Keysight Expands Signal Source Analyzer Portfolio for Wireless, Radar, and High-Speed Digital Applications
- Expansion of the SSA-X Signal Source Analyzer portfolio with three new higher frequency models
- Integrated, one-box solution with best-in-class phase noise sensitivity
- Precision clock jitter analysis for advanced high-speed digital communication applications
- Enhanced application software for quick, multiple measurements
- None.
Insights
The introduction of Keysight Technologies' new higher frequency models of the SSA-X Signal Source Analyzer series represents a strategic move to address the evolving needs of the radio frequency (RF) engineering sector. As wireless communication, radar and high-speed digital applications push towards higher frequencies and data rates, the demand for precise testing equipment that can handle these advancements grows. Keysight's one-box solution simplifies the complex setups previously required for phase noise and jitter analysis, which could lead to increased efficiency for RF engineers. This efficiency may translate into reduced time-to-market for new technologies, potentially giving Keysight a competitive edge in the test and measurement industry.
From a market perspective, the integration of a two-port vector network analyzer (VNA) as an optional feature is a noteworthy addition. It eliminates the need for separate equipment purchases, which could be financially advantageous for customers and may increase the adoption rate of the SSA-X series. The enhanced phase noise sensitivity and precision clock jitter analysis capabilities are significant selling points that cater to the high standards required in advanced applications, such as 5G development and aerospace defense systems.
Keysight Technologies' expansion of the SSA-X series aligns with the company's growth strategy within the high-frequency domain, an area experiencing significant technological advancements. By offering a range of models up to 54 GHz, Keysight is positioning itself to capitalize on the increasing market demand for high-performance RF testing equipment. This expansion could lead to revenue growth as Keysight captures a larger market share in the high-frequency testing segment.
Investors should note the potential for increased sales volume due to the SSA-X series' ability to address a broader range of frequencies and its appeal to customers looking for integrated solutions. The financial performance of Keysight may be positively impacted if the SSA-X series is adopted as an industry standard for phase noise and signal source analysis. However, investors should also monitor the capital expenditures and research and development costs associated with the development of these high-tech models to assess their impact on the company's profitability.
The technical advancements in Keysight's SSA-X series, particularly the best-in-class phase noise sensitivity and the ability to perform millimeter-wave phase noise measurements at frequencies higher than 54 GHz, are critical for RF engineers working on next-generation wireless systems. The direct digital synthesis (DDS) source and proprietary cross-correlation channels enable cleaner signal generation and more accurate noise measurements, which are essential for characterizing devices like synthesizers and oscillators used in high-speed data transmission.
The inclusion of a two-port VNA option and the ability to perform a wide range of measurements, such as transient and spectrum analysis, in a single platform simplifies the workflow for engineers. This not only improves the efficiency of the testing process but also enhances the reliability of the measurements, which is paramount for the development of systems that require extremely low phase noise, such as satellite communications and advanced radar systems.
- One-box phase noise and signal source analysis solution extends to 26.5 / 44 / 54 GHz and higher frequencies with best-in-class phase noise sensitivity
- Integrated platform with optional two-port vector network analyzer supports evaluations for both one-port and two-port devices
- Clock jitter analysis software provides easy, in-depth jitter analysis for current and advanced high-speed digital applications
Keysight introduces an expansion to its SSA-X Signal Source Analyzer portfolio with three new higher frequency models – 26.5 GHz, 44 GHz, and 54 GHz – to give radio frequency engineers integrated, one-box phase noise and signal source analysis solutions for advanced wireless communications, radar, and high-speed digital applications. (Photo: Business Wire)
Evolving technologies and new, advanced standards demand more precise and cleaner signal sources with the lowest possible phase noise and jitter to support higher frequencies and data bandwidths and rates. However, testing and evaluating the phase noise and jitter of the signal sources for these applications often requires a very complex setup with multiple instruments, which consumes a lot of time. RF engineers also need to make other measurements such as frequency and power transient measurements as well as spectrum analysis to fully characterize signal sources such as synthesizers, clocks, and oscillators. In addition, engineers may need to measure the residual phase noise of active devices used in signal and data transmission paths.
The new higher frequency models of the Keysight SSA-X Signal Source Analyzer series address these challenges in these advanced applications with an all-in-one platform that includes a very clean signal enabled through a direct digital synthesis (DDS) source and proprietary cross-correlation channels.
The new Keysight SSA-X series of signal source analyzers provide the following benefits:
- Integrated, one-box solution – Provides comprehensive signal source analysis including phase noise measurement, residual noise measurement, transient measurement, spectrum analysis, network analysis, and voltage controlled oscillators (VCO) characterization in a single box. The built-in, clean signal source operating at up to 54 GHz and two RF inputs enable residual noise measurements without additional equipment and re-configuration. Two pairs of local oscillator (LO) output and intermediate frequency (IF) input ports and Keysight’s new E5051AW phase noise measurement downconverter/phase detector enable millimeter-wave phase noise measurements at higher than 54 GHz. A 2-port vector network analyzer (VNA) can be incorporated as an option to eliminate the need to purchase a standalone VNA.
- Best-in-class phase noise sensitivity – Provides accurate absolute and residual phase noise measurements with using extremely-low-phase-noise internal LOs and RF source.
- Easy-to-use, with flexible software – Enables quick, multiple measurements with a single connection and an easy-to-use interface. Application software has been enhanced to address more measurement needs, including spectrum analyzer and precision clock jitter analysis.
-
Precision clock jitter analysis – Offers accurate random jitter (RJ) and periodic jitter (PJ) measurements in the time and frequency domain. SSA-X can measure jitter with
20% higher sensitivity than the SSA and has the sensitivity of 2 femto seconds at 10 GHz for advanced high-speed digital communication applications.
Joe Rickert, Vice President and General Manager, Keysight High Frequency Measurements Center of Excellence, said: “The SSA-X series of signal source analyzers provides RF engineers an integrated, one-box solution that provides phase noise and jitter measurement solutions for advanced communications and high-speed digital applications. With the addition of three new models covering frequencies up to 54 GHz, the SSA-X series enables more accurate and higher quality evaluations that accelerate time-to-market of cutting edge technologies.”
Resources
- Keysight E5056A SSA-X
- Keysight E5057A SSA-X
- Keysight E5058A SSA-X
- Keysight E5055A SSA-X
- Keysight phase noise solution
About Keysight Technologies
At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we’re delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product lifecycle. We’re a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com.
View source version on businesswire.com: https://www.businesswire.com/news/home/20240130454933/en/
Keysight Media Contacts
Paul Erwin
+1 248 430 9075
paul.erwin@keysight.com
Fusako Dohi
+81 42 660-2162
fusako_dohi@keysight.com
Jenny Gallacher
+44 (0) 7800 737 982
jenny.gallacher@keysight.com
Source: Keysight Technologies, Inc.
FAQ
What are the new higher frequency models introduced by Keysight Technologies, Inc.?
What benefits do the new Keysight SSA-X series of signal source analyzers provide?
Who is the Vice President and General Manager of Keysight High Frequency Measurements Center of Excellence?
What does the SSA-X series of signal source analyzers enable for RF engineers?
