Keysight Technologies to Highlight Solutions that Accelerate Digital Designs at DesignCon 2022
Keysight Technologies (NYSE: KEYS) will exhibit at DesignCon 2022 from April 5-7 at the Santa Clara Convention Center. The company showcases innovations in high-speed digital testing, aiding customers in overcoming challenges in product development. Key offerings include new solutions for PCIe and 224G interfaces, alongside tools for DDR5 memory validation and signal integrity analysis. Keysight emphasizes accelerating time-to-market and optimizing performance in consumer electronics and data center technologies. The event serves as a platform for discussions on digital design challenges.
- Introduction of innovative testing solutions such as PCIe 6.0/5.0 Tx and Rx tests.
- Launch of PathWave Design Software, enhancing memory design cycles and signal integrity.
- Participation in DesignCon 2022 highlights commitment to industry leadership.
- None.
What: High-speed digital standards are rapidly evolving to keep pace with emerging technologies, and each generational change introduces new test challenges. Customers need to test high-speed digital designs across all product development stages - from design and simulation, to analysis, debug and compliance test. |
||
Keysight is a gold exhibitor at DesignCon 2022 and is committed to working with customers to anticipate test challenges, optimize performance and accelerate time-to-market of high-speed computing interfaces, data center connections and consumer electronics. |
||
When: |
|
|
Where: |
|
|
Additional Information: |
Keysight at DesignCon 2022 or if unable to attend in person, register and Keysight will be live from DesignCon on |
|
Media Activities: |
Contact |
|
On display at the Keysight booth #1039 will be:
PathWave Design Software
- Memory Designer: PathWave ADS Memory Designer enables two new innovations to speed development cycles in next-generation memory designs: support for NAND Flash to find all key next-generation memory technologies in one platform and CA (Command/Address) Data Bus Pre-Layout Builder to easily explore different signal bus design choices in an intuitive tool to generate parameterized pre-layout representations of complex memory systems.
High-Speed Computing Interface
- PCI Express® (PCIe) 6.0/5.0 Tx Test: A new PCIe transmitter test solution designed to assist with increases in digital transmission speed and throughput, which introduces significant challenges with signal integrity, connector crosstalk, receiver jitter sensitivity, and overall channel insertion loss.
- PCIe 6.0/5.0 Rx Test: Designed to validate a robust receiver to tolerate significantly attenuated signals up to 64 GT/s with PCIe 6.0. Aggressive equalization techniques help the receiver restore the quality of the transmitted signal, allowing for recovery of the digital information from the PCIe signal.
Data Center Connectivity
- 224G Rx Test: 1.6T receiver test solution characterizing 224 Gbps interfaces offering customers high bandwidth and signal integrity.
- 224G Tx Test: Automated test system for 224G physical layer (PHY) validation, spotlighting signal to noise and distortion ratio (SNDR) and jitter measurements.
-
112G Forward Error Correction (FEC) and Impairment: Compliance test solution designed to integrate
FEC constraints into physical design validation for 800GBASE devices and components.
Consumer Electronics
- USB4 & DisplayPort 2.0: Utilizing USB4 and DisplayPort (DP) expertise, demonstrating solutions for USB4 and DP2.0 over a lossy, low-cost, passive cable.
Signal Integrity
- Signal Integrity Analysis: Demonstrating insight into the transmission of digital data from the transmitter, through the channel interconnects, to the receiver. This addresses hyperscale data center network topologies, which demand extreme bandwidth over the 800G physical layer interconnect components including backplanes, line cards, Ethernet cables and connectors.
DDR5 Memory Validation
- DDR5 Simulation & Test: Spotlighting new measurement science performing DDR5 compliance on a simulated waveform for fast repeatable test and a data repository for quick result analysis and decision making.
Keysight technology experts are hosting several workshops, panels and papers where attendees will learn about key topics and challenges associated with digital design.
PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or service marks of PCI-SIG.
About
Keysight delivers advanced design and validation solutions that help accelerate innovation to connect and secure the world. Keysight’s dedication to speed and precision extends to software-driven insights and analytics that bring tomorrow’s technology products to market faster across the development lifecycle, in design simulation, prototype validation, automated software testing, manufacturing analysis, and network performance optimization and visibility in enterprise, service provider and cloud environments. Our customers span the worldwide communications and industrial ecosystems, aerospace and defense, automotive, energy, semiconductor, and general electronics markets. Keysight generated revenues of
Additional information about
View source version on businesswire.com: https://www.businesswire.com/news/home/20220330005631/en/
+1 303 662 4748
geri_lacombe@keysight.com
+81 42 660-2162
fusako_dohi@keysight.com
Source:
FAQ
What is Keysight Technologies showcasing at DesignCon 2022?
When is DesignCon 2022?
Where is Keysight exhibiting at DesignCon 2022?
What are the key products displayed by Keysight at DesignCon 2022?
How does Keysight support high-speed digital designs?
