024 copper-in-soil greater than 200 ppm. High conductivity zones (red) show a strong, continuous anomaly across six of the parallel surveys, potentially indicative of mineralized zones
Figure 3- 3d views of Induced Polarization chargeability sections. High chargeability zones (red) potentially indicative of sulphide mineralization and consistent with skarn geophysical signatures are visible in most of the surveys.
Figure 4- 3d views of Resistivity sections. Deep, high resistivity zones (red) are likely schist. Low resistivity zones (blue) are likely marble, intrusive granodiorite or mineralized skarns. The prospective low resistivity zones align with IP chargeability and conductivity highs. Near-surface high resistivity (red) may be permafrost surficial colluvium.
About the Birch Project
Yukon Metals owns
The Yukon-Tanana Terrane structurally overlies the Ruby Range Batholith which is regionally mapped in the northeastern portion of the property occurring as Ruby Range quartz-feldspar porphyry and Rhyolite Creek porphyry and intermediate and felsic volcanic rock (Israel et. Al., 2011). Project-level mapping indicates the geology of the area is comprised of schists and marble units, moderately to strongly oxidised felsic intrusive, and patchy oxidised porphyritic rhyolite dykes.
Copper, zinc and molybdenum mineralization was first identified in the area in the early 1970s as part of a small exploration campaign which uncovered several skarn horizons in the northern project area, as well as molybdenite in quartz veins and stringers in granodiorite float on the southeastern side of the property (MINFILE 115G 077). Gold was not assayed for until interest renewed in the early 2010s with soil and mapping exploration work over the area uncovering several high soil anomalies ranging from 0.02-15g/t Au.
The Birch claims were staked over skarn copper and soil gold anomalies in 2022 by Lapie Mining Inc., and subsequently acquired by Yukon Metals in 2024 as part of the Berdahl land package. Highlights from the 2024 prospecting and geochemical program include soil samples across the northern and central sections of the claim block revealing significant gold, copper, and molybdenum mineralization. A particularly strong copper and gold anomaly has been identified in the northern portion of the block, extending roughly east-west over 1,400 meters, signaling an exciting target for further exploration. Additionally, rock-chip float samples from the eastern segment of this anomaly have shown impressive values.
Methodology
Geophysical Survey
A Lippmann 4-point Resistivity System was used. A 200-300 m cable configuration was selected for high near-surface detail and 50-100 m of depth penetration. Data was collected and inverted using Advance Geophysics Inc. Earth Imager 2D software. Noisy data points and electrodes with poor contact resistance were removed and data was filtered for spikes or depressions in resistivity. The software produced two-dimensional tomograms using a smoothed, least squares damped and robust inversion parameters. Preliminary interpretations were conducted.
The chargeability, conductivity, and resistivity scales shown on the individual survey sections are not standardized across all sections and may vary to effectively highlight local geological features. Variations in scale are used to optimize the visualization of anomalies and do not imply absolute differences in geophysical values between sections. Conductivity ranges from 0.01 to 3.9 ms/M, chargeability from -3 to 45 ms, and resistivities from 200-50,000 Ohm-m.
Rock and Soil Sampling
Rock and soil samples were sent to ALS Minerals for analysis with sample preparation in Whitehorse, Yukon and analysis in North Vancouver, British Columbia.
Rock samples were prepared by crush to 70 % passing 2mm, 250g split pulverised better than
Soil samples were collected with a battery-powered permafrost soil drill recovering high-quality samples below boulders and frozen ground to depths of 1m. This technique was designed specifically for Yukon geochemical exploration to better delineate mineralization along steep, rocky and permanently frozen north-facing slopes unsuitable for traditional soil sampling techniques. Samples were dried and sieved to 180 um (Prep-41A) and analysed for 51 elements by aqua regia digestion and ICP-MS and ICP-AES (AuME-TL44).
Rock samples taken while prospecting referenced in this release are selective in nature and collected to determine the presence or absence of mineralization and may not be representative of the mineralization hosted on the project.
Figure 5- IP and Resistivity line locations on the Birch Property
Figure 6- Birch project location map with relation to other YMC properties
Qualified Person
The technical content of this news release has been reviewed and approved by Helena Kuikka, P.Geo., VP Exploration for Yukon Metals and a Qualified Person (as defined by National Instrument 43-101).
About Yukon Metals Corp.
Yukon Metals is well financed and represents a property portfolio built on over 30 years of prospecting by the Berdahl family, the prospecting team behind Snowline Gold’s portfolio of primary gold assets. The Yukon Metals portfolio consists primarily of copper-gold and silver-lead-zinc assets, with a substantial gold and silver component. The Company is led by an experienced Board of Directors and Management Team across technical and finance disciplines.
Yukon Metals is focused on fostering sustainable growth and prosperity within Yukon's local communities, while simultaneously enhancing stakeholder value. Our strategy centers around inclusivity and shared prosperity, offering both community members and investors the chance to contribute to, and benefit from, our ventures.
The Yukon
The Yukon ranks 10th most prospective for mineral potential across global jurisdictions according to the Fraser Institute’s 2023 Survey of Mining Companies and is host to a highly experienced and conscientious local workforce, fostered by a long culture of exploration coupled with deep respect for the land. Recent major discoveries with local roots such as Snowline Gold’s Rogue Project - Valley Discovery, demonstrate the Yukon’s potential to generate fresh district-scale mining opportunities.
ON BEHALF OF THE BOARD OF YUKON METALS CORP.
(signed) “Rory Quinn”
For more information, please contact:
Rory Quinn, President & CEO
Email: roryquinn@yukonmetals.com
CAUTIONARY NOTE REGARDING FORWARD-LOOKING INFORMATION
This news release contains certain forward-looking information, including information about the metal association and geology of the prospect area at Birch pointing to the prospectivity for a gold-rich copper porphyry system, significant scale having been demonstrated by a soil anomaly over 1,400 meters long, the potential for economic grades of copper and gold based on grades taken from surface rock chips, the Yukon’s potential to generate fresh district-scale mining opportunities, and the Company’s future plans and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify the forward-looking information. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking information involves significant risks, uncertainties and assumptions. Many factors could cause actual results, performance or achievements to differ materially from those discussed or implied in the forward-looking information. Such factors include, among other things: risks and uncertainties relating to Birch not being a prospective gold-rich copper porphyry system, not having significant scale and a lack of economic grade minerals; the Yukon not having the potential to generate fresh district-scale mining opportunities; and other risks and uncertainties. See the section entitled “Risk Factors” in the Company’s listing statement dated May 30, 2024, available under the Company’s profile on SEDAR+ at www.sedarplus.ca for additional risk factors. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking information. Although the forward-looking information contained in this news release is based upon what management believes to be reasonable assumptions, the Company cannot assure readers that actual results will be consistent with the forward-looking information. The forward-looking information is made as of the date of this news release, and the Company assumes no obligation to update or revise the information to reflect new events or circumstances, except as required by law
References
Israel, S., Murphy, D., Bennett, V., Mortensen, J. and Crowley, J., 2011. New insights into the geology and mineral potential of the Coast Belt in southwestern Yukon. In: Yukon Exploration and Geology 2010, K.E. MacFarlane, L.H. Weston and C. Relf (eds.), Yukon Geological Survey, p. 101-123.
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/64fc59db-8264-4522-a842-e8de3ff0f658
https://www.globenewswire.com/NewsRoom/AttachmentNg/ccc87d28-6430-4adf-ba74-2c5281b3ec88
https://www.globenewswire.com/NewsRoom/AttachmentNg/e421b09b-19e3-40cb-b270-83d992c6f139
https://www.globenewswire.com/NewsRoom/AttachmentNg/965bfe55-1817-458a-9d77-ebf83bc8042e
https://www.globenewswire.com/NewsRoom/AttachmentNg/11a088d5-e2ea-454f-afc5-cbc7adddb346
https://www.globenewswire.com/NewsRoom/AttachmentNg/4b4071d9-e0f7-4b9b-937e-10c517bf3e55
FAQ
What geophysical survey results did Yukon Metals (YMMCF) report at its Birch Property?
What are the highest copper and gold values found in rock chip sampling at YMMCF's Birch Property?
How large is Yukon Metals' (YMMCF) Birch Property and where is it located?
What are the next steps for YMMCF at the Birch Property following the geophysical survey?
