Automotive-Compliant, Hall Effect ICs from Diodes Incorporated Offer Wide Choice of Switching Sensitivities for Optimal Proximity Detection

Rhea-AI Summary

Diodes Incorporated (Nasdaq: DIOD) has introduced two new families of automotive-compliant Hall effect switch ICs: the AH332xQ (unipolar) and AH352xQ (omnipolar). These high-voltage ICs offer a wide range of operating sensitivity options for contactless position and proximity detection in automotive applications. The AH332xQ provides ten sensitivity options from 30G to 275G BOP, while the AH352xQ offers three high-sensitivity options from ±20G to ±40G BOP.

Key features include:

• Wide 3.0V to 28V supply voltage range
• -40°C to +150°C temperature range
• Open-drain output
• Enhanced robustness with reverse blocking diodes and Zener clamps
• ESD protection exceeding 8kV HBM and 1kV CDM
• 40V load-dump capability

The ICs are priced at $0.30 in 3,000-piece quantities.

Positive

• Introduction of new automotive-compliant Hall effect switch IC families
• Wide range of operating sensitivity options for various automotive applications
• Broad operating voltage range (3.0V to 28V) and temperature range (-40°C to +150°C)
• Enhanced robustness and reliability features
• Competitive pricing at $0.30 in 3,000-piece quantities

Negative

• None.

Insights

Tech Expert

Diodes Inc.'s new AH332xQ and AH352xQ Hall effect switch ICs represent a significant advancement in automotive proximity sensing technology. The wide range of switching sensitivities (from 30G to 275G for unipolar and ±20G to ±40G for omnipolar) allows for precise calibration in various automotive applications. This flexibility is important for optimizing sensor placement and performance in tight spaces.

The wide operating voltage range (3.0V to 28V) and temperature range (-40°C to +150°C) are particularly noteworthy, as they ensure reliability in harsh automotive environments. The inclusion of protective features like reverse blocking diodes, Zener clamps and ESD protection up to 8kV HBM demonstrates a robust design that meets stringent automotive requirements.

At $0.30 per unit in volume, these ICs offer a cost-effective solution for automakers looking to enhance safety and convenience features across their vehicle lineup. The availability of multiple package options further supports design flexibility and easy integration into existing automotive systems.

Market Research Analyst

The introduction of these automotive-compliant Hall effect ICs positions Diodes Inc. favorably in the growing market for advanced driver assistance systems (ADAS) and vehicle safety features. The global automotive sensor market is projected to reach $40 billion by 2026, with a CAGR of 6.5%. Hall effect sensors play a important role in this growth, particularly in applications like seatbelt detection and door latching.

Diodes Inc.'s competitive pricing at $0.30 per unit in volume orders could help the company capture a larger market share, especially among mid-range vehicle manufacturers looking to add premium safety features at a competitive price point. The wide range of sensitivity options also allows Diodes Inc. to cater to various automotive design needs, potentially expanding their customer base within the industry.

Investors should note that while this product line enhancement is positive, its impact on Diodes Inc.'s overall financial performance may take time to materialize, as automotive design cycles are typically long.

PLANO, Texas--(BUSINESS WIRE)-- Diodes Incorporated (Diodes) (Nasdaq: DIOD) announces the addition of two enhanced high-voltage, Hall effect switch IC families to its automotive-compliant* product portfolio. The AH332xQ (unipolar) and AH352xQ (omnipolar) offer a wide range of operating sensitivity options in SIP-3, SOT23 (Type S), and SC59 packages. The devices can be used in a broad range of contactless position and proximity detection applications, including seatbelt fastening, door and trunk latching, windshield wipers, and steering-wheel locks.

The unipolar AH332xQ is activated when the magnetic flux density of correct polarity exceeds the defined operating threshold (B_OP), and switches off when the flux density falls below the release threshold (B_RP). Ten sensitivity options are available, ranging from a highly sensitive 30G B_OP to a low-sensitivity 275G B_OP version, allowing for a wide range of magnet and distance choices for optimal sensing.

The omnipolar AH352xQ is activated when the magnetic flux density of either a magnetic south or north pole exceeds the B_OP and turns off when the magnetic flux density falls below the B_RP. Three high-sensitivity options are available, ranging from ±20G to ±40G B_OP devices.

The B_OP and B_RP thresholds for both the AH332xQ and AH352xQ provide a tight operating window with sufficient hysteresis for reliable operation, while a low-temperature coefficient ensures the stability of the switching points.

The AH332xQ and AH352xQ Hall effect devices have an open-drain output and operate over a wide 3.0V to 28V supply voltage range and -40°C to +150°C temperature range, providing product design flexibility to meet the requirements of the harsh automotive environment. Even when physical stress is applied to the package, the devices maintain very accurate sensitivity levels. For enhanced robustness and reliability, the devices have reverse blocking diodes with Zener clamps on their supply pins, as well as overcurrent limits and Zener clamps on their open-drain output. ESD protection exceeds 8kV HBM and 1kV CDM, and the devices have a 40V load-dump capability.

The AH332xQ and AH352xQ are available at $0.30 in 3,000-piece quantities.

About Diodes Incorporated

Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor’s SmallCap 600 and Russell 3000 Index company, delivers high-quality semiconductor products to the world’s leading companies in the automotive, industrial, computing, consumer electronics, and communications markets. We leverage our expanded product portfolio of analog and discrete power solutions combined with leading-edge packaging technology to meet customers’ needs. Our broad range of application-specific products and solutions-focused sales, coupled with global operations including engineering, testing, manufacturing, and customer service, enable us to be a premier provider for high-volume, high-growth markets. For more information, visit www.diodes.com.

*Automotive-compliant - AEC qualified, manufactured in facilities certified to IATF 16949, supporting PPAP documents.

The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries.

All other trademarks are the property of their respective owners.

© 2024 Diodes Incorporated. All Rights Reserved.

View source version on businesswire.com: https://www.businesswire.com/news/home/20240910012657/en/

Gurmeet Dhaliwal

Director, Investor Relations & Corporate Marketing

Diodes Incorporated

+1 408-232-9003

Contact Us

Source: Diodes Incorporated (P)

FAQ

What are the new Hall effect switch IC families introduced by Diodes Incorporated (DIOD)?

Diodes Incorporated has introduced two new automotive-compliant Hall effect switch IC families: the AH332xQ (unipolar) and AH352xQ (omnipolar).

What are the main applications for Diodes Incorporated's (DIOD) new Hall effect switch ICs?

The new Hall effect switch ICs are designed for contactless position and proximity detection in automotive applications, including seatbelt fastening, door and trunk latching, windshield wipers, and steering-wheel locks.

What is the operating voltage range of Diodes Incorporated's (DIOD) new AH332xQ and AH352xQ Hall effect switch ICs?

The AH332xQ and AH352xQ Hall effect switch ICs operate over a wide 3.0V to 28V supply voltage range.

What is the price of Diodes Incorporated's (DIOD) new AH332xQ and AH352xQ Hall effect switch ICs?

The AH332xQ and AH352xQ Hall effect switch ICs are priced at $0.30 in 3,000-piece quantities.