Bayhorse Silver Commences Underground Drill Program

Rhea-AI Summary

Bayhorse Silver Inc. initiates underground drill program at its Bayhorse Silver Mine in Oregon, targeting high-grade silver mineralization. The company plans to confirm mineralization identified in previous drill results and explore new zones based on recent surveys. Potential for gold-rich deposits alongside silver mineralization is also highlighted, increasing the discovery potential. The CEO emphasizes the significance of low resistivity anomalies for further exploration. Historic gold grades and proximity to high-grade gold properties further enhance the exploration potential.

Vancouver, British Columbia--(Newsfile Corp. - March 13, 2024) - Bayhorse Silver Inc, (TSXV: BHS) (OTCQB: BHSIF) (FSE: 7KXN) (the "Company" or "Bayhorse") reports that it has commenced the first stage of its underground drill program at its Bayhorse Silver Mine in Baker County, Oregon, USA.

The first drill holes are to confirm the Big Dog hanging wall mineralization, where prior drill results has identified silver grades of 6.75 oz/t over 6 meters, (BHS22-08) and Grab samples taken from the Big Dog zone returned 218.2 oz/t (6,786.76 g/t) and 30.17 oz/t (938.4 g/t) silver respectively, while a Goldilocks sample returned 145.05 oz/t (4,511.5 g/t) silver. (BHS22-07)

The second stage of underground drilling will be to target a low resistivity zone identified from the recent VTEM survey, that starts immediately to the west of the western end of the current underground workings. ( Figure 1 - Proposed drill targets).

The known strike of the Big Dog hanging wall zone is 100 meters (330 feet) with a 12 meter (40 foot known vertical extent.

A surface drill program is currently in the permitting stage targeting the large low resistivity zone on the SE corner of the Bayhorse Idaho property, that appears to extend to the east, beyond the VTEM survey area. Drill target "1" and drill target "2'" are 600 meters (2,000 feet) apart, with the smaller low resistivity drill target 3, is a further 1,000 meters (3,300 feet) to north, to determine whether a copper porphyry exists on the Idaho property.

There are possibly two different mineralized targets on the newly acquired Idaho claims. A Bayhorse Mine style silver rich massive sulphide target related to the strong magnetic signatures and a possibly Hercules Silver-type copper porphyry target marked by the strong minimal Resistivity results.

Bayhorse CEO, Graeme O'Neill, comments that the low resistivity anomaly both immediately west and east of the Bayhorse Mine underground workings, makes it a priority for further drill testing. As well the low resistivity anomalies in the east of the Idaho property, may significantly increase the discovery potential of a copper porphyry deposit as found at Hercules Silver property, 44 km to the north in similar geological terrain.

Due to the historic reported gold grades of up to 10 g/t at the Bayhorse Mine, (Silver King Mines, 1984) and presence of high grade gold properties in close proximity to the Bayhorse Mine (Gleason, 8 km to the west, Connor Creek, 6 km to the north) the Company's senior geological consultants believe it possible that the silver-rich Bayhorse Mine epithermal mineralization may be underlain by a gold-rich zone.

Figure 1 Proposed drill targets

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5015/201535_bayhorse_figure1.png

Dr. Clay Conway, P.Geol., has mapped rhyolite-hosted mineralization east of the Snake River in the area underlain by the strong magnetic anomalies. This raises the possibility that another Bayhorse Silver rich deposit may be found at the hydrothermally altered rhyolite contacts.

Figure 2. Bayhorse underground and mapped Idaho mineralization

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5015/201535_2747604c44029ac8_002full.jpg

It has long been known there is a strong genetic and spatial relationship between porphyry plutons (which are the source of the hot fluids and metals) and outlying or overlying epithermals, skarns, mantos and even vein systems. If the metals stay in the pluton or close to its margins it may end up as a Cu porphyry. If in addition the fluids move upwards along conduits, then this could result in precious metal epithermal mineralization like the Bayhorse high grade silver deposit.

This News Release has been prepared on behalf of the Bayhorse Silver Inc. Board of Directors, which accepts full responsibility for its content. Mark Abrams, AIPG Certified Professional Geologist, a Qualified Person and Director of the Company has prepared, supervised the preparation of, and approved the technical content of this press release.

On Behalf of the Board.

Graeme O'Neill, CEO
866-399-6539

About Bayhorse Silver Inc.

Bayhorse Silver Inc. is an exploration and production company with a 100% interest in the historic Bayhorse Silver Mine located in Oregon, USA. With state of the art Steinert Ore-Sorting technology reducing waste rock entering the processing stream by up to 85%, we have created a minimum environmental impact facility capable of mining 200 tons of mineralization per day and the ability to process and supply 3,600 tons per year of silver/copper/antimony concentrate ranging between 7,500 to 15,000 g/t silver and 10-12% copper, 10-12% antimony, and 15-18% zinc using standard flotation processing at its milling facility in nearby Payette County, Idaho, USA, with an offtake agreement in place with Ocean Partners UK Limited. The Company also has an option to acquire an 80% interest in the Brandywine high grade silver/gold property located in B.C. Canada. The Company has an experienced management and technical team with extensive mining expertise in both exploration and building mines.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/201535

FAQ

What is Bayhorse Silver Inc. currently focusing on?

Bayhorse Silver Inc. has commenced an underground drill program at its Bayhorse Silver Mine in Oregon, targeting high-grade silver mineralization.

What are the significant findings from prior drill results at the Bayhorse Silver Mine?

Previous drill results identified silver grades of 6.75 oz/t over 6 meters, with grab samples returning high silver grades from the Big Dog zone.

What is the company's plan for the second stage of underground drilling?

The second stage of drilling aims to target a low resistivity zone identified from recent surveys, located to the west of the current underground workings.

What additional exploration programs are in progress at Bayhorse Silver Inc.?

A surface drill program is in the permitting stage to target a large low resistivity zone on the SE corner of the Bayhorse Idaho property, potentially indicating a copper porphyry deposit.

What is the CEO's perspective on the exploration potential of Bayhorse Silver Inc.?

The CEO highlights the significance of low resistivity anomalies for further exploration and believes in the potential for gold-rich deposits alongside silver mineralization.