Trigon Reports 13 Metre Trench Grading 2.7% Copper And 34.5 G/T Silver At Silver Hill In Morocco

Rhea-AI Summary

Trigon Metals announced promising trench assay results from its Silver Hill Project in Morocco, revealing 13 metres of 2.7% copper and 34.5 g/t silver. This trench, located 1.5 km from the S1 discovery hole, indicates significant mineralization potential. Historical mining at the site suggests that high-grade silver may remain untouched at depth. Trigon plans to investigate further to ascertain the continuity of the mineral structure. The project aligns with Trigon's strategy to expand its copper and silver assets in African regions, particularly Morocco and Namibia.

Positive

• Trench assay results show 13 metres of 2.7% copper and 34.5 g/t silver.
• Location of the trench indicates potential for significant mineralization close to the S1 discovery hole.
• Historical mining suggests that high-grade silver may remain at depth, providing exploration opportunities.
• Company plans to target deeper structures for further exploration.

Negative

• None.

Trigon REports 13 metre Trench grading 2.7% copper and 34.5 g/t Silver at Silver hill in Morocco

TORONTO, ON / ACCESSWIRE / February 24, 2021 / Trigon Metals Inc. (TSX-V:TM) ("Trigon" or the "Company") announced today trench assay results from the Company's exploration program campaign at the Company's 100% owned Silver Hill Project ("Silver Hill" or the "Project") in Morocco.

A trench has been completed on fresh rock below the saprolite. Continuous samples were collected horizontally along the wall of the trench returning 13 metres of 2.7% copper, 34.5 g/t silver and 82 ppm cobalt. The trench exposed an area of intense sub-vertical hydrothermal alteration, giving geologists a unique look at the nature of the mineralization. The trench is located 1.5km away from the S1 discovery hole, in an area first identified by surface grab sample, J10 reported 6.8% copper and 116 g/t silver (see press release October 5, 2020). The zone was tested successfully with drill hole S9, 31 metres of 0.7% copper from 37 to 68 metres depth down the hole. Given the much higher grades in the trench, it now appears the original hole may not have penetrated the heart of the structure.

Continuous Samples from Trench

Sample #	From (m)	To (m)	Ag (g/t)	Cu (%)	Co (ppm)
E1	-	0.5	4	2.2	80
E2	0.5	1.0	4	0.66	16
E3	1.0	1.5	4	1.88	16
E4	1.5	2.0	4	1.19	28
E5	2.0	2.5	28	1.95	116
E6	2.5	3.0	68	3.74	48
E7	3.0	3.5	64	2.92	36
E8	3.5	4.0	88	3.82	64
E9	4.0	4.5	108	3.94	104
E10	4.5	5.0	52	3.55	60
E11	5.0	5.5	52	3.43	76
E12	5.5	6.0	32	3.59	248
E13	6.0	6.5	32	4.11	380
E14	6.5	7.0	32	3.88	236
E15	7.0	7.5	28	3.43	252
E16	7.5	8.0	28	3.56	72
E17	8.0	8.5	104	3.93	84
E18	8.5	9.0	24	3.54	32
E19	9.0	9.5	40	2.76	24
E20	9.5	10.0	36	2.46	40
E21	10.0	10.5	20	1.73	16
E22	10.5	11.0	8	1.09	8
E23	11.0	11.5	8	1.98	12
E24	11.5	12.0	16	2.64	32
E25	12.0	12.5	8	1.26	32
E26	12.5	13.0	4	1.06	12

The trench exposed some old mining works where the richest silver mineralization appears to have been previously mined out. Given the limitations of ancient mining techniques, it is our view that the core of the structure at depth has not yet been investigated. Samples E14 and E15 are taken from the opposing wall of the trench avoiding the muddy fill from the mined-out area. Evidence around the site continues to point to silver being the focus of the ancient miners, suggesting the mined-out material may have been a high grade silver vein. Company geologists plan to target deeper in the structure where the vein may remain untouched, out of reach of ancient mining technology.

The trench was 30m in total length ramping down to the target area and samples were taken some 5 metres below the surface level. It was all free digging material, completed with a diesel hydraulic shovel, at a width of 3.8 metres. A rock breaker was used for the final 1.5 metres.

Diagram of Eastern Sector Trench at Hole S9

Jed Richardson, President and CEO of Trigon Metals, said, "This trench, at the site of the S9 Drill hole, has given us our best view of the nature of the mineralization and provides insight for our next steps. We will step out and test the structure at depth to explore whether this structure is a continuation of what we see in the area of the discovery hole S1 over 2km of strike length, or if this is a separate but related structure. This early result supports our excitement about the project and about the prospectivity of Morocco, along with Namibia, our other preferred jurisdiction for developing significant new copper projects."

View of trench at end of first tier

Qualified Person

The technical information presented in this press release has been reviewed and approved for disclosure by Fanie Müller, P.Eng, VP Operations of Trigon, who is a Qualified Person as defined by NI 43-101.

Trigon Metals Inc.

Trigon is a publicly traded Canadian exploration and development company with its core business focused on copper and silver holdings in mine-friendly African jurisdictions. Currently the company has operations in Namibia and Morocco. Namibia is one of the world's most prospective copper regions, where Trigon has substantial assets in place. The Company holds an 80% interest in five mining licences in the Otavi Mountainlands, an area of Namibia widely recognized for its high-grade copper deposits, where the Company is focused on exploration and re-development of the previously producing Kombat mine. The Company also recently finalized the acquisition of the Silver Hill project, a highly prospective copper and silver exploration project in Morocco.

Cautionary Notes

This news release may contain forward-looking statements. These statements include statements regarding the Company's planned exploration program, the Company's strategies and the Company's abilities to execute such strategies, the Company's expectations for the Silver Hill Project, the prospectivity of the Silver Hill Project, the mineralization of the Silver Hill Project, and the Company's future plans and objectives. These statements are based on current expectations and assumptions that are subject to risks and uncertainties. Actual results could differ materially because of factors discussed in the management discussion and analysis section of our interim and most recent annual financial statements or other reports and filings with the TSX Venture Exchange and applicable Canadian securities regulations. We do not assume any obligation to update any forward-looking statements, except as required by applicable laws.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

For further information, contact:

Jed Richardson
+1 416 566 8134
Send Email
Website: www.trigonmetals.com

SOURCE: Trigon Metals, Inc.

View source version on accesswire.com:
https://www.accesswire.com/631280/Trigon-Reports-13-Metre-Trench-Grading-27-Copper-And-345-GT-Silver-At-Silver-Hill-In-Morocco

FAQ

What are the trench assay results from Trigon Metals' Silver Hill Project?

The trench assay results show 13 metres grading 2.7% copper and 34.5 g/t silver.

What does the trench assay indicate about the mineralization at Silver Hill?

The trench assay suggests significant mineralization potential, indicating that the original drill hole may not have penetrated the heart of the structure.

Where is the Silver Hill Project located?

The Silver Hill Project is located in Morocco, approximately 1.5 km from the S1 discovery hole.

What future exploration plans does Trigon Metals have for Silver Hill?

Trigon plans to investigate deeper structures at Silver Hill to explore mineralization continuity.

How does Trigon's activity at Silver Hill complement its operations in Namibia?

Trigon is focused on developing copper and silver assets in mine-friendly jurisdictions, including Morocco and Namibia, enhancing its growth potential.