STOCK TITAN

Great Bear Drills Wide Shallow Gold Intervals at LP Fault: 3.22 g/t Gold Over 63.60 m and 4.61 g/t Gold Over 39.80 m in Same Drill Hole

Rhea-AI Impact
(Neutral)
Rhea-AI Sentiment
(Neutral)
Tags
Rhea-AI Summary

Great Bear Resources Ltd. announced significant results from its $21 million exploration program at the Dixie Project in Ontario. Key highlights include drill hole BR-166, which intersected 3.76 g/t gold over 103.4 meters, and BR-180, which recorded a remarkable 88.70 g/t gold over 1.35 meters. The ongoing drilling on the LP Fault confirms high-grade gold potential across 500 meters deep and 5 kilometers of strike length, with 100% success in intersecting gold mineralization in 172 holes completed.

Positive
  • High-grade gold mineralization confirmed in drill holes BR-166 and BR-180.
  • Drilling success rate of 100% with all holes intersecting gold mineralization.
  • Significant average grades achieved, such as 3.76 g/t over 103.4 meters.
Negative
  • None.

VANCOUVER, BC, Sept. 28, 2020 /PRNewswire/ - Great Bear Resources Ltd. (the "Company" or "Great Bear") (TSXV: GBR) (OTCQX: GTBAF) today reported results from its ongoing fully funded $21 million exploration program at its 100% owned flagship Dixie Project, in the Red Lake district of Ontario.

Chris Taylor, President and CEO of Great Bear said, "These results again demonstrate the exceptional grade potential and predictability of the LP Fault's near surface bulk tonnage gold mineralization.  Notably, drill hole BR-166 intersected two wide zones of higher-grade gold mineralization, which combined averaged 3.76 g/t over a total of 103.4 metres at a vertical depth of 95 - 210 metres.  Additionally, the best interval drilled along the eastern portion of the LP Fault grid to date was intersected in drill hole BR-180, which assayed 88.70 g/t gold over 1.35 metres."

Dixie Project Highlights Include:

  • Drilling continues to define gold mineralization on 50 - 75 metre centres along 5 kilometres of strike length of the LP Fault, to a vertical depth of approximately 500 metres.  All (100%) of the 172 LP Fault drill holes completed to date have successfully intersected the structure and gold mineralization.
  • New results include 4.61 g/t gold over 39.80 metres and 3.22 g/t gold over 63.60 metres on section 20100 towards the middle of the LP Fault zone in drill hole BR-166.  These intervals occur from 117.20 to 157.00 metres and 221.60 to 285.20 metres downhole respectivelyHigh-grade sub intervals include a high strain zone which assayed 28.26 g/t gold over 5.10 metres, including a strongly mineralized core of 121.00 g/t gold over 1.00 metre, and a transposed vein zone which assayed 19.78 g/t gold over 8.90 metresTable 1.
  • Drilling on section 18850, located 1.25 kilometres to the southeast of BR-166 has intersected the best gold interval to date within the eastern kilometre of the Company's current grid drill program.  Drill hole BR-180 assayed 88.70 g/t gold over 1.35 metres.  Only 17 drill holes along 1.4 kilometres have been completed in this area to date, with drill fences spaced approximately 200 metres apart on average.
  • An updated plan map of LP Fault drill results is provided in Figure 1.  An updated long section is provided in Figure 2.  A cross section through the new intercept in BR-180 is provided in Figure 3.

Table 1: Current LP Fault drill results. Drill sections are arranged from southeast (top of Table) to northwest (bottom of Table).

Drill Hole


From (m)

To (m)

Width* (m)

Gold (g/t)

Section

BR-180


238.00

256.00

18.00

6.92

18850

including

238.00

239.35

1.35

88.70

and

342.80

343.80

1.00

12.50

BR-181


111.85

125.00

13.15

0.73

18850

including

122.70

125.00

2.30

2.68

and including

124.30

125.00

0.70

6.64

and

213.00

215.00

2.00

6.30

including

213.00

213.50

0.50

23.50

BR-158


341.65

354.00

12.35

2.43

20025

including

344.50

346.00

1.50

17.70

BR-166


117.20

157.00

39.80

4.61

20100

including

147.35

156.25

8.90

19.78

and including

147.35

149.35

2.00

30.68

and including

150.00

150.50

0.50

62.60

and including

153.00

156.25

3.25

23.82

and including

153.50

155.75

2.25

30.83

and

199.60

214.50

14.90

0.60

and

221.60

285.20

63.60

3.22

including

245.85

280.25

34.40

5.69

and including

252.00

270.20

18.20

9.79

and including

262.00

270.20

8.20

18.81

and including

265.10

270.20

5.10

28.26

and including

269.20

270.20

1.00

121.00

BR-165


173.50

224.50

51.00

1.87

20150

including

210.50

224.50

14.00

5.24

and including

222.70

223.70

1.00

46.52

and

229.30

234.40

5.10

1.39

and

337.90

339.90

2.00

1.15

and

372.55

375.00

2.45

1.23

BR-155


343.50

405.00

61.50

0.46

20200

 

 

including

369.10

390.00

20.90

0.77

and including

379.00

386.70

7.70

1.07

and

752.50

765.00

12.50

0.26

BR-161


417.00

468.10

51.10

0.72

20200

including

426.00

452.00

26.00

1.10

and including

446.00

448.50

2.50

4.99

BR-153


407.90

411.90

4.00

0.59

20350

and

429.75

437.60

7.85

0.30

and

483.20

490.20

7.00

0.45

and

622.50

624.00

1.50

1.74

and

673.10

681.80

8.70

0.38

BR-170


121.50

156.00

34.50

1.06

20800

including

136.30

146.50

10.20

2.20

and including

140.75

141.25

0.50

28.20

and

194.00

263.00

69.00

0.44

BR-171


61.00

118.60

57.60

0.40

20800

including

57.50

100.50

43.00

0.55

and including

84.00

96.75

12.75

1.00

*Widths are drill indicated core length, as insufficient drilling has been undertaken to determine true widths at this time.  Average grades are calculated with un-capped gold assays, as insufficient drilling has been completed to determine capping levels for higher grade gold intercepts.  Average widths are calculated using a 0.10 g/t gold cut-off grade with up to 3 m of internal dilution of zero grade. 

Updated drill collar locations, azimuths and dips, together with an updated complete assay table for the LP Fault drilling to-date will be posted to the Company's web site at www.greatbearresources.ca. Drill collar locations, azimuths and dips for the drill holes included in this release are provided in the table below:

Drill Hole

Easting

Northing

Elevation

Depth

Dip

Azimuth

BR-153

457328

5634347

358

867

-65

210

BR-155

457475

5634291

364

765

-54

206

BR-158

457668

5634215

363

792

-62

208

BR-161

457501

5634291

366

819

-61

208

BR-165

457448

5634077

354

540

-55

206

BR-166

457491

5634070

355

540

-60

205

BR-170

456828

5634290

357

768

-60

212

BR-171

456770

5634206

357

591

-60

207

BR-180

458670

5633607

359

387

-54

213

BR-181

458613

5633499

364

306

-55

212

Figure 1: Inclined plan view of drill results to date.

Figure 1: Inclined plan view of drill results to date. (CNW Group/Great Bear Resources Ltd.)

Figure 2: Updated long section of LP Fault to date, showing highlighted assay intervals from BR-166 to the right of the section (Top right: 19.78 g/t gold over 8.90 m.  Bottom right: 18.81 g/t gold over 8.20 m).

Figure 2: Updated long section of LP Fault to date, showing highlighted assay intervals from BR-166 to the right of the section (Top right: 19.78 g/t gold over 8.90 m.  Bottom right: 18.81 g/t gold over 8.20 m). (CNW Group/Great Bear Resources Ltd.)

Figure 3: Drill section 18850 showing near-surface mineralization in drill hole BR-181 and high-grade mineralization in drill hole BR-180 assaying 88.70 g/t gold over 1.35 metres.  Results are from the sparsely drilled eastern  1.4 kilometres of the current grid drill program.


Figure 3: Drill section 18850 showing near-surface mineralization in drill hole BR-181 and high-grade mineralization in drill hole BR-180 assaying 88.70 g/t gold over 1.35 metres.  Results are from the sparsely drilled eastern  1.4 kilometres of the current grid drill program. (CNW Group/Great Bear Resources Ltd.)

About the Dixie Project

The Dixie Project is 100% owned, comprised of 9,140 hectares of contiguous claims that extend over 22 kilometres, and is located approximately 25 kilometres southeast of the town of Red Lake, Ontario. The project is accessible year-round via a 15 minute drive on a paved highway which runs the length of the northern claim boundary and a network of well-maintained logging roads.

The Dixie Project hosts two principal styles of gold mineralization:

  • High-grade gold in quartz veins and silica-sulphide replacement zones (Dixie Limb, Hinge and Arrow zones). Hosted by mafic volcanic rocks and localized near regional-scale D2 fold axes.  These mineralization styles are also typical of the significant mined deposits of the Red Lake district.
  • High-grade disseminated gold with broad moderate to lower grade envelopes (LP Fault).  The LP Fault is a significant gold-hosting structure which has been seismically imaged to extend to 14 kilometres depth (Zeng and Calvert, 2006), and has been interpreted by Great Bear to have up to 18 kilometres of strike length on the Dixie property.  High-grade gold mineralization is controlled by structural and geological contacts, and moderate to lower-grade disseminated gold surrounds and flanks the high-grade intervals.  The dominant gold-hosting stratigraphy consists of felsic sediments and volcanic units.

About Great Bear

Great Bear Resources Ltd. is a well-financed gold exploration company managed by a team with a track record of success in mineral exploration.  Great Bear is focused in the prolific Red Lake gold district in northwest Ontario, where the company controls over 300 km2 of highly prospective tenure across 4 projects: the flagship Dixie Project  (100% owned), the Pakwash Property (earning a 100% interest), the Dedee Property (earning a 100% interest), and the Sobel Property (earning a 100% interest), all of which are accessible year-round through existing roads.

QA/QC and Core Sampling Protocols

Drill core is logged and sampled in a secure core storage facility located in Red Lake Ontario.  Core samples from the program are cut in half, using a diamond cutting saw, and are sent to Activation Laboratories in Ontario, an accredited mineral analysis laboratory, for analysis. All samples are analysed for gold using standard Fire Assay-AA techniques. Samples returning over 10.0 g/t gold are analysed utilizing standard Fire Assay-Gravimetric methods.  Pulps from approximately 5% of the gold mineralized samples are submitted for check analysis to a second lab.  Selected samples are also chosen for duplicate assay from the coarse reject of the original sample.  Selected samples with visible gold are also analyzed with a standard 1 kg metallic screen fire assay.  Certified gold reference standards, blanks and field duplicates are routinely inserted into the sample stream, as part of Great Bear's quality control/quality assurance program (QAQC).  No QAQC issues were noted with the results reported herein. 

Qualified Person and NI 43-101 Disclosure

Mr. R. Bob Singh, P.Geo, Director and VP Exploration, and Ms. Andrea Diakow P.Geo, Exploration Manager for Great Bear are the Qualified Persons as defined by National Instrument 43-101 responsible for the accuracy of technical information contained in this news release.

ON BEHALF OF THE BOARD

"Chris Taylor"                                  

Chris Taylor, President and CEO

Cautionary note regarding forward-looking statements

This release contains certain "forward looking statements" and certain "forward-looking information" as defined under applicable Canadian and U.S. securities laws. Forward-looking statements and information can generally be identified by the use of forward-looking terminology such as "may", "will", "should", "expect", "intend", "estimate", "anticipate", "believe", "continue", "plans" or similar terminology. The forward-looking information contained herein is provided for the purpose of assisting readers in understanding management's current expectations and plans relating to the future. Readers are cautioned that such information may not be appropriate for other purposes.

Forward-looking information are based on management of the parties' reasonable assumptions, estimates, expectations, analyses and opinions, which are based on such management's experience and perception of trends, current conditions and expected developments, and other factors that management believes are relevant and reasonable in the circumstances, but which may prove to be incorrect.

Great Bear undertakes no obligation to update forward-looking information except as required by applicable law. Such forward-looking information represents management's best judgment based on information currently available. No forward-looking statement can be guaranteed and actual future results may vary materially. Accordingly, readers are advised not to place undue reliance on forward-looking statements or information.

Cision View original content to download multimedia:http://www.prnewswire.com/news-releases/great-bear-drills-wide-shallow-gold-intervals-at-lp-fault-3-22-gt-gold-over-63-60-m-and-4-61-gt-gold-over-39-80-m-in-same-drill-hole-301138795.html

SOURCE Great Bear Resources Ltd.

FAQ

What are the recent gold results from Great Bear Resources (GTBAF)?

Great Bear Resources reported drill hole BR-166 intersecting 3.76 g/t gold over 103.4 meters and BR-180 with 88.70 g/t gold over 1.35 meters.

How successful is the drilling program at the Dixie Project (GTBAF)?

The drilling program has a 100% success rate with 172 holes completed, all intersecting gold mineralization.

What is the depth of gold mineralization in the ongoing exploration by Great Bear Resources (GTBAF)?

Gold mineralization has been defined up to a vertical depth of approximately 500 meters.

GTBAF

OTC:GTBAF

GTBAF Rankings

GTBAF Latest News

GTBAF Stock Data

55.72M
Precious Metals
Non-Energy Minerals
Link
CA
Vancouver