Founders Metals Intersects 8.0 Metres of 6.64 g/t Gold and Discovers New Shear Zone at Donut

Rhea-AI Summary

Founders Metals announced significant drill core assay results from its 2024 drill program at the Antino Gold Project, southeastern Suriname. The phase one drilling at the Donut Zone revealed a new shear zone, termed the West Donut Shear, intercepted in four holes over 150 meters of strike. Key intersections include 8.0 meters of 6.64 g/t gold and 4.5 meters of 3.27 g/t gold. The Donut Zone exhibits both high-grade and broader, lower-grade gold mineralization, with key intervals such as 19.0 meters of 1.02 g/t gold and 6.0 meters of 3.10 g/t gold. These results indicate substantial gold continuity and potential for further exploration.

Positive

• Discovery of new West Donut Shear zone with significant gold intersections.
• High-grade gold mineralization of 8.0 meters at 6.64 g/t gold.
• Broad, lower-grade mineralization intervals such as 19.0 meters of 1.02 g/t gold.
• Continued gold mineralization along the western and northwestern extents of the Donut Zone.
• Potential for further exploration as the zone remains open along strike.

Negative

• West Donut Shear zone not tested below a vertical depth of 40 meters.
• Some drill holes reported no significant assay (NSA) results, indicating variable mineralization.

Vancouver, British Columbia--(Newsfile Corp. - May 30, 2024) - Founders Metals Inc. (TSXV: FDR) (OTCQX: FDMIF) (FSE: 9DL0) ("Founders" or the "Company") announces drill core assay results from its fully-funded 2024 drill program at the Antino Gold Project in southeastern Suriname. This release reports the remaining eight drill holes from phase one of drilling at the Donut Zone ("Donut").

West Donut Shear Discovery

• New shear zone intercepted in four holes over >150 metres ("m") of strike including:
  • 4.5 m of 3.27 grams per tonne ("g/t") gold ("Au") from 15.6 m downhole (24DO04)
  • 12.0 m of 0.84 g/t Au from 12.6 m (24DO13)
  • 27.0 m of 0.73 g/t Au from 26.1 m (24DO14)
  • 16.5 m of 2.35 g/t Au from 26.1 m (Hole 24DO02, previously reported)

Main Donut Shear

• Along-strike continuity of previously reported high-grade gold at Donut with intervals including:
  • 8.0 m of 6.64 g/t Au from 247.0 m (Hole 24DO13)
  • 19.0 m of 1.02 g/t Au from 99.0 m (Hole 24DO09)
  • 6.0 m of 3.10 g/t Au from 181.0 m (Hole 24DO15)

The Donut Zone is located in the northwest section of the Antino Property, approximately 800 metres northeast of the Froyo Zone (Refer to Figure 1). Mineralization at Donut is characterized by broader, intrusion-hosted gold mineralization and structurally controlled high-grade gold mineralization.

Colin Padget, Founders CEO commented, "We are pleased to see the gold mineralization at Donut continue along strike with 8.0 metres of 6.64 g/t Au in hole 24DO13 and some broader, lower-grade intervals as expected. Additionally, we've hit a second gold-bearing shear hosted in the mixed volcanic rocks to the west of Donut with near surface gold mineralization over substantial widths. Combined, these results represent an excellent first phase of drilling at Donut and our team is busy with planning follow up work."

West Donut Shear Discovery

The newly identified West Donut Shear (Figure 2) is a steeply dipping zone of shear-hosted gold mineralization intercepted in four drill holes. The zone is intercepted near surface in all four holes. Drill holes 24DO04 (4.5 m of 3.27 g/t Au), 24DO13 (12.0 m of 0.84 g/t Au), 24DO14 (27.0 m of 0.73 g/t Au) and previously reported 24DO02 (16.5 m of 2.35 g/t Au) outline a north-south oriented shear zone with a minimum strike length of 150 m. The zone remains open along strike and has not been drill tested below a vertical depth of 40 m.

Intrusion-Hosted Donut Mineralization

Gold mineralization at Donut occurs within a main shear near the tonalite intrusive body's margin. Broader, up to 40 m, zones of lower-grade gold mineralization (0.1 - 1.5 g/t Au) also occur within the intrusive. The latest results including, 8.0 m of 6.64 g/t Au (24DO013), 6.0 m of 3.10 g/t Au (24D015) and 19.0 m of 1.02 g/t Au (24DO09) confirm the continuation of high-grade gold along the western and northwestern extents of the intrusive contact where shearing is most concentrated. Mineralization in this part of the Donut system remains open and currently extends over a strike length of at least 190 m along the western contact and >130 m along the northwestern margin. The eastern and southern intrusive margins also potentially host gold and will be further tested as part of the Company's future drilling plans.

Table 1: Drilling Results and Highlights at the Donut Zone

Hole ID	From (m)	To (m)	Core Length* (m)	Au (g/t)
24DO04	15.60	20.10	4.50	3.27
24DO05				NSA
24DO08				NSA
24DO09	53.00	60.00	7.00	0.81
and	99.00	118.00	19.00	1.02
and	184.00	195.00	11.00	0.92
24DO10	0.00	24.60	24.60	0.54
24DO11B	161.18	181.18	20.00	0.53
24DO12	73.10	80.60	7.50	0.68
and	255.00	264.30	9.30	0.56
24DO13	12.60	24.60	12.00	0.84
and	161.00	168.00	7.00	1.26
and	192.00	234.00	42.00	0.31
and	247.00	255.00	8.00	6.64
24DO14	0.00	6.60	6.60	0.53
and	26.10	53.10	27.00	0.73
24DO15	6.60	15.60	9.00	0.93
and	56.00	92.00	36.00	0.71
and	138.00	146.00	8.00	1.27
and	181.00	187.00	6.00	3.10
24DO16	24.60	31.00	6.40	0.44
and	83.00	90.00	7.00	0.63

 

*Intervals are estimated to represent 85% or more of true width based on current drill data

Figure 1: Upper Antino Plan Map with Historical Auger Samples

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7574/211099_founders_figure1.png

Figure 2: Upper Antino Plan Map Centred on the Donut Zone

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7574/211099_founders_figure2.png

Figure 3: Upper Antino Section Map Centred on the Donut Zone

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7574/211099_85f2c6d114971818_003full.jpg

About Founders Metals Inc.

Founders Metals is a Canadian exploration company with properties in North and South America. The Company focuses on acquiring and advancing gold projects in the Guiana Shield. Its flagship asset is the 20,000 ha Antino Gold Project in Suriname, where artisanal surface/alluvial mining has produced over 500,000 gold ounces to date¹. Using its diamond drilling equipment, the Company drilled over 10,000 metres in 2023 and is fully financed for drilling in 2024.

¹ 2022 Technical Report - Antino Project; Suriname, South America. K. Raffle, BSc, P. Geo & Rock Lefrançois, BSc, P.Geo.

Quality Assurance and Control

Results from samples were analyzed at FILAB Suriname, a Bureau Veritas Certified Laboratory in Paramaribo, Suriname (a commercial certified laboratory under ISO 9001:2015). Samples are crushed to 75% passing 2.35 mm screen, riffle split (700 g) and pulverized to 85% passing 88 µm. Samples were analyzed using a 50 g fire assay (50 g aliquot) with an Atomic Absorption (AA) finish. For samples that return assay values over 10.0 grams per tonne (g/t), another cut was taken from the original pulp and fire assayed with a gravimetric finish. Founders Metals inserts blanks and certified reference standards in the sample sequence for quality control. External QA-QC checks are performed at ALS Global Laboratories (Geochemistry Division) in Lima, Peru (an ISO/IEC 17025:2017 accredited facility). A secure chain of custody is maintained in transporting and storing of all samples. Drill intervals with visible gold are assayed using metallic screening. Rock chip samples from outcrop/bedrock are selective by nature and may not be representative of the mineralization hosted on the project.

Qualified Persons

The technical content of this news release has been reviewed and approved by Michael Dufresne, M.Sc., P.Geol., P.Geo., a qualified person as defined by National Instrument 43-101.

ON BEHALF OF THE BOARD OF DIRECTORS,

Per: "Colin Padget"

Colin Padget
President, Chief Executive Officer, and Director

Founders Metals Contact Information

Katie MacKenzie, Vice President, Corporate Development
Tel: 306 537 8903 | katiem@fdrmetals.com

Nick Stajduhar, Director
Tel: 647 225 0046 | nicks@fdrmetals.com

Cautionary Statement Regarding Forward-Looking Information

This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation. Forward-looking information includes, without limitation, statements regarding the use of proceeds from the Company's recently completed financings and the future or prospects of the Company. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect ", "is expected ", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking statements are necessarily based upon a number of assumptions that, while considered reasonable by management, are inherently subject to business, market, and economic risks, uncertainties, and contingencies that may cause actual results, performance, or achievements to be materially different from those expressed or implied by forward-looking statements. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, other factors may cause results not to be as anticipated, estimated, or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. Other factors which could materially affect such forward-looking information are described in the risk factors in the Company's most recent annual management discussion and analysis. The Company does not undertake to update any forward-looking information except in accordance with applicable securities laws.

All material information on Founders Metals can be found at www.sedarplus.ca.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/211099

FAQ

What are the latest drill results for FDMIF at the Donut Zone?

Founders Metals reported significant gold intersections including 8.0 meters of 6.64 g/t and 4.5 meters of 3.27 g/t gold from their 2024 drill program.

Where is the new gold-bearing shear zone discovered by FDMIF?

The new West Donut Shear zone, intercepted in four drill holes, is located at the northwest section of the Antino Property in southeastern Suriname.

What is the significance of the 8.0 meters at 6.64 g/t gold interception for FDMIF?

The 8.0 meters at 6.64 g/t gold interception indicates a high-grade gold mineralization at the Donut Zone, suggesting substantial gold continuity.

How do the new discoveries by FDMIF impact future exploration?

The discovery of the West Donut Shear zone and significant gold intersections indicate strong potential for further exploration as the zones remain open along strike.

What challenges were noted in the FDMIF drilling results at the Donut Zone?

The key challenge is that the West Donut Shear zone has not been tested below a vertical depth of 40 meters, and some drill holes reported no significant assay results.