Vishay Intertechnology Shielded IFDC and Semi-Shielded IFSC Series Ferrite Inductors Now Available in 2020DE, 3232DB, and 5050HZ Case Sizes
Vishay Intertechnology (NYSE: VSH) has expanded its shielded IFDC and semi-shielded IFSC series of wirewound, surface-mount ferrite inductors with three new devices in the 2020DE, 3232DB, and 5050HZ case sizes. These cost-effective inductors offer improved performance over previous-generation ferrite solutions, featuring:
- Higher inductance (up to 1 mH) and current ratings
- Lower DCR (40% reduction in some models)
- Saturation currents up to 14 A
- Operating temperatures up to +125 °C
- Operating voltages of 120 V
The new inductors are ideal for DC/DC conversion in consumer electronics, battery-powered devices, and noise suppression in power lines. Samples and production quantities are available now, with 10-12 week lead times.
Vishay Intertechnology (NYSE: VSH) ha ampliato la sua serie di induttori ferrite IFDC schermati e IFSC semi-scremati con tre nuovi dispositivi nelle dimensioni di caso 2020DE, 3232DB e 5050HZ. Questi induttori economici offrono prestazioni migliorate rispetto alle soluzioni in ferrite della generazione precedente, con:
- Induttanza superiore (fino a 1 mH) e valutazioni di corrente
- DCR inferiore (riduzione del 40% in alcuni modelli)
- Correnti di saturazione fino a 14 A
- Temperature di esercizio fino a +125 °C
- Tensioni di esercizio di 120 V
I nuovi induttori sono ideali per conversione DC/DC in elettronica di consumo, dispositivi alimentati a batteria e soppressione del rumore nelle linee di alimentazione. Sono disponibili campioni e quantità di produzione, con tempi di consegna di 10-12 settimane.
Vishay Intertechnology (NYSE: VSH) ha ampliado su serie de inductores ferrita IFDC blindados y IFSC semi-blindados con tres nuevos dispositivos en los tamaños de caso 2020DE, 3232DB y 5050HZ. Estos inductores rentables ofrecen un mejor rendimiento que las soluciones de ferrita de la generación anterior, con:
- Inductancia mayor (hasta 1 mH) y clasificaciones de corriente
- DCR más bajo (reducción del 40% en algunos modelos)
- Corrientes de saturación de hasta 14 A
- Temperaturas de operación de hasta +125 °C
- Voltajes de operación de 120 V
Los nuevos inductores son ideales para conversión DC/DC en electrónica de consumo, dispositivos alimentados por batería y supresión de ruido en líneas de energía. Las muestras y cantidades de producción están disponibles ahora, con tiempos de entrega de 10 a 12 semanas.
비샤이 인터테크놀로지(NYSE: VSH)는 차폐된 IFDC 및 반차폐된 IFSC 시리즈의 와이어 본딩 표면 장착 페라이트 인덕터를 2020DE, 3232DB 및 5050HZ 케이스 사이즈의 세 가지 새로운 장치로 확장했습니다. 이 비용 효율적인 인덕터는 이전 세대의 페라이트 솔루션보다 향상된 성능을 제공하며, 다음과 같은 특징이 있습니다:
- 더 높은 인덕턴스(최대 1 mH) 및 전류 등급
- 낮은 DCR(일부 모델에서 40% 감소)
- 최대 14 A의 포화 전류
- 최대 +125 °C의 동작 온도
- 120 V의 동작 전압
새로운 인덕터는 소비자 가전, 배터리 구동 장치 및 전원선의 노이즈 억제를 위한 DC/DC 변환에 이상적입니다. 샘플 및 생산 수량이 지금 제공되며, 리드 타임은 10-12주입니다.
Vishay Intertechnology (NYSE: VSH) a élargi sa série d'inducteurs ferrites IFDC blindés et IFSC semi-blindés avec trois nouveaux dispositifs dans les tailles de boîte 2020DE, 3232DB et 5050HZ. Ces inducteurs économiques offrent des performances améliorées par rapport aux solutions en ferrite de génération précédente, incluant :
- Une inductance plus élevée (jusqu'à 1 mH) et des évaluations de courant
- Une DCR plus faible (réduction de 40 % sur certains modèles)
- Des courants de saturation pouvant atteindre 14 A
- Des températures de fonctionnement allant jusqu'à +125 °C
- Des tensions de fonctionnement de 120 V
Les nouveaux inducteurs sont idéaux pour la conversion DC/DC dans l'électronique grand public, les appareils alimentés par batterie et l'atténuation du bruit dans les lignes électriques. Des échantillons et des quantités de production sont désormais disponibles, avec des délais de livraison de 10 à 12 semaines.
Vishay Intertechnology (NYSE: VSH) hat seine geschirmten IFDC und halbgeschirmten IFSC Serien von drahtgewickelten, oberflächenmontierten Ferrit-Induktivitäten mit drei neuen Geräten in den Gehäusegrößen 2020DE, 3232DB und 5050HZ erweitert. Diese kosteneffizienten Induktivitäten bieten eine verbesserte Leistung im Vergleich zu den Ferrit-Lösungen der vorherigen Generation und verfügen über:
- Höhere Induktivität (bis zu 1 mH) und Stromwerte
- Niedrigerer DCR (40% Reduzierung in einigen Modellen)
- Sättigungsströme von bis zu 14 A
- Betriebstemperaturen von bis zu +125 °C
- Betriebsspannungen von 120 V
Die neuen Induktivitäten sind ideal für DC/DC-Konversion in Unterhaltungselektronik, batteriebetriebenen Geräten und zur Geräuschunterdrückung in Stromleitungen. Muster und Produktionsmengen sind jetzt verfügbar, mit Lieferzeiten von 10-12 Wochen.
- Introduction of new cost-effective inductors with improved performance
- Higher inductance (up to 1 mH) and current ratings compared to previous-generation devices
- 40% lower DCR in IFSC-2020DE-01 and IFSC-3232DB-01 models
- Increased saturation currents up to 14 A in IFDC-5050HZ model
- Enhanced operating temperatures up to +125 °C and operating voltages of 120 V
- 60% smaller size while matching performance of previous-generation solutions
- 10-12 week lead times for production quantities
Vishay's new IFDC and IFSC inductors represent a significant advancement in passive component technology. The 60% size reduction while maintaining performance is important for the miniaturization trend in consumer electronics. The 40% lower DCR and higher saturation currents up to
The extended inductance range up to 1 mH opens new design possibilities, potentially reducing the need for multiple components. This, combined with the cost-effective manufacturing process, could lead to reduced BOM costs for OEMs. The 120 V operating voltage also expands application scope.
While this advancement strengthens Vishay's market position, the 10-12 week lead time might be a concern in the current supply-constrained environment. Overall, this product line extension should positively impact Vishay's competitive edge in the passive components market.
This product expansion is a positive development for Vishay (NYSE: VSH). The new inductors' improved performance and cost-effectiveness could drive increased adoption in high-volume markets like consumer electronics and computing. This may lead to revenue growth in Vishay's passive components segment.
The cost-effective manufacturing techniques mentioned suggest potential for improved profit margins. However, the impact on overall financials may be , as inductors are just one product line in Vishay's diverse portfolio.
Investors should monitor future earnings reports for signs of market share gains or margin improvements in the passive components segment. The 10-12 week lead time is worth watching, as extended lead times could impact revenue recognition timing.
While this news is incrementally positive, it's unlikely to be a major stock mover on its own. Long-term success will depend on Vishay's ability to continue innovating across its product lines.
Cost-Effective Wirewound Inductors Offer Saturation Currents to 14 A, Inductance to 1 mH, and 40 % Lower DCR Than Previous-Generation Devices
MALVERN, Pa. , Aug. 07, 2024 (GLOBE NEWSWIRE) -- Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it has extended its shielded IFDC and semi-shielded IFSC series of wirewound, surface-mount ferrite inductors with three new devices in the 2020DE, 3232DB, and 5050HZ case sizes. Offering improved performance at a lower cost than previous-generation ferrite solutions, the Vishay Dale inductors combine higher inductance and current ratings with lower DCR for computer and consumer applications.
The IFDC-5050HZ, IFSC-2020DE-01, and IFSC-3232DB-01 match the performance of previous-generation ferrite solutions — but with a 60 % smaller size — while offering enhanced performance compared to similar-sized devices, including higher operating temperatures to +125 °C and operating voltages of 120 V. Additionally, the IFSC-2020DE-01 and IFSC-3232DB-01 feature 40 % lower DCR, while the IFDC-5050HZ supports higher saturation currents up to 14 A.
While other high performance inductors typically offer a maximum inductance of 100 µH, the devices released today achieve significantly higher values of 470 µH for the IFSC-2020DE-01 and IFSC-3232DB-01 and 1 mH for the IFDC-5050HZ. Furthermore, by utilizing efficient manufacturing techniques and a simple bobbin style wirewound construction, IFSC and IFDC series inductors provide a more cost effective solution over IHLP inductor technology while still delivering high quality and reliability.
With the enhanced efficiency enabled by their low loss ferrite core construction and low DCR, the devices are ideal for use as energy storage inductors in a variety of DC/DC conversion topologies found in consumer electronics and battery-powered devices. Moreover, the IFSC and IFDC families make cost-effective solutions in differential LC filter topologies for noise suppression on power lines. Focus markets include consumer entertainment devices such as televisions, sound bars, and audio and gaming systems; general computing equipment such as desktops, monitors, and scanners; as well as other household appliances. In these applications, the IFDC-5050HZ — which features a coil enclosed in an exterior magnetic material that contains stray flux — minimizes EMI and crosstalk to nearby components.
Device Specification Table:
| Part number | IFSC-2020DE-01 | IFSC-3232DB-01 | IFDC-5050HZ |
| Shielding | Semi-shielded | Semi-shielded | Shielded |
| Size (mm) | 6.0 x 6.0 x 4.5 | 8.0 x 8.0 x 4.2 | 12.3 x 12.3 x 8.0 |
| Inductance (H) | 1 to 470 | 0.9 to 100 | 3.3 to 1000 |
| DCR typ. (m) | 14 to 2000 | 6 to 290 | 11 to 1640 |
| Heat rating current (A) | 0.35 to 4.2 | 1 to 7.8 | 0.9 to 10.3 |
| Saturation current (A)(¹) | 0.4 to 8.5 | 1 to 11 | 0.9 to 14 |
| SRF typ. (MHz) | 2 to 110 | 6 to 85 | 1.3 to 35 |
(¹)DC current (A) that will cause L0 to drop approximately 30 %
Samples and production quantities of the IFSC and IFDC inductors are available now, with lead times of 10 to 12 weeks.
Vishay manufactures one of the world’s largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Serving customers worldwide, Vishay is The DNA of tech.® Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH). More on Vishay at www.Vishay.com.
The DNA of tech® is a registered trademark of Vishay Intertechnology, Inc.
Vishay on Facebook: http://www.facebook.com/VishayIntertechnology
Vishay Twitter feed: http://twitter.com/vishayindust
Link to product datasheets:
http://www.vishay.com/ppg?34083 (IFSC-2020DE-01)
http://www.vishay.com/ppg?34607 (IFSC-3232DB-01)
http://www.vishay.com/ppg?34612 (IFDC-5050HZ)
Link to product photo:
https://www.flickr.com/photos/vishay/albums/72177720319340717
For more information please contact:
Vishay Intertechnology
Peter Henrici, +1 408 567-8400
peter.henrici@vishay.com
or
Redpines
Bob Decker, +1 415 409-0233
bob.decker@redpinesgroup.com
FAQ
What are the key features of Vishay's new IFDC and IFSC series inductors?
What are the applications for Vishay's new IFDC and IFSC inductors?
When will Vishay's new IFDC and IFSC inductors (VSH) be available?
What are the case sizes for Vishay's new IFDC and IFSC inductors?
