New Applied Materials Technologies Help Leading Silicon Carbide Chipmakers Accelerate the Transition to 200mm Wafers and Increase Chip Performance and Power Efficiency
Applied Materials has introduced advanced solutions to facilitate the transition of silicon carbide (SiC) chipmakers from 150mm to 200mm wafer production, effectively doubling die output. The company's new 200mm CMP system enhances chip performance and yield by significantly reducing surface roughness. Additionally, Applied's hot implant technology optimizes ion implantation, resulting in a 40X reduction in resistivity. These innovations aim to meet the rising demand for efficient SiC power semiconductors essential in electric vehicle powertrains.
- Introduction of new 200mm CMP system enhances chip performance and yield.
- Hot implant technology provides more than 40X reduction in resistivity, optimizing SiC chip efficiency.
- Transition from 150mm to 200mm wafers approximately doubles die output per wafer.
- None.
- Key to the world’s best electric vehicle power trains, silicon carbide chips are transitioning to larger, 200mm wafers which boost output to meet growing global demand
- Applied’s new 200mm CMP system precisely removes silicon carbide material from wafers to help maximize chip performance, reliability and yield
- Applied’s new “hot implant” technology for silicon carbide chips injects ions with minimum damage to crystalline structures, thereby maximizing power generation and device yield
SANTA CLARA, Calif., Sept. 08, 2021 (GLOBE NEWSWIRE) -- Applied Materials, Inc. today announced new products that help enable the world’s leading silicon carbide (SiC) chipmakers transition from 150mm wafer production to 200mm production, which approximately doubles die output per wafer, to help satisfy the world’s growing demand for premium electric vehicle powertrains.
SiC power semiconductors are in high demand because they help efficiently convert battery power to torque, thereby increasing vehicle performance and range. Compared to silicon, SiC is inherently harder with natural defects that can lead to degradation of electrical performance, power efficiency, reliability and yield. Advanced materials engineering is needed to optimize raw wafers for production and build circuits with minimum damage to the crystal lattice.
“To fuel the computer revolution, chipmakers moved to ever-larger wafer sizes, dramatically increasing chip output to satisfy burgeoning global demand,” said Sundar Ramamurthy, Group Vice President and General Manager of the ICAPS group at Applied Materials. “Today we are in the early stages of another revolution that will benefit from Applied’s expertise in materials engineering at an industrial scale.”
“Electrification of the transportation industry is a rising trend, and we are accelerating this inflection point by leading the global transition from silicon to silicon carbide with our Wolfspeed technology,” said Gregg Lowe, President and CEO of Cree, Inc. “Delivering the highest-performing silicon carbide power devices on larger 200mm wafers enables us to increase end-customer value and meet growing demand.”
“Applied’s support in helping speed qualification of 200mm processes in Albany and multi-equipment installations at our Mohawk Valley Fab is expediting this transition,” Lowe added. “Moreover, new technologies being developed by Applied’s ICAPS team, such as hot implant, have broadened and deepened our technical collaboration and helped accelerate our power technology roadmap.”
New 200mm SiC CMP System
SiC wafer surface quality is critically important to SiC device fabrication as any defects on the surface of the wafer will migrate through the subsequent layers. To produce uniform wafers with the highest quality surfaces, Applied has developed the Mirra® Durum™ CMP* system which integrates polishing, measurement of material removal, cleaning and drying in a single system. The new system has demonstrated a 50X reduction in finished wafer surface roughness as compared to mechanically grinded SiC wafers and a 3X reduction in roughness compared to batch CMP processing systems.
Hot Implant Increases SiC Chip Performance and Power Efficiency
During SiC chip fabrication, ion implantation places dopants within the material to help enable and direct the flow of current within the high power producing circuits. The density and hardness of SiC material makes it extremely challenging to inject, accurately place and activate the dopants while minimizing damage to the crystal lattice which reduces performance and power efficiency. Applied has solved this challenge with its new VIISta® 900 3D hot ion implant system for 150mm and 200mm SiC wafers. The hot implant technology injects ions with minimal damage to the lattice structure, resulting in a more than 40X reduction in resistivity compared to implant at room temperature.
Applied’s ICAPS (IoT, Communications, Automotive, Power and Sensors) business is developing additional products for the SiC power chip market including in PVD*, CVD*, etch and process control. Additional details on how Applied is enabling advancements in SiC and other specialty semiconductor technologies will be discussed at the company’s 2021 ICAPS and Packaging Master Class being held today.
About Applied Materials
Applied Materials, Inc. (Nasdaq: AMAT) is the leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. Our expertise in modifying materials at atomic levels and on an industrial scale enables customers to transform possibilities into reality. At Applied Materials, our innovations make possible a better future. Learn more at www.appliedmaterials.com.
*CMP = chemical mechanical planarization. PVD = physical vapor deposition. CVD = chemical vapor deposition.
Contact:
Ricky Gradwohl (editorial/media) 408.235.4676
Michael Sullivan (financial community) 408.986.7977
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/add820f0-0e08-499b-a903-209ffaede712
https://www.globenewswire.com/NewsRoom/AttachmentNg/cdcb6c1c-55ed-4247-8b13-8ae2a397d3a6
These photos are also available at Newscom, www.newscom.com, and via AP PhotoExpress.
FAQ
What new products has Applied Materials announced related to silicon carbide chips?
How do the new technologies from Applied Materials impact electric vehicle powertrains?
What is the significance of transitioning from 150mm to 200mm wafers?
How does the hot implant technology work?
