Talisker Samples Up to 97.7 g/t Au at the Ladner Gold Project

Rhea-AI Summary

Talisker Resources announces high-grade gold results from Ladner Gold Project, with up to 97.7 g/t Au. The summer 2023 sampling campaign yielded promising findings, including 78.3% of samples being anomalous for gold and 13.7% yielding more than 1.5 g/t Au. The top result was a composite sample of sheeted quartz veins in aphanitic andesite, producing 97.70 g/t Au. The company plans to expand known mineralization and target new ore zones at the Ladner Gold Project.

TORONTO, April 15, 2024 (GLOBE NEWSWIRE) -- Talisker Resources Ltd. (“Talisker” or the “Company”) (TSX:TSK | OTCQX:TSKFF) is pleased to announce results from its summer 2023 mapping and surface sampling campaign at the Ladner Gold Project.

A total of 175 rock samples were collected between mid June and mid September 2023 by a small mapping team. The focus of the mapping was centered on the areas of known mineralization adjacent to the historic Carolin underground mine and the McMaster prospect. Mapping and sampling targeted major lithological contacts between the lower Ladner Group sediments, the Spider Peak volcanic succession, and the Coquihalla serpentine unit.

Of the 175 rock samples collected, 137 samples (78.3%) were anomalous for gold, 88 samples (50.3%) yielded above 0.1 g/t Au, 40 samples (22.8%) yielded above 0.5 g/t Au and 24 samples (13.7%) yielded more than 1.50 g/t Au. The top 24 samples are displayed in Table 1 and include six samples (3.4%) that showed gold values above 6 g/t gold. The top result was a composite sample of sheeted quartz veins in aphanitic andesite which produced 97.70 g/t Au.

The 2023 samples were collected from quartz vein structures, semi-massive to massive sulfide occurrences, or strong alteration zones. The veins on the Ladner Gold Project are observed to be coarse-crystalline mesothermal veins with a low percentage of sulfide minerals. The dominant alteration assemblage associated with gold is silica, albite, iron-carbonate, and sericite. The dominant sulfides associated with gold are pyrite>arsenopyrite>pyrrhotite, which combined average less than 2% in observed veins, and greater than 15% in massive sulfide zones.

Structural observations and data collection show an architecture of isoclinal folding in the Ladner sediments and Spider Peak volcanics. Quartz veins infill a variety of low-pressure zones including bedding-parallel, bedding oblique due to progressive shearing, within the plunge of fold hinges, and axial planar to the isoclinal folds. Additionally, preliminary observations suggest a later fold event resulting in broad open folds of low amplitude in the bedding strike orientation. The above observations are key to expanding known mineralization and targeting new ore zones in the historic Ladner Gold Project.

Terry Harbort, Talisker’s President and CEO commented, "We are very pleased with these preliminary results from Ladner and the demonstrated consistency of gold grades across a broad area. Our sampling indicates there are additional mineralized zones in the same setting as the Caroline mine, along strike, yet to be fully explored. Once we have brought our flagship Bralorne Gold Project into production, we are looking forward to returning to the Ladner Gold Project to expand the known mineralization.”

Table 1: Ladner Gold Project – 2023 Rock Samples >1.5 g/t Au
Sample Number	Gold (g/t)	Analytical Method	Sample Type
C315037	97.70	Au-GRA21	Composite
C315045	13.40	Au-GRA21	Select
C315047	11.60	Au-GRA21	Chip-Channel
C315026	9.85	Au-AA23	Select
C315107	7.39	Au-AA23	Select
C315038	6.46	Au-AA23	Select
C315046	5.34	Au-AA23	Chip-Channel
C315139	5.07	Au-AA23	Composite
C315006	4.68	Au-AA23	Select
C315114	4.30	Au-AA23	Select
C315073	3.96	Au-AA23	Select
C315027	3.88	Au-AA23	Select
C315168	3.86	Au-AA23	Select
C315111	3.33	Au-AA23	Select
C315092	3.08	Au-AA23	Composite
C315128	3.07	Au-AA23	Composite
C315025	2.77	Au-AA23	Composite
C315122	2.72	Au-AA23	Select
C315048	2.39	Au-AA23	Chip-Channel
C315169	2.36	Au-AA23	Select
C315181	2.09	Au-AA23	Composite
C315049	1.85	Au-AA23	Chip-Channel
C315115	1.80	Au-AA23	Select
C315053	1.66	Au-AA23	Chip-Channel

Qualified Person

The technical information contained in this news release relating to the sample results at the Ladner Gold Project has been approved by Leonardo de Souza (BSc, AusIMM (CP) Membership 224827), Talisker's Vice President, Exploration and Resource Development, who is a "qualified person" within the meaning of National Instrument 43-101, Standards of Disclosure for Mineral Projects.

For further information, please contact:

Terry Harbort President and CEO terry.harbort@taliskerresources.com +1 416 357 0227

Matt Filgate Vice President, Corporate Development matt.filgate@taliskerresources.com +1 778 679 3579

About Talisker Resources Ltd.

Talisker (taliskerresources.com) is a junior resource company involved in the exploration and development of gold projects in British Columbia, Canada. Talisker’s flagship asset is the high-grade, fully permitted Bralorne Gold Project where the Company is currently transitioning into underground production at the Mustang Mine. Talisker projects also include the Ladner Gold Project, an advanced stage project with significant exploration potential from an historical high-grade producing gold mine and the Spences Bridge Project where the Company holds ~85% of the emerging Spences Bridge Gold Belt, and several other early-stage Greenfields projects.

Sample Preparation and QAQC

Rock samples at the Ladner project are collected from zones identified by Company geologists as likely hydrothermally affected. Three types of samples were collected during the 2023 campaign: Grab, Select, Composite, and Channel. Grab samples are taken to be non-selective and roughly representative of the outcrop / rock exposure. Select samples are chosen to highlight certain structures, mineralization, or alteration and may not be representative of the character or distribution of the local rock exposure. Composite samples are equivalent to Select samples, except that multiple structures, mineralized zones, or alteration zones from the same rock exposure have been combined into one sample. All channel samples during the 2023 Ladner program were collected as chip-channels whereby a manual or mechanical chisel was used to collect a 1-metre long, horizontal chip sample of approximately 3cm width and roughly 1cm depth. All samples are focused on an interval of interest such as a vein, zone of mineralization, or zone of alteration. Samples are a minimum of 500 grams in weight and averaged 1,786 grams during the 2023 program. Unmarked certified reference materials (CRMs and blanks) are inserted into the sample sequence and make up 11% of the samples submitted to the lab for rock samples reported in this release. Sample preparation and analyses are carried out by ALS Global in North Vancouver, British Columbia, Canada. Rock sample preparation includes sample drying, fine crushing of the sample to at least 70% passing 2 mm, sample splitting to 250 grams using a riffle splitter, and pulverizing the split to at least 85% passing 75 microns (ALS code PREP-31). Gold in rock samples is analyzed by fire assay and atomic absorption spectroscopy (AAS) of a 30g sample (ALS code Au-AA23), while multi-element chemistry is analyzed using lab code ME-MS61 which is 4- Acid digestion of a 0.25 g sample split with detection by inductively coupled plasma mass spectrometer (ICP-MS) for 48 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr). Gold assay technique (ALS code Au-AA23) has an upper detection limit of 10 g/t. Any sample that produces an over-limit gold value via the gold assay technique is sent for gravimetric finish (ALS method Au-GRA21) which has an upper detection limit of 10,000 g/t Au.

Caution Regarding Forward Looking Statements

Certain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words “could”, “intend”, “expect”, “believe”, “will”, “projected”, “estimated” and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on Talisker’s current belief or assumptions as to the outcome and timing of such future events. Various assumptions or factors are typically applied in drawing conclusions or making the forecasts or projections set out in forward-looking information. Those assumptions and factors are based on information currently available to Talisker. Although such statements are based on reasonable assumptions of Talisker’s management, there can be no assurance that any conclusions or forecasts will prove to be accurate.

Forward looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions, access and supply risks, reliance on key personnel, operational risks regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks, title and environmental risks and risks relating to the failure to receive all requisite shareholder and regulatory approvals.

The forward-looking information contained in this release is made as of the date hereof, and Talisker is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/ace3ddea-5c0f-43c4-9150-9b7d5c2d0530

FAQ

What were the top gold values found at the Ladner Gold Project in the 2023 sampling campaign?

The top gold value found at the Ladner Gold Project in the 2023 sampling campaign was 97.70 g/t Au in a composite sample of sheeted quartz veins in aphanitic andesite.

What percentage of rock samples collected were anomalous for gold at the Ladner Gold Project in 2023?

78.3% of the rock samples collected at the Ladner Gold Project in 2023 were anomalous for gold.

Who is the qualified person responsible for the technical information regarding the sample results at the Ladner Gold Project?

The qualified person responsible for the technical information regarding the sample results at the Ladner Gold Project is Leonardo de Souza, Talisker's Vice President, Exploration and Resource Development.

What is the dominant alteration assemblage associated with gold at the Ladner Gold Project?

The dominant alteration assemblage associated with gold at the Ladner Gold Project includes silica, albite, iron-carbonate, and sericite.

What are the dominant sulfides associated with gold at the Ladner Gold Project?

The dominant sulfides associated with gold at the Ladner Gold Project are pyrite>arsenopyrite>pyrrhotite, with an average of less than 2% in observed veins and greater than 15% in massive sulfide zones.