STOCK TITAN

Torq Makes New Discovery at its Margarita Iron-Oxide Copper-Gold Project: 90 metres of 0.94% Copper and 0.84 g/t Gold

Rhea-AI Impact
(Neutral)
Rhea-AI Sentiment
(Positive)
Tags
Rhea-AI Summary

Torq Resources announced a significant discovery of a new copper and gold sulfide system at its Margarita project in Chile, following a 4,075 m drill program. Drill hole 22MAR-013R revealed 90 m of 0.94% copper and 0.84 g/t gold between 50 m and 140 m depth. The results validate the company’s exploration strategy and suggest substantial IOCG discovery potential. The company is planning a follow-up drilling phase and has expanded its land position by acquiring an additional 200 hectares to enhance exploration prospects.

Positive
  • Discovery of a new copper and gold sulfide system at Margarita project.
  • Drill hole 22MAR-013R intersected 90 m of 0.94% copper and 0.84 g/t gold.
  • Confirmation of exploration thesis and potential for significant IOCG discovery.
  • Plans for a follow-up drill program to explore further opportunities.
  • Increased land position by acquiring an additional 200 hectares.
Negative
  • None.

VANCOUVER, BC / ACCESSWIRE / May 2, 2022 / Torq Resources Inc. (TSX-V:TORQ)(OTCQX:TRBMF) ("Torq" or the "Company") is pleased to announce the discovery of a new copper and gold sulphide system as a result of its maiden 4,075 metre (m) reverse - circulation (RC) drill program at its Margarita Iron-Oxide-Copper-Gold (IOCG) project, located in northern Chile about 65 kilometres (km) north of the city of Copiapo. Drill hole 22MAR-013R intersected 90 m of 0.94% copper and 0.84 g/t gold at a depth of 50 m - 140 m. This discovery successfully identified the copper and gold sulphide source mineralization to the abundant copper oxide mineralization observed on the southern margin of the project, validating the Company's exploration thesis, and represents the potential for a significant new IOCG discovery in the Cretaceous Coastal Cordillera belt in northern Chile (Figure 1). A summary of the drill results is presented in Table 1.

A Message from Shawn Wallace, Executive Chair:

"This copper and gold discovery drill hole is a remarkable success for Torq. After only acquiring the Margarita project a year ago, our team was able to uncover the potential for an entirely new IOCG deposit in Chile from its maiden 13-hole drill program on a project that had never been drilled before. We are incredibly impressed by the work of our technical team and their ability to move quickly and methodically in recognizing the opportunity at Margarita at an early stage and then delivering the kind of results all exploration companies strive for. We are now diligently preparing for a follow-up drill program and will update shareholders and stakeholders of our plans in the very near future."

A Message from Michael Henrichsen, Chief Geological Officer:

"In the first ever modern drill program at the Margarita project, the Company has demonstrated the true potential of the property with a meaningful discovery. The mineralization has a clear signature over a 1 km strike length, and we believe there is significant potential for the project to host a substantial mineralized body. We greatly look forward to the second phase of drilling this summer when we will aim to outline a world-class IOCG deposit."

A Message from Waldo Cuadra, General Manager of Chile:

"Rarely does an exploration team on its first drill program achieve noteworthy success with the discovery of a significant mineralized section. The Margarita project has the potential to be Chile's next major IOCG discovery, and after a long process of monitoring this project over the years, it is very gratifying to drill Margarita successfully with a team of experienced and motivated geologists as well as the full support of our executive team in Vancouver. I am proud to lead our team of geologists in Chile toward our objective of defining an IOCG - type deposit."

Table 1: Summary of drill results

Hole ID

From

To

Length

Cu %

Au g/t

Au g/t

Cu %

0.2% Cu Cutoff1

0.1 g/t Au Cutoff2

21MAR-001R

No significant intervals

21MAR-002R

6

18

12

0.31

0.014

-

-

300

304

4

-

-

0.175

0.01

21MAR-003R

54

70

16

0.22

0.042

-

-

96

106

10

0.33

0.031

-

-

22MAR-004R

14

28

14

0.29

0.125

-

-

16

28

12

-

-

0.134

0.30

52

62

10

0.32

0.035

-

-

74

90

16

0.32

0.034

-

-

22MAR-005R

No significant intervals

22MAR-006R

4

24

20

-

-

0.267

0.10

30

52

22

-

-

0.127

0.12

22MAR-007R

54

68

14

0.32

0.016

22MAR-008R

22

30

8

-

-

0.180

0.06

40

42

2

-

-

0.250

0.11

58

72

14

-

-

0.126

0.05

22MAR-009R

No significant intervals

22MAR-010R

No significant intervals

22MAR-011R

No significant intervals

22MAR-012R

Results pending

22MAR-013R

50

140

90

0.94

0.838

-

-

64

140

76

-

-

0.983

1.02

200

202

2

0.59

0.095

-

-

294

318

24

-

-

0.156

0.10

  1. Intervals - no less than 5m of >= 0.2 % Cu, maximum consecutive dilution 5m
  2. Intervals - no less than 5m of >= 0.1 g/t Au, maximum consecutive dilution 5m

Technical Discussion of Drill Hole 22MAR-013R:

The discovery of significant iron-oxide-copper-gold mineralization was made through a combination of geological, geochemical and geophysical vectors. The mineralization is situated along the north-northwest trending Falla 13 strike-slip reverse structure, which has been mapped on the property over a strike length of at least 2 km with associated strong hematite-argillic-sericitic alteration (Figure 2-3). Soil geochemistry conducted using portable X-Ray fluorescence (pXRF) shows a 900 m copper anomaly situated along the Falla 13 structure, which is coincident with the mineralization in drill hole 22MAR-013R (Figure 4). Importantly, this copper-in-soils anomaly is terminated to the south by volcanic cover associated with the Remolino rhyolite dome. The Company's technical team believes this mineralized signature has the potential to extend beneath this cover sequence of volcanic rocks. In addition, there is a strong correlation between the mineralized intercept and strong magnetic and conductivity highs from ground-based geophysical surveys, which are associated with magnetite, copper sulphide mineralization and strong hydrothermal alteration along the Falla 13 structure, respectively (Figures 5-6). Collectively, the geological, geochemical and geophysical signatures encountered in drill hole 22MAR-013R extend along strike for approximately 1 km, demonstrating the potential to expand on the initial discovery.

Drill hole 22MAR-013R is hosted within a wide structural corridor, which is interpreted to exist at a depth between 20 m - 250 m, and which exhibits a typical IOCG zonation where the higher grade mineralization is associated with shallow silica-hematite-pyrite-chalcopyrite mineral assemblage that grades vertically downward into a magnetite-hematite-chalcopyrite-pyrite mineral assemblage at a depth of 50 m - 140 m. The higher grade mineralization is interpreted to be associated with breccia bodies and associated veining hosted within a diorite and quartz diorite intrusive complex. The upper portion of the mineralized intercept, from 40 m - 106 m, is characterized as a zone of mixed secondary iron and copper oxide minerals and a sulphide mineral assemblage of chalcopyrite and pyrite that grades into sulphide-only mineralization at a depth of 106 m - 140 m (Figure 7). From 140 m - 192 m, mineralization is characterized by abundant pyrite mineralization (5%-20%) with low copper values averaging 48 parts per million (ppm). From 192 m - 250 m, the mineralization is characterized by primary 5%-10% pyrite mineralization, with an average of 768 ppm copper that is associated with silica-magnetite-hematite alteration. The hole ended with 250 m - 360 m of silica-chlorite and calc-sodic alteration showing intervals with over 20% of disseminated pyrite. The Company is currently planning a follow-up drill program to continue to explore the Falla 13 structural corridor over an approximate strike length of 1 km.

Increased Land Position:

The Company has increased its land position at the Margarita project, acquiring an additional 200 hectares on the northern margin of the property, in order to expand the exploration potential as well as to create a larger buffer around the discovery drill hole, 22MAR-013R (Figure 8).

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 1: Illustrates the position of the discovery hole in the north - central region of the project along the Falla 13 structural corridor.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 2: Illustrates a cross section of the structurally controlled mineralization associated with silica-hematite-magnetite bodies, as highlighted by the red colour, encountered in drill hole 22MAR-013R.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 3: Illustrates a view to the north of the Falla 13 structural corridor. The surface expression of mineralization encountered in drill hole 22MAR-013R is represented by strong silica-hematite alteration with sulphide boxwork, limonite and copper-oxide staining along fractures.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 4: Illustrates the 900 m copper-in-soils geochemical anomaly, as defined by portable X-ray flouresence (pXRF) along the Falla 13 structural corridor.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 5: Illustrates the magnetic high associated with the mineralization encountered in drill hole 22MAR-013R, which is interpreted to be associated with magnetite breccia bodies and associated copper - gold mineralization.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 6: Illustrates the conductivity high associated with the mineralization encountered in drill hole 22MAR-013R, which is interpreted to be associated with intense potassic and sodic alteration along the Falla 13 structural corridor.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 7: Illustrates the mixed oxide/sulphide and sulphide-only styles of mineralization observed within the RC chips that display abundant chalcopyrite and pyrite.

Torq Resources Inc. , Monday, May 2, 2022, Press release picture

Figure 8: Illustrates the newly acquired land position on the northern margin of the project where 200 additional hectares were added to the project with the acquisition of the Par a Once and Par a Doce claims.

Michael Henrichsen P.Geo, Torq's Chief Geological Officer, is the qualified person as defined by NI 43-101 (Standards of Mineral Disclosure) who assumes responsibility for the technical contents of this press release.

ON BEHALF OF THE BOARD,

Shawn Wallace
Executive Chair

For further information on Torq Resources, please visit www.torqresources.com or contact Natasha Frakes, Vice President of Corporate Communications at (778) 729-0500 or info@torqresources.com.

About Torq Resources

Torq is a Vancouver-based copper and gold exploration company with a portfolio of premium holdings in Chile. The Company is establishing itself as a leader of new exploration in prominent mining belts, guided by responsible, respectful and sustainable practices. The Company was built by a management team with prior success in monetizing exploration assets and its specialized technical team is recognized for their extensive experience working with major mining companies, supported by robust safety standards and technical proficiency. The technical team includes Chile-based geologists with invaluable local expertise and a noteworthy track record for major discovery in the country. Torq is committed to operating at the highest standards of applicable environmental, social and governance practices in the pursuit of a landmark discovery. For more information, visit www.torqresources.com.

Margarita Drilling

Analytical samples were taken using 1/8 of each 2m interval material (chips) and sent to ALS Lab in Copiapo, Chile for preparation and then to ALS Labs in Santiago, Chile and Lima, Peru for analysis. Preparation included crushing core sample to 70% < 2mm and pulverizing 250g of crushed material to better than 85% < 75 microns. All samples are assayed using 30g nominal weight fire assay with AAS finish (Au-AA23), multi-element four acid digest ICP-AES/ICP-MS method (ME-MS61), and copper sulphuric acid leach with AAS finish (Cu-AA05). Where MS61 results were greater or near 10,000 ppm Cu the assay were repeated with ore grade four acid digest method (Cu-OG62). Where Au-AA23 results were greater than 10 ppm Au the assay were repeated with 30 g nominal weight fire assay with gravimetric finish (Au-GRA22). QA/QC programs for 2022 RC drilling samples using internal standard samples, field and lab duplicates, standards and blanks indicate good accuracy and precision in a large majority of standards assayed.

True widths of mineralization are unknown based on current geometric understanding of the mineralized intervals.

Canadian mineral terminology and standards differ from those of other countries. The Company's public disclosure filings highlight some of these differences.

Forward Looking Information

This release includes certain statements that may be deemed "forward-looking statements". Forward-looking information is information that includes implied future performance and/or forecast information including information relating to, or associated with, exploration and or development of mineral properties. These statements or graphical information involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of the Company to be materially different (either positively or negatively) from any future results, performance or achievements expressed or implied by such forward-looking statements. See Torq's public filings at ww.sedar.com for disclosure of the risks and uncertainties faced in this business.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Torq Resources Inc.



View source version on accesswire.com:
https://www.accesswire.com/699639/Torq-Makes-New-Discovery-at-its-Margarita-Iron-Oxide-Copper-Gold-Project-90-metres-of-094-Copper-and-084-gt-Gold

FAQ

What were the key results from Torq Resources' drill program at Margarita?

Drill hole 22MAR-013R intersected 90 m of 0.94% copper and 0.84 g/t gold.

How deep was the intersection in drill hole 22MAR-013R?

The intersection was between 50 m and 140 m depth.

What does the discovery at Margarita suggest for Torq Resources?

It suggests substantial potential for a new IOCG discovery, validating their exploration strategy.

What are the future plans for the Margarita project?

Torq Resources is planning a follow-up drill program to explore the Falla 13 structural corridor.

How has Torq Resources expanded its Margarita project?

Torq Resources has increased its land position by acquiring an additional 200 hectares.

TORQ RESOURCES INC

OTC:TRBMF

TRBMF Rankings

TRBMF Latest News

TRBMF Stock Data

6.86M
97.32M
29.71%
1.39%
Other Industrial Metals & Mining
Basic Materials
Link
United States of America
Vancouver