First Mining Expansion Target Drilling Identifies Two New Gold Discoveries at the Duparquet Gold Project
First Mining Gold Corp. (FFMGF) has announced two new gold discoveries at its Duparquet Gold Project in Quebec, Canada from the 2024 Phase 3 diamond drilling program. The Miroir Zone discovery returned 3.12 g/t Au over 19.35 m, while the Aiguille Zone yielded 8.99 g/t Au over 3.1 m.
The drilling program identified 142 mineralized intercepts in 16 drill holes, demonstrating strong continuity between the Central Duparquet and Dumico target areas. The project currently has a mineral resource base of 3.44 Moz Measured & Indicated and 2.64 Moz Inferred resources.
The discoveries expand the CVD target area to a gold mineralization footprint extending 1,700 m east-west in a corridor approximately 500 m wide, with significant depth potential remaining underexplored.
First Mining Gold Corp. (FFMGF) ha annunciato due nuove scoperte d'oro presso il suo progetto Duparquet Gold in Quebec, Canada, provenienti dal programma di perforazione diamantina Fase 3 del 2024. La scoperta della Zona Miroir ha restituito 3.12 g/t Au su 19.35 m, mentre la Zona Aiguille ha prodotto 8.99 g/t Au su 3.1 m.
Il programma di perforazione ha identificato 142 intercettazioni mineralizzate in 16 fori di perforazione, dimostrando una forte continuità tra le aree target Central Duparquet e Dumico. Attualmente, il progetto ha una base di risorse minerali di 3.44 Moz Misurate & Indicate e 2.64 Moz risorse stimate.
Le scoperte espandono l'area target CVD a una superficie di mineralizzazione aurifera che si estende per 1.700 m in direzione est-ovest in un corridoio largo circa 500 m, con un potenziale di profondità significativo ancora da esplorare.
First Mining Gold Corp. (FFMGF) ha anunciado dos nuevos descubrimientos de oro en su proyecto Duparquet Gold en Quebec, Canadá, provenientes del programa de perforación de diamante Fase 3 de 2024. El descubrimiento de la Zona Miroir devolvió 3.12 g/t Au sobre 19.35 m, mientras que la Zona Aiguille produjo 8.99 g/t Au sobre 3.1 m.
El programa de perforación identificó 142 intercepciones mineralizadas en 16 agujeros de perforación, demostrando una fuerte continuidad entre las áreas objetivo Central Duparquet y Dumico. Actualmente, el proyecto tiene una base de recursos minerales de 3.44 Moz Medidos e Indicados y 2.64 Moz recursos inferidos.
Los descubrimientos expanden el área objetivo CVD a una huella de mineralización de oro que se extiende 1.700 m de este a oeste en un corredor de aproximadamente 500 m de ancho, con un potencial de profundidad significativo aún por explorar.
First Mining Gold Corp. (FFMGF)는 2024년 3단계 다이아몬드 채굴 프로그램에서 캐나다 퀘벡의 두파르켓 골드 프로젝트에서 두 가지 새로운 금 발견을 발표했습니다. 미로어 구역 발견은 19.35m에서 3.12g/t Au를 기록했으며, 아이귀유 구역은 3.1m에서 8.99g/t Au를 산출했습니다.
이 채굴 프로그램은 16개의 드릴 홀에서 142개의 광물화된 인터셉트를 식별하여 중앙 두파르켓과 두미코 목표 구역 간의 강한 연속성을 입증했습니다. 현재 이 프로젝트는 측정 및 표시된 자원 3.44Moz와 추정 자원 2.64Moz의 자원 기반을 보유하고 있습니다.
이 발견은 CVD 목표 지역을 동측으로 1,700m에 걸쳐 있는 금 광물화 범위로 확장하여 약 500m 너비의 통로를 형성하고, 아직 탐사되지 않은 잠재적인 깊이를 남겨두고 있습니다.
First Mining Gold Corp. (FFMGF) a annoncé deux nouvelles découvertes d'or dans son projet Duparquet Gold au Québec, Canada, issues du programme de forage diamanté de la Phase 3 de 2024. La découverte de la Zone Miroir a retourné 3,12 g/t Au sur 19,35 m, tandis que la Zone Aiguille a produit 8,99 g/t Au sur 3,1 m.
Le programme de forage a identifié 142 interceptions minéralisées dans 16 trous de forage, démontrant une forte continuité entre les zones cibles Central Duparquet et Dumico. Le projet a actuellement une base de ressources minérales de 3,44 Moz Mesurées & Indiquées et 2,64 Moz de ressources inférées.
Les découvertes étendent la zone cible CVD à une empreinte de minéralisation aurifère s'étendant sur 1 700 m d'est en ouest dans un corridor d'environ 500 m de large, avec un potentiel de profondeur significatif encore inexploré.
First Mining Gold Corp. (FFMGF) hat zwei neue Goldentdeckungen bei seinem Duparquet Gold Projekt in Quebec, Kanada aus dem Bohrprogramm Phase 3 2024 bekannt gegeben. Die Entdeckung der Miroir-Zone lieferte 3,12 g/t Au über 19,35 m, während die Aiguille-Zone 8,99 g/t Au über 3,1 m ergab.
Das Bohrprogramm identifizierte 142 mineralisierte Interzepts in 16 Bohrlöchern und zeigte eine starke Kontinuität zwischen den Zielbereichen Zentral Duparquet und Dumico. Das Projekt hat derzeit eine mineralische Ressourcenbasis von 3,44 Moz Gemessen & Angezeigt und 2,64 Moz geschätzte Ressourcen.
Die Entdeckungen erweitern das CVD-Zielgebiet auf eine Goldmineralisierungsfläche, die sich über 1.700 m in Ost-West-Richtung erstreckt in einem Korridor von etwa 500 m Breite, mit erheblichem Tiefenpotenzial, das noch nicht erkundet wurde.
- Two new high-grade gold discoveries: Miroir Zone (3.12 g/t Au over 19.35 m) and Aiguille Zone (8.99 g/t Au over 3.1 m)
- 142 mineralized intercepts identified, demonstrating strong mineralization continuity
- Existing substantial resource base of 3.44 Moz M&I and 2.64 Moz Inferred
- Expansion of gold mineralization footprint to 1,700m east-west
- None.
- Miroir Discovery – 3.12 g/t Au over 19.35 m occurring 225 m north of the Valentre target
- Aiguille Discovery – 8.99 g/t Au over 3.1 m occurring 150 m south of the Valentre target
- Valentre – 142 Au mineralized intercepts identified, supporting zone continuity between
Central Duparquet and Dumico target areas that demonstrates a robust resource expansion opportunity
First Mining has identified two new discovery gold zones during the expansion drilling at the Valentre target. Assay results for the newly discovered "Miroir Zone", located north of the Valentre target, returned 3.12 g/t Au over 19.35 m, including 5.47 g/t Au over 9.6 m. Further drill results from the program identified a second discovery, the "Aiguille Zone", occurring south of the Valentre target, returning 8.99 g/t Au over 3.1 m. In total, 142* unique mineralized intercepts in 16 drill holes have been encountered in the Valentre expansion area, including the new discoveries at Miroir and Aiguille. These new drill results support a strong continuity in mineralization within the
"The discovery of these two new gold zones at our Duparquet Gold Project demonstrates the continued success of our exploration program at the Project," stated Dan Wilton, CEO of First Mining. "With more than two full exploration seasons now under our belt at
A map highlighting the target locations in the CVD area, including Miroir and Aiguille, as well as locations of recent drill holes is presented in Figure 1, and corresponding assay highlights are presented in Table 1, with full assay results listed in Table 2 and drill hole locations in Table 3.
*Represents all intercepts reporting above 0.4 g/t Au over 3 m in the CVD area, supporting mineralization continuity
Table 1: Selected Significant Drill Intercepts, 2024 Phase 3 Drill Program – CVD Target Area
Hole ID | From (m) | To (m) | Length (m) | Grade (Au g/t) | Target | |
DUP24-035 | 93.0 | 100.0 | 7.0 | 2.07 | Valentre | |
DUP24-035 | inc. | 95.0 | 96.0 | 1.0 | 8.88 | Valentre |
DUP24-035 | 157.3 | 160.5 | 3.2 | 4.14 | Valentre | |
DUP24-035 | inc. | 159.4 | 160.0 | 0.6 | 9.42 | Valentre |
DUP24-036 | 215.2 | 225.4 | 10.2 | 3.27 | Valentre | |
DUP24-036 | inc. | 220.5 | 225.4 | 4.9 | 5.23 | Valentre |
DUP24-037 | 72.75 | 82.9 | 10.15 | 2.11 | Valentre | |
DUP24-038 | 83.0 | 85.2 | 2.2 | 12.46 | Valentre | |
DUP24-038 | inc. | 84.45 | 85.2 | 0.75 | 27.40 | Valentre |
DUP24-041 | 169.90 | 185.0 | 15.1 | 3.54 | Central Duparquet | |
DUP24-041 | inc. | 177.35 | 184.0 | 6.65 | 5.53 | Central Duparquet |
DUP24-041 | 353.1 | 364.15 | 11.05 | 1.87 | Aiguille | |
DUP24-041 | inc. | 359.1 | 359.8 | 0.7 | 8.35 | Aiguille |
DUP24-043 | 308.84 | 326.32 | 17.48 | 2.16 | Valentre | |
DUP24-043 | inc. | 314.56 | 318.52 | 3.96 | 4.55 | Valentre |
DUP24-043 | and inc. | 325.79 | 326.32 | 0.53 | 11.80 | Valentre |
DUP24-044 | 545.9 | 549.0 | 3.1 | 8.99 | Aiguille | |
DUP24-044 | inc. | 548.0 | 549.0 | 1.0 | 15.50 | Aiguille |
DUP24-048 | 6.75 | 26.1 | 19.35 | 3.12 | Miroir | |
DUP24-048 | inc. | 15.5 | 25.1 | 9.6 | 5.47 | Miroir |
DUP24-048 | inc. | 22.1 | 25.1 | 3.0 | 11.26 | Miroir |
*Reported intervals are drilled core lengths (true widths are estimated at 75
Upcoming Duparquet Exploration Programs
A portion of the upcoming drill programs will be focused at the newly discovered Miroir and Aiguille discovery zones, where the aim is to continue advancing and drill testing the exploration potential along strike and at depth (Figure 2). The CVD area has returned significant upside and value to the
"For 2025, our team is planning for increased drilling programs that will capitalize on our momentum through a continued opening of the exploration space at
The 2024 drilling program at the CVD area totalled 16 holes and 4,644 m. The CVD drilling campaign was aimed at testing approximately 200 m of strike length at the targeted area, which has demonstrated significant potential for resource expansion through on-strike extension drilling and north and south step-outs within the CVD area (Figure 2). Expanding the exploration search space is a core aspect of the growth strategy for the Project, including the evaluation of areas that have never been drill tested. Recent results in the CVD area have demonstrated a high degree of mineralization continuity, along with two new gold discoveries (Miroir and Aiguille), located to the north and south of the Valentre target. These results have expanded the CVD target area, which now boasts a gold mineralization footprint extending 1,700 m east-west in a corridor approximately 500 m wide. The depth potential remains largely underexplored, presenting significant opportunities for further evaluation.
Additional Details on CVD, Aiguille, and Miroir Drilling
CVD
The Valentre portion of the CVD drilling strategy has been focused on targeting the mineralization continuity of multiple gold zones that occur within an underexplored area east of the main
Recent results from the 2024 drilling programs have returned further supporting intercepts which include 3.27 g/t Au over 10.2 m from 215.2 m to 225.4 m in drill hole DUP24-036, 2.11 g/t Au over 10.15 m from 72.75 m to 82.9 m in drill hole DUP24-037, and 2.16 g/t Au over 17.48 m including 3.96 g/t Au over 4 m from 314.56 m to 318.52 m, and including 11.80 g/t Au over 0.53 m from 325.79 m to 326.32 m in drill hole DUP24-043 (Figure 3). The drill data collected to date is now being integrated into updated geoscience models, aimed at developing new and refined wireframes within the trend. These updates will support potential resource additions while targeting higher-grade zones for exploration at depth where the target remains open.
The
Gold mineralization at the CVD area is hosted within mineralized silica- and sericite-altered syenite units with very fine-grained disseminated pyrite ranging from 0.5 -
Miroir
The new gold discovery, Miroir, was identified during the recent Valentre expansion drilling. Drill hole DUP24-048 was collared 250 metres to the north of Valentre in an effort to step back and drill under areas of previous drilling success at Valentre (see press release dated August 28, 2024), and to intersect the underexplored northern contact of the mafic volcanic-syenite contact area which has demonstrated a stronger affinity for higher-grade mineralization in the North Zone target area of the Project. The Miroir zone is located 225 m to the north of the Valentre target and is initially intercepted at bedrock level, making it an extremely encouraging shallow exploration opportunity for further advancement (Figure 5). Assays from drill hole DUP24-048 in the Miroir zone returned 3.12 g/t Au over 19.35 m from 6.75 m to 26.10 m, including 5.47 g/t Au over 9.60 m from 15.5 m to 25.1 m (Figure 4).
Miroir mineralization is hosted within a silica-altered basalt unit with up to
Aiguille
The second new gold discovery, Aiguille, was also identified during the 2024 follow-up drilling at Valentre. Drill hole DUP24-041 was extended beyond the target depth by site geologists, owing to a change in the expected geology surrounding Valentre identified during the drilling. Lithologies intersected were syenite units with favourable sericite alteration and fine-grained disseminated pyrite sulphide mineralization, which were fairly continuous in an area where volcanic lithologies are typically intruded by lesser syenite units and bounded by gabbro. A geoscience-driven extension of this drill hole resulted in the discovery of the Aiguille zone, with hole DUP24-041 returning 1.87 g/t Au over 11.05 m from 353.1 m to 364.15 m, including 8.35 g/t Au over 0.7 m from 359.1 m to 359.8 m. An adjustment in the next CVD hole delivered even more favourable results, with hole DUP24-044 returning 8.99 g/t Au over 3.10 m from 545.9 m to 549.0 m, including 15.5 g/t Au over 1.0 m from 548 m to 549 m (Figure 6).
The discovery zone is located 150 m south of the main Valentre area and remains significantly underexplored, promoting positive opportunities for further drilling at Aiguille with a focus on delineating additional zones and an area for further expansion, at relatively higher grades for the Project. Aiguille mineralization is hosted within silica- and sericite-altered syenite units and graphitic argillite, with fine-grained disseminated pyrite mineralization up to
Table 2: Phase 3 Valentre,
Hole ID | From (m) | To (m) | Length (m) | Grade (Au g/t) | Target | |
DUP24-034 | 18.75 | 19.50 | 0.75 | 0.79 | Valentre | |
DUP24-034 | 24.75 | 25.55 | 0.80 | 0.53 | ||
DUP24-034 | 32.40 | 41.00 | 8.60 | 0.55 | ||
DUP24-034 | 46.85 | 48.25 | 1.40 | 0.77 | ||
DUP24-034 | 52.00 | 53.00 | 1.00 | 0.46 | ||
DUP24-035 | 34.85 | 35.60 | 0.75 | 0.65 | Valentre | |
DUP24-035 | 82.70 | 83.55 | 0.85 | 0.44 | ||
DUP24-035 | 88.50 | 89.30 | 0.80 | 0.41 | ||
DUP24-035 | 93.00 | 100.00 | 7.00 | 2.07 | ||
DUP24-035 | inc. | 95.00 | 96.00 | 1.00 | 8.88 | |
DUP24-035 | 115.10 | 116.80 | 1.70 | 0.44 | ||
DUP24-035 | 133.10 | 140.25 | 7.15 | 1.34 | ||
DUP24-035 | 157.30 | 160.50 | 3.20 | 4.14 | ||
DUP24-035 | inc. | 159.40 | 160.00 | 0.60 | 9.42 | |
DUP24-036 | 113.00 | 114.00 | 1.00 | 0.60 | Valentre | |
DUP24-036 | 128.00 | 129.00 | 1.00 | 0.45 | ||
DUP24-036 | 147.55 | 148.45 | 0.90 | 0.40 | ||
DUP24-036 | 156.75 | 160.00 | 3.25 | 0.43 | ||
DUP24-036 | 164.65 | 165.30 | 0.65 | 0.58 | ||
DUP24-036 | 179.00 | 181.00 | 2.00 | 1.16 | ||
DUP24-036 | 186.50 | 187.50 | 1.00 | 0.45 | ||
DUP24-036 | 199.95 | 201.25 | 1.30 | 0.71 | ||
DUP24-036 | 215.20 | 225.40 | 10.20 | 3.27 | ||
DUP24-036 | inc. | 220.50 | 225.40 | 4.90 | 5.23 | |
DUP24-037 | 23.00 | 25.00 | 2.00 | 0.85 | Valentre | |
DUP24-037 | 29.00 | 30.00 | 1.00 | 0.50 | ||
DUP24-037 | 38.40 | 39.40 | 1.00 | 1.32 | ||
DUP24-037 | 62.35 | 68.25 | 5.90 | 1.07 | ||
DUP24-037 | 72.75 | 82.90 | 10.15 | 2.11 | ||
DUP24-038 | 16.65 | 19.15 | 2.50 | 0.52 |
Valentre | |
DUP24-038 | 24.00 | 25.00 | 1.00 | 1.16 | ||
DUP24-038 | 35.00 | 36.00 | 1.00 | 0.58 | ||
DUP24-038 | 77.25 | 78.00 | 0.75 | 1.25 | ||
DUP24-038 | 83.00 | 85.20 | 2.20 | 12.46 | ||
DUP24-038 | inc. | 84.45 | 85.20 | 0.75 | 27.40 | |
DUP24-038 | 107.85 | 119.00 | 11.15 | 0.87 | ||
DUP24-038 | 131.00 | 131.95 | 0.95 | 0.68 | ||
DUP24-038 | 184.00 | 186.40 | 2.40 | 0.64 | ||
DUP24-039 | 25.00 | 26.00 | 1.00 | 0.45 | Valentre | |
DUP24-039 | 37.00 | 37.85 | 0.85 | 0.47 | ||
DUP24-039 | 109.10 | 118.25 | 9.15 | 0.65 | ||
DUP24-039 | 133.65 | 134.45 | 0.80 | 0.44 | ||
DUP24-039 | 180.40 | 181.40 | 1.00 | 0.43 | ||
DUP24-040 | 22.00 | 23.70 | 1.70 | 0.54 | Dumico | |
DUP24-040 | 34.00 | 34.70 | 0.70 | 0.88 | ||
DUP24-040 | 87.75 | 88.45 | 0.70 | 0.57 | Valentre | |
DUP24-040 | 107.70 | 108.40 | 0.70 | 0.42 | ||
DUP24-040 | 155.00 | 159.00 | 4.00 | 0.87 | ||
DUP24-040 | 166.00 | 166.75 | 0.75 | 0.90 | ||
DUP24-040 | 181.00 | 186.50 | 5.50 | 0.63 | ||
DUP24-041 | 134.00 | 135.80 | 1.80 | 3.33 | ||
DUP24-041 | 169.90 | 185.00 | 15.10 | 3.54 | ||
DUP24-041 | inc. | 177.35 | 184.00 | 6.65 | 5.53 | |
DUP24-041 | 191.00 | 196.00 | 5.00 | 0.83 | ||
DUP24-041 | 201.50 | 211.00 | 9.50 | 1.92 | ||
DUP24-041 | inc. | 204.00 | 205.00 | 1.00 | 7.23 | |
DUP24-041 | 219.30 | 224.05 | 4.75 | 1.01 | ||
DUP24-041 | 299.65 | 300.35 | 0.70 | 0.50 | ||
DUP24-041 | 353.10 | 364.15 | 11.05 | 1.87 | Aiguille | |
DUP24-041 | inc. | 359.10 | 359.80 | 0.70 | 8.35 | |
DUP24-043 | 107.30 | 107.85 | 0.55 | 1.03 | Valentre | |
DUP24-043 | 248.20 | 249.20 | 1.00 | 0.57 | ||
DUP24-043 | 294.54 | 295.76 | 1.22 | 0.51 | ||
DUP24-043 | 308.84 | 326.32 | 17.48 | 2.16 | ||
DUP24-043 | inc. | 314.56 | 318.52 | 3.96 | 4.55 | |
DUP24-043 | and | 325.79 | 326.32 | 0.53 | 11.80 | |
DUP24-043 | 329.65 | 335.17 | 5.52 | 1.62 | ||
DUP24-043 | 345.30 | 346.39 | 1.09 | 1.08 | ||
DUP24-043 | 351.82 | 372.63 | 20.81 | 1.56 | ||
DUP24-043 | inc. | 357.96 | 365.74 | 7.78 | 3.31 | |
DUP24-043 | 422.34 | 422.93 | 0.59 | 0.44 | ||
DUP24-043 | 429.02 | 431.02 | 2.00 | 0.97 | ||
DUP24-043 | 442.05 | 445.74 | 3.69 | 2.00 | ||
DUP24-043 | 454.85 | 455.44 | 0.59 | 0.75 | ||
DUP24-044 | 11.00 | 11.90 | 0.90 | 0.59 | ||
DUP24-044 | 35.00 | 41.00 | 6.00 | 1.73 | ||
DUP24-044 | 286.00 | 288.15 | 2.15 | 1.00 | ||
DUP24-044 | 301.30 | 305.00 | 3.70 | 1.82 | ||
DUP24-044 | 321.00 | 340.00 | 19.00 | 1.13 | ||
DUP24-044 | 345.00 | 360.00 | 15.00 | 1.27 | ||
DUP24-044 | inc. | 355.00 | 356.20 | 1.20 | 7.09 | |
DUP24-044 | 377.45 | 378.00 | 0.55 | 0.55 | ||
DUP24-044 | 403.50 | 404.00 | 0.50 | 4.66 | ||
DUP24-044 | 473.50 | 474.50 | 1.00 | 0.98 | Aiguille | |
DUP24-044 | 500.40 | 501.00 | 0.60 | 3.33 | ||
DUP24-044 | 540.90 | 541.90 | 1.00 | 0.40 | ||
DUP24-044 | 545.90 | 549.00 | 3.10 | 8.99 | ||
DUP24-044 | inc. | 548.00 | 549.00 | 1.00 | 15.50 | |
DUP24-047 | 33.80 | 34.50 | 0.70 | 0.54 | Dumico | |
DUP24-047 | 48.00 | 50.00 | 2.00 | 0.62 | ||
DUP24-047 | 55.00 | 56.00 | 1.00 | 0.50 | ||
DUP24-047 | 59.00 | 60.95 | 1.95 | 1.81 | ||
DUP24-047 | 103.00 | 106.45 | 3.45 | 1.22 | ||
DUP24-047 | 114.00 | 115.10 | 1.10 | 0.61 | ||
DUP24-047 | 210.50 | 214.45 | 3.95 | 0.75 | ||
DUP24-047 | 218.50 | 219.50 | 1.00 | 0.69 | ||
DUP24-047 | 226.00 | 228.00 | 2.00 | 0.75 | ||
DUP24-047 | 235.20 | 246.00 | 10.80 | 1.56 | ||
DUP24-047 | inc. | 237.00 | 242.00 | 5.00 | 2.86 | |
DUP24-047 | inc. | 238.00 | 239.00 | 1.00 | 6.84 | |
DUP24-047 | 251.40 | 255.00 | 3.60 | 1.32 | ||
DUP24-047 | 266.25 | 266.85 | 0.60 | 1.18 | ||
DUP24-047 | 271.00 | 274.00 | 3.00 | 1.55 | ||
DUP24-047 | 355.00 | 356.50 | 1.50 | 0.86 | ||
DUP24-047 | 359.00 | 359.75 | 0.75 | 0.73 | ||
DUP24-047 | 371.05 | 371.80 | 0.75 | 0.42 | ||
DUP24-047 | 382.25 | 382.75 | 0.50 | 3.13 | ||
DUP24-047 | 387.00 | 388.00 | 1.00 | 0.40 | ||
DUP24-047 | 411.00 | 411.70 | 0.70 | 0.45 | ||
DUP24-048 | 6.75 | 26.10 | 19.35 | 3.12 | Miroir | |
DUP24-048 | inc. | 18.50 | 25.10 | 6.60 | 6.97 | |
DUP24-048 | inc. | 22.10 | 25.10 | 3.00 | 11.26 | |
DUP24-048 | 68.00 | 69.00 | 1.00 | 1.04 | Dumico | |
DUP24-048 | 81.00 | 82.00 | 1.00 | 1.61 | ||
DUP24-048 | 217.40 | 218.60 | 1.20 | 1.13 | ||
DUP24-048 | 241.00 | 241.50 | 0.50 | 0.61 | Valentre | |
DUP24-048 | 255.30 | 257.70 | 2.40 | 0.41 | ||
DUP24-048 | 269.00 | 270.00 | 1.00 | 0.87 | ||
DUP24-048 | 273.00 | 281.30 | 8.30 | 0.65 | ||
DUP24-048 | inc. | 273.00 | 275.00 | 2.00 | 1.77 | |
DUP24-048 | 289.00 | 290.50 | 1.50 | 0.70 | ||
DUP24-048 | 318.80 | 319.50 | 0.70 | 1.37 | ||
DUP24-048 | 343.70 | 356.00 | 12.30 | 1.75 | ||
DUP24-048 | inc. | 346.10 | 354.25 | 8.15 | 2.50 | |
DUP24-048 | inc. | 348.85 | 351.00 | 2.15 | 6.14 |
*Reported intervals are drilled core lengths (true widths are estimated at 75
Table 3: Phase 3 Drill Hole Locations, Valentre and Central Duparquet Targets
Hole ID | Azimuth (°) | Dip (°) | Length (m) | Easting | Northing |
DUP24-034 | 180 | -45 | 99 | 633402 | 5373823 |
DUP24-035 | 180 | -68 | 201 | 633406 | 5373864 |
DUP24-036 | 180 | -57 | 288 | 633471 | 5373931 |
DUP24-037 | 180 | -47 | 141 | 633450 | 5373834 |
DUP24-038 | 180 | -50 | 195 | 633520 | 5373867 |
DUP24-039 | 180 | -45 | 195 | 633580 | 5373864 |
DUP24-040 | 180 | -45 | 261 | 633587 | 53739122 |
DUP24-041 | 195 | -65 | 462 | 633311 | 5373895 |
DUP24-043 | 175 | -55 | 534 | 633406 | 5374053 |
DUP24-044 | 180 | -47 | 600 | 633317 | 5374059 |
DUP24-047 | 180 | -60 | 453 | 633733 | 5374033 |
DUP24-048 | 180 | -55 | 402 | 633594 | 5374045 |
Note: Collar coordinates in UTM NAD 83 z17
About the Duparquet Gold Project
The Duparquet Project is geologically situated in the southern part of the Abitibi Greenstone Belt and is geographically located approximately 50 km north of the city of
The Duparquet Project totals approximately 5,800 hectares focused on an area of 19 km of strike length along the prolific Destor-Porcupine Fault Zone, along with numerous mineralized splays and influential secondary lineaments. The Duparquet Project includes the past-producing Beattie, Donchester and Duquesne mines as well as the
1 Further details on the Duparquet PEA can be found in the technical report entitled "NI 43-101 Technical Report: Preliminary Economic Assessment, Duparquet Gold Project, |
Analytical Laboratory and QA/QC Procedures
All sampling completed by First Mining within its exploration programs is subject to a Company standard of internal quality control and quality assurance (QA/QC) programs which include the insertion of certified reference materials, blank materials and a level of duplicate analysis. Core samples from the 2024 drilling program at
Qualified Person
James Maxwell, P.Geo., VP, Exploration and Project Operations for First Mining, is a "Qualified Person" for the purposes of NI 43-101 Standards of Disclosure for Mineral Projects and has reviewed and approved the scientific and technical disclosure contained in this news release.
About First Mining Gold Corp.
First Mining is a gold developer advancing two of the largest gold projects in
First Mining was established in 2015 by Mr. Keith Neumeyer, founding President and CEO of First Majestic Silver Corp.
ON BEHALF OF FIRST MINING GOLD CORP.
Daniel W. Wilton
Chief Executive Officer and Director
Cautionary Note Regarding Forward-Looking Statements
This news release includes certain "forward-looking information" and "forward-looking statements" (collectively "forward-looking statements") within the meaning of applicable Canadian and
Forward-looking statements in this news release relate to future events or future performance and reflect current estimates, predictions, expectations or beliefs regarding future events. All forward-looking statements are based on First Mining's or its consultants' current beliefs as well as various assumptions made by them and information currently available to them. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Forward-looking statements reflect the beliefs, opinions and projections on the date the statements are made and are based upon a number of assumptions and estimates that, while considered reasonable by the respective parties, are inherently subject to significant business, economic, competitive, political and social uncertainties and contingencies. Such factors include, without limitation the Company's business, operations and financial condition potentially being materially adversely affected by the outbreak of epidemics, pandemics or other health crises, and by reactions by government and private actors to such outbreaks; risks to employee health and safety as a result of the outbreak of epidemics, pandemics or other health crises, that may result in a slowdown or temporary suspension of operations at some or all of the Company's mineral properties as well as its head office; fluctuations in the spot and forward price of gold, silver, base metals or certain other commodities; fluctuations in the currency markets (such as the Canadian dollar versus the
First Mining cautions that the foregoing list of factors that may affect future results is not exhaustive. When relying on our forward-looking statements to make decisions with respect to First Mining, investors and others should carefully consider the foregoing factors and other uncertainties and potential events. First Mining does not undertake to update any forward-looking statement, whether written or oral, that may be made from time to time by the Company or on our behalf, except as required by law.
Cautionary Note to United States Investors
The Company is a "foreign private issuer" as defined in Rule 3b-4 under the United States Securities Exchange Act of 1934, as amended, and is eligible to rely upon the
Technical disclosure contained in this news release has not been prepared in accordance with the requirements of
NI 43-101 is a rule developed by the Canadian Securities Administrators that establishes standards for all public disclosure an issuer makes of scientific and technical information concerning the issuer's material mineral projects.
View original content to download multimedia:https://www.prnewswire.com/news-releases/first-mining-expansion-target-drilling-identifies-two-new-gold-discoveries-at-the-duparquet-gold-project-302354859.html
SOURCE First Mining Gold Corp.
FAQ
What are the grades of the new gold discoveries at FFMGF's Duparquet Project in 2024?
How many mineralized intercepts did FFMGF identify in the 2024 Phase 3 drilling program?
What is the current mineral resource base at FFMGF's Duparquet Project?