STOCK TITAN

Kodiak Extends High-Grade Adit Zone, Intersects 0.45% CuEq Over 139 m Near Surface

Rhea-AI Impact
(Neutral)
Rhea-AI Sentiment
(Neutral)
Tags

Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) has reported drill results from its 2024 program at the MPD copper-gold porphyry project in British Columbia. The company has extended the high-grade Adit Zone, intersecting 0.45% CuEq over 139 m near surface. Key highlights include:

- Drill hole AXE-24-009 intersected 0.31% CuEq over 327 metres, including 0.45% CuEq over 139 metres
- Drill hole AXE-24-011 intersected 0.20% CuEq over 450 metres, including 0.26% CuEq over 293 metres
- The Adit Zone has been extended to over 400 metres of strike length and remains open in several directions
- All mineralization drilled at Adit is within 350 metres of surface

The company has completed 9,252 metres of drilling in 25 holes across seven targets in 2024. Results from the remaining drilling will be reported throughout Q4 2024 and Q1 2025.

Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) ha riportato i risultati delle perforazioni del programma 2024 presso il progetto porfirico rame-oro MPD in Columbia Britannica. L'azienda ha esteso la Zona Adit ad alta legge, intersecando 0.45% CuEq su 139 m vicino alla superficie. I punti salienti includono:

- Il foro di perforazione AXE-24-009 ha intersecato 0.31% CuEq su 327 metri, inclusi 0.45% CuEq su 139 metri
- Il foro di perforazione AXE-24-011 ha intersecato 0.20% CuEq su 450 metri, inclusi 0.26% CuEq su 293 metri
- La Zona Adit è stata estesa a oltre 400 metri di lunghezza del fronte ed è ancora aperta in diverse direzioni
- Tutta la mineralizzazione perforata nella Zona Adit si trova entro 350 metri dalla superficie

L'azienda ha completato 9.252 metri di perforazione in 25 fori su sette obiettivi nel 2024. I risultati delle perforazioni rimanenti saranno riportati nel Q4 2024 e nel Q1 2025.

Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) ha informado los resultados de perforación de su programa 2024 en el proyecto de pórfido de cobre-oro MPD en Columbia Británica. La empresa ha ampliado la Zona Adit de alta ley, intersectando 0.45% CuEq sobre 139 m cerca de la superficie. Los aspectos destacados incluyen:

- El pozo de perforación AXE-24-009 intersectó 0.31% CuEq sobre 327 metros, incluyendo 0.45% CuEq sobre 139 metros
- El pozo de perforación AXE-24-011 intersectó 0.20% CuEq sobre 450 metros, incluyendo 0.26% CuEq sobre 293 metros
- La Zona Adit ha sido ampliada a más de 400 metros de longitud de strike y sigue abierta en varias direcciones
- Toda la mineralización perforada en la Zona Adit está dentro de los 350 metros de la superficie

La empresa ha completado 9,252 metros de perforación en 25 pozos en siete objetivos en 2024. Los resultados de la perforación restante se informarán durante el Q4 2024 y el Q1 2025.

코디악 구리 주식회사 (TSXV: KDK) (OTCQB: KDKCF)가 브리티시 컬럼비아의 MPD 구리-금 포개 프로젝트에서 2024년 프로그램의 드릴 결과를 보고했습니다. 회사는 고품질 Adit Zone을 확장하여 표면 근처에서 0.45% CuEq를 139m에서 교차했습니다. 주요 내용은 다음과 같습니다:

- 드릴 홀 AXE-24-009는 327미터에서 0.31% CuEq를 교차했으며, 여기에는 139미터에서 0.45% CuEq가 포함됩니다
- 드릴 홀 AXE-24-011은 450미터에서 0.20% CuEq를 교차했으며, 여기에는 293미터에서 0.26% CuEq가 포함됩니다
- Adit Zone은 400미터 이상의 스트라이크 길이로 확장되었으며 여러 방향으로 열려 있습니다
- Adit에서 드릴된 모든 광물화는 표면에서 350미터 이내에 있습니다

회사는 2024년 7개의 목표에서 25개의 드릴 홀에 대해 총 9,252미터의 드릴링을 완료하였습니다. 나머지 드릴링 결과는 2024년 4분기와 2025년 1분기에 걸쳐 보고될 예정입니다.

Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) a rapporté les résultats de forage de son programme 2024 sur le projet porphyre cuivre-or MPD en Colombie-Britannique. L'entreprise a étendu la zone Adit de haute teneur, intersectant 0.45% CuEq sur 139 m près de la surface. Les points forts incluent :

- Le trou de forage AXE-24-009 a intersecté 0.31% CuEq sur 327 mètres, y compris 0.45% CuEq sur 139 mètres
- Le trou de forage AXE-24-011 a intersecté 0.20% CuEq sur 450 mètres, y compris 0.26% CuEq sur 293 mètres
- La zone Adit a été étendue à plus de 400 mètres de longueur de frapper et reste ouverte dans plusieurs directions
- Toute la minéralisation forée dans la zone Adit se trouve à moins de 350 mètres de la surface

L'entreprise a complété 9 252 mètres de forage dans 25 trous sur sept cibles en 2024. Les résultats des forages restants seront rapportés tout au long du quatrième trimestre 2024 et du premier trimestre 2025.

Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) hat die Bohrergebnisse seines Programms 2024 im Kupfer-Gold-Porphyrprojekt MPD in British Columbia gemeldet. Das Unternehmen hat die hochgradige Adit-Zone erweitert und dabei 0.45% CuEq über 139 m nahe der Oberfläche durchschnitten. Zu den wichtigsten Highlights gehören:

- Die Bohrung AXE-24-009 hat 0.31% CuEq über 327 Meter durchschnitten, einschließlich 0.45% CuEq über 139 Meter
- Die Bohrung AXE-24-011 hat 0.20% CuEq über 450 Meter durchschnitten, einschließlich 0.26% CuEq über 293 Meter
- Die Adit-Zone wurde auf über 400 Meter Streichenlänge erweitert und bleibt in mehreren Richtungen offen
- Alle in Adit gebohrten Mineralisierungen befinden sich innerhalb von 350 Metern von der Oberfläche

Das Unternehmen hat 2024 insgesamt 9.252 Meter Bohrungen in 25 Löchern über sieben Ziele abgeschlossen. Die Ergebnisse der verbleibenden Bohrungen werden im 4. Quartal 2024 und im 1. Quartal 2025 veröffentlicht.

Positive
  • Extended high-grade Adit Zone with significant near-surface mineralization
  • Drill hole AXE-24-009 intersected 0.31% CuEq over 327 metres, including 0.45% CuEq over 139 metres
  • Drill hole AXE-24-011 intersected 0.20% CuEq over 450 metres, including 0.26% CuEq over 293 metres
  • Adit Zone extended to over 400 metres of strike length and remains open in several directions
  • All mineralization at Adit is within 350 metres of surface, indicating potential for open-pit mining
  • Completed 9,252 metres of drilling in 25 holes across seven targets in 2024
Negative
  • Results from the Celeste Zone drilling were not significant or did not warrant assaying at this time

Vancouver, British Columbia--(Newsfile Corp. - October 15, 2024) - Kodiak Copper Corp. (TSXV: KDK) (OTCQB: KDKCF) (FSE: 5DD1) (the "Company" or "Kodiak") today reports drill results from the 2024 drill program at its 100% owned MPD copper-gold porphyry project in southern British Columbia. Assay results from four drill holes at the Adit Zone and the Celeste target are presented herein.

Highlights - Adit Zone

  • Additional drilling at the Adit Zone continues to intersect broad higher-grade mineralization near surface and extend the copper-gold-silver (+/- molybdenum) porphyry system (Figures 1 and 2).

  • Drill holes AXE-24-009 and 011 extended mineralization an additional 200 metres below shallow historic drilling in the north and south, and to over 400 metres of strike length. The Adit Zone remains open in several directions (Figures 2 and 3).

  • All mineralization drilled by Kodiak at Adit to date is within 350 metres of surface due to the slope of the topography in the area (Figure 3).

  • Drill Hole AXE-24-009 intersected a broad interval of 0.26% Cu, 0.04 g/t Au, 3.57 g/t Ag (0.31% CuEq) over 327 metres from 21 to 348 metres, including 0.38% Cu, 0.05 g/t Au, 5.37 g/t Ag (0.45% CuEq) over 139 metres from 112 to 251 metres (Figures 2 to 4).

  • AXE-24-009 also contains several higher-grade intervals: 1.00% Cu, 0.02 g/t Au, 6.72 g/t Ag (1.06% CuEq) over 24 metres from 218 to 242 metres and 1.08% Cu, 0.04 g/t Au, 6.84 g/t Ag, (1.15% CuEq) over 15 metres from 287 to 302 metres.

  • Drill Hole AXE-24-011 intersected 0.17% Cu, 0.03 g/t Au, 1.42 g/t Ag (0.20% CuEq) over 450 metres from 63 to 513 metres, including 0.23% Cu, 0.04 g/t Au, 1.71 g/t Ag (0.26% CuEq) over 293 metres from 102 to 395 metres (Figures 2 to 4).

  • Similarly, AXE-24-011 also contains higher-grade intervals: 0.44% Cu, 0.03 g/t Au, 3.84 g/t Ag (0.48% CuEq) over 19 metres from 143 to 162 metres and 0.64% Cu, 0.01 g/t Au, 1.37 g/t Ag, (0.66% CuEq) over 18 metres from 345 to 363 metres.

  • Drilling at the Adit Zone targeted coincident copper-in-soil and 3D induced polarization (3D IP) chargeability anomalies that suggest it is part of a larger porphyry system (Figure 2). The current drilling is designed to extend Adit to depth and along strike. Additional drill holes have been completed with assays pending.

Claudia Tornquist, President and CEO of Kodiak said, "A key focus of Kodiak's 2024 drill program was to identify additional near-surface and high-grade mineralization, and drill results from the Adit Zone to date have clearly achieved this. The holes reported in this news release significantly extend the copper envelope at Adit and when combined with historic drilling, Kodiak's new results have outlined a sizeable near-surface, high-grade area of mineralization which bodes well for future economic potential. In addition to the Gate and West Zones, Adit is developing into a third substantial high-grade zone at MPD, marking an important advancement for the project. Adit remains open in multiple directions, and we are looking forward to further drill results from this zone as well as from other targets over the remainder of 2024 and into 2025."

Cannot view this image? Visit: https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_002.jpg

Figure 1: 2024 Significant Mineralized Zones and Target Location Map - MPD Project, Southern BC

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_002full.jpg

Cannot view this image? Visit: https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_003.jpg

Figure 2: Plan map showing significant mineralized zones with historic and Kodiak drilling to date. New 2024 holes at Adit and Celeste reported herein are yellow traces with assays. Bar graphs show downhole copper (green) and gold (red) values for the Kodiak drilling. Background is colour-contoured copper-in soil data.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_003full.jpg

Cannot view this image? Visit: https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_004.jpg

Figure 3: Adit Zone north-south long section at 678380mE (looking west into steep slope). Background is colour-contoured 3D IP Chargeability (SJV Geophysics, 2005). Results from hole AXE-24-009 and AXE-24-011 are in Table 1.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3803/226433_17ce3e387444c8ef_004full.jpg

Cannot view this image? Visit: https://images.newsfilecorp.com/files/3803/226433_figure4_550.jpg

Figure 4: Examples of core from 2024 drilling at the Adit Zone: a) Axe-24-009: Diorite with chalcopyrite-pyrite in quartz-carbonate veining replacing feldspar, in 24 m high-grade interval assaying 1.00% Cu, 0.02 g/t Au and 6.72 g/t Ag from 218 to 242; b) Axe-24-011: Bands of massive pyrite-chalcopyrite in strong quartz-sericite-pyrite altered section of monzodiorite at 301 m, within broad 293 m interval assaying 0.23% Cu, 0.04 g/t Au and 1.71 g/t Ag from 102 to 395 m.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3803/226433_figure4.jpg

Adit Zone Drilling

The Company's holes reported to date at the Adit Zone targeted broad, coincident 3D IP chargeability and copper-in-soil anomalies. The anomalies are located at the northern end of a geophysical-geochemical trend west of the Summers Creek fault that links the Adit, Mid and South Zones, and suggests these mineralized zones are part of a larger copper system (Figure 2).

Shallow historic drilling at the Adit Zone identified mineralization over 300 metres of strike within a broader alteration zone characterised by supergene leaching and shallow (< 200 metre) copper oxides. Kodiak's current drilling has intersected significant copper sulphide mineralization beyond the oxide zone and fault structures previously thought to limit mineralization.

Drill holes AXE-24-009 and AXE-24-011 were drilled from the same set-up as AXE-24-007 (see news release September 10, 2024), but to the southeast and northeast, respectively. The holes were designed to extend the strike of mineralization at Adit, test below historic percussion holes that rarely exceeded 100 metres depth, and target copper-in-soil / 3D IP anomalies. (Figure 3). Similar to AXE-24-007, holes AXE-24-009 and 011 have broad intervals (>300m) of Cu-Ag-Au (+/-Mo, Zn, Pb) mineralization with zones of higher grades noted in both oxide and sulphide facies.

Celeste Zone Drilling

The Celeste Target lies 600 metres north of the high-grade West Zone. Drilling evaluated a 700-metre-long copper-in-soil anomaly, anomalous prospecting samples from 2023, and a historic 3D-IP response.

Hole AXE-24-005 was drilled eastward across the copper-in-soil anomaly and encountered mostly volcanoclastic rocks with shallow but short intervals of skarn-type alteration. The hole ended in a strongly altered fault with trace mineralization from 234 metres to end of hole at 477 metres. Assays from hole AXE-24-005 were not significant. Hole AXE-24-006 was drilled southwest testing a high chargeability target from a second pad 600 metres east of AXE-24-005. This hole encountered mostly altered granodiorite with patchy pyrite and trace chalcopyrite but does not warrant assaying at this time.

Table 1: Weighted assay intervals for 2024 drill holes AXE-24-009 and AXE-24-011 (Adit Zone). See Figures 2 to 4.

Hole IDFrom
(m)
To
(m)
Interval** (m)%CuAu g/t Ag g/t %CuEq*
AXE-24-009213483270.260.043.570.31
includes1122511390.380.055.370.45
includes218242241.000.026.721.06
includes287302151.080.046.841.15
AXE-24-011635134500.170.031.420.20
includes1023952930.230.041.710.26
includes102171690.310.102.460.38
includes143162190.440.033.840.48
and includes345363180.640.011.370.66

 

* Copper equivalent grades (%CuEq) are for comparative purposes only to express the combined abundance of copper, gold, and silver. Metallurgical work has not been done at the MPD Project and metal recoveries used in equivalency calculations are from comparable deposits and/or mines. Metallurgical recovery is assumed as 88% for copper, 67% for gold and 68% for silver. Metal prices used in calculations are: US$4.10/lb copper, US$2,200/oz gold, and US$26/oz silver, using the formula: CuEq % =Cu % + Au g/t x 0.5959 + Ag g/t x 0.0071

**Intervals are downhole drilled core intervals. Drilling data to date is insufficient to determine true width of mineralization.

Table 2: 2024 MPD Drill Collar Information

Hole IDEasting (UTM Z10)Northing (UTM Z10)Elevation (m)Azimuth (degrees)Dip (degrees)EOH (m)TargetReported
AXE-24-00967834655027901257130-61434Adit2024-10-15
AXE-24-0116783465502790125730-50541Adit2024-10-15
AXE-24-0056773605504221144590-50477Celeste*2024-10-15
AXE-24-00667795655041711387210-54381Celeste*2024-10-15

 

* Drill hole had no significant assays or did not warrant assaying at this time.

The drilling portion of exploration at MPD in 2024 is now completed, with 9,252 metres drilled in 25 holes which evaluated seven targets and/or zones. Results from the remainder of drilling in 2024 will be reported throughout Q4 2024 and Q1 2025. Regional exploration on the project is still ongoing and includes a 2,000-sample soil geochemistry program, 25-line kilometres of 3D IP surveying, and a review of core from the newly acquired Aspen Grove claims (see news release September 16, 2024).

MPD is a large land package (338 square kilometres) located near several operating mines in the southern Quesnel Terrane, British Columbia's primary copper-gold producing belt. The project is located between the towns of Merritt and Princeton, with year-round accessibility and excellent infrastructure nearby.

QA/QC Procedures

All core samples were sent to ALS Canada Ltd. (ALS) in North Vancouver, BC for preparation and analysis. ALS meets all requirements of International Standards ISO/IEC 17025:2005 and ISO 9001:2015 for analytical procedures. HQ and NQ size core was split and sampled over approximately 1.5 to 3.0 metre intervals depending on core size. Samples were analyzed using ALS's Fire Assay Fusion method (Au-AA24) with an AA finish for gold and by a 48-element four acid digest ICP-AES analysis (MS61) with additional analysis for Ore Grade Elements (ME-OG62) and Ore Grade Cu (Cu-OG62). Results were reported in parts per million (ppm) and converted to percent (%), or grams per tonne (g/t) when applicable. In addition to ALS Laboratory quality assurance- quality control (QA/QC) protocols, Kodiak implements an internal QA/QC program that includes the insertion of sample blanks, duplicates, and standards in the field.

Jeff Ward, P.Geo, Vice President Exploration and the Qualified Person as defined by National Instrument 43-101, has reviewed, and approved the technical information contained in this release. Kodiak believes historic results referenced herein to be from reliable sources using industry standards at the time. However, the Company has not independently verified, or cannot guarantee, the accuracy of this historic information.

On behalf of the Board of Directors

Kodiak Copper Corp.

Claudia Tornquist
President & CEO

For further information contact:
Nancy Curry, VP Corporate Development
ncurry@kodiakcoppercorp.com
+1 (604) 646-8362

About Kodiak Copper Corp.

Kodiak is focused on its 100% owned copper porphyry projects in Canada and the USA that have been historically drilled and present known mineral discoveries with the potential to hold large-scale deposits. The Company's most advanced asset is the MPD copper-gold porphyry project in the prolific Quesnel Terrane in south-central British Columbia, Canada, a mining district with producing mines and excellent infrastructure. MPD has all the hallmarks of a major, multi-centered porphyry district with the potential to become a world-class mine. Work to date has outlined ten substantial mineralized zones across the project, with large, high-grade zones at Gate, West and Adit. With known mineralized zones open to expansion and more target areas yet to be tested, Kodiak continues to systematically explore the project and build critical mass. The Company also holds the Mohave copper-molybdenum-silver porphyry project in Arizona, USA, near the world-class Bagdad mine.

Kodiak's founder and Chairman is Chris Taylor who is well-known for his gold discovery success with Great Bear Resources. Kodiak is also part of Discovery Group led by John Robins, one of the most successful mining entrepreneurs in Canada.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statement (Safe Harbor Statement): This press release contains forward looking statements within the meaning of applicable securities laws. The use of any of the words "anticipate", "plan", "continue", "expect", "estimate", "objective", "may", "will", "project", "should", "predict", "potential" and similar expressions are intended to identify forward looking statements. In particular, this press release contains forward looking statements concerning the Company's exploration plans. Although the Company believes that the expectations and assumptions on which the forward-looking statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the Company cannot give any assurance that they will prove correct. Since forward looking statements address future events and conditions, they involve inherent assumptions, risks and uncertainties. Actual results could differ materially from those currently anticipated due to a number of assumptions, factors and risks. These assumptions and risks include, but are not limited to, assumptions and risks associated with conditions in the equity financing markets, and assumptions and risks regarding receipt of regulatory and shareholder approvals.

Management has provided the above summary of risks and assumptions related to forward looking statements in this press release in order to provide readers with a more comprehensive perspective on the Company's future operations. The Company's actual results, performance or achievement could differ materially from those expressed in, or implied by, these forward-looking statements and, accordingly, no assurance can be given that any of the events anticipated by the forward-looking statements will transpire or occur, or if any of them do so, what benefits the Company will derive from them. These forward-looking statements are made as of the date of this press release, and, other than as required by applicable securities laws, the Company disclaims any intent or obligation to update publicly any forward-looking statements, whether as a result of new information, future events or results or otherwise.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/226433

FAQ

What were the key drill results from Kodiak Copper's MPD project in 2024?

Kodiak Copper's key drill results from the MPD project in 2024 include intersecting 0.45% CuEq over 139 m near surface at the Adit Zone. Drill hole AXE-24-009 intersected 0.31% CuEq over 327 metres, and AXE-24-011 intersected 0.20% CuEq over 450 metres.

How much has the Adit Zone been extended at Kodiak Copper's MPD project?

The Adit Zone at Kodiak Copper's MPD project has been extended to over 400 metres of strike length and remains open in several directions. All mineralization drilled at Adit is within 350 metres of surface.

What is the total drilling completed by Kodiak Copper (KDKCF) at MPD in 2024?

Kodiak Copper (KDKCF) completed 9,252 metres of drilling in 25 holes across seven targets at the MPD project in 2024.

When will Kodiak Copper (KDKCF) report the remaining 2024 drill results from MPD?

Kodiak Copper (KDKCF) will report the remaining 2024 drill results from the MPD project throughout Q4 2024 and Q1 2025.

KODIAK COPPER CORP

OTC:KDKCF

KDKCF Rankings

KDKCF Latest News

KDKCF Stock Data

22.29M
72.71M
4.1%
0.11%
Other Precious Metals & Mining
Basic Materials
Link
United States of America
Vancouver