Update to Elizabeth Blue Vein Drilling - Visible Gold Observed

Rhea-AI Summary

Tempus Resources Ltd (TMRFF) has reported further visible gold discoveries in drill hole EZ-22-03 at the Elizabeth Gold Project in Southern British Columbia. The drill revealed two zones of quartz veining with visible gold at depths of approximately 96.9 to 97.3 meters and 124.0 to 124.1 meters. Additional grains of gold were noted on the cut core. The core samples are set to be sent to SGS Laboratories for assay results, expected in 1-2 months. Tempus plans to drill 15 additional holes this year to further explore the Blue Vein mineralization, which has previously shown promising results.

Positive

• Discovery of visible gold in drill hole EZ-22-03 at depths of 96.9-97.3m and 124.0-124.1m.
• Previous high-grade intersections include 1.0m at 33.7g/t Au.
• Plans for 15 additional drill holes targeting Blue Vein expansion.

Negative

• Visual observations indicate that visible gold is less than 0.01%, which is low.
• No massive sulphide mineralization encountered in the drill hole.

PERTH, AUSTRALIA / ACCESSWIRE / June 20, 2022 / Tempus Resources Ltd ("Tempus" or "the Company") (ASX:TMR)(TSXV:TMRR)(OTC PINK:TMRFF) is pleased to provide a further update on the visible gold observed in Drill Hole EZ-22-03 at the Elizabeth Gold Project in Southern British Columbia, Canada.

As reported on 14 June 2022, drill hole EZ-22-03, intersected two zones of quartz veining that show the presence of visible gold ("VG") at a down-hole depth of approximately 96.9 to 97.3 metres and with a second observation of visible gold around 124.0 to 124.1 metres. See Image 1.

Following the cutting of the core in preparation for assay, several more grains of visible gold have been observed on the inside of the cut core at the down-hole depth of approximately 96.9 to 97.3 metres. See Image 2.

Image 1. EZ-22-03. Blue Vein with visible gold in uncut core at 97m and 124m

Image 2. EZ-22-03. Blue Vein with visible gold in cut core at 97m

With reference to the AIG 2015 guidance for visual reporting of massive sulphide mineralisation, the Company reports it has not encountered any massive sulphide mineralisation in drill hole EZ-22-03. While it is not possible to accurately estimate the percentage of visual gold present though out the drill core, the Company suggests that the percentage would be less than the 0.01%. The Company cautions that visual observations of visible gold are not a proxy or substitute for laboratory analysis. Laboratory assays and analysis will be required to confirm the visual interpretations presented in this news release.

The core from the first three drill holes is being prepared for transport to SGS Laboratories in Vancouver, Canada for assay. Assay results will be released when received and are will be received in approximately 1 to 2 months from the time the core is received by the lab.

The Blue Vein was discovered in 2021 (EZ21-12 including 1.0m at 33.7g/t Au) with a total of 7 holes intersecting the vein to date (including three holes with ‘bonanza' grade intersections, i.e., greater than 1oz per tonne), high-grade gold mineralisation was identified over a strike length of over 80 metres in 2021. Approximately fifteen (15) holes have been planned this year to target the expansion of the Blue Vein high-grade gold mineralisation along strike and down dip. The drilling will test the Blue Vein gold mineralisation over a total strike length of approximately 400 metres.

Figure 1 - Elizabeth Plan View Showing 2022 Drill Locations

Figure 2 - Elizabeth Blue Vein Long Section (looking Northwest)

This announcement has been authorised by the Board of Directors of Tempus Resources Limited.

Competent Persons Statement

Information in this report relating to Exploration Results is based on information reviewed by Mr. Sonny Bernales, who is a Member of the Engineers and Geoscientists British Columbia (EGBC), which is a recognised Professional Organisation (RPO), and an employee of Tempus Resources. Mr. Bernales has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined by the 2012 Edition of the Australasian Code for reporting of Exploration Results, Mineral Resources and Ore Reserves, and as a Qualified Person for the purposes of NI43-101. Mr. Bernales consents to the inclusion of the data in the form and context in which it appears.

For further information:

TEMPUS RESOURCES LTD

Melanie Ross - Director/Company Secretary Phone: +61 8 6188 8181

About Tempus Resources Ltd

Tempus Resources Ltd ("Tempus") is a growth orientated gold exploration company listed on ASX ("TMR") and TSX.V ("TMRR") and OTCQB ("TMRFF") stock exchanges. Tempus is actively exploring projects located in Canada and Ecuador. The flagship project for Tempus is the Blackdome-Elizabeth Project, a high grade gold past producing project located in Southern British Columbia. Tempus is currently midway through a drill program at Blackdome-Elizabeth that will form the basis of an updated NI43-101/JORC resource estimate. The second key group of projects for Tempus are the Rio Zarza and Valle del Tigre projects located in south east Ecuador. The Rio Zarza project is located adjacent to Lundin Gold's Fruta del Norte project. The Valle del Tigre project is currently subject to a sampling program to develop anomalies identified through geophysical work.

Forward-Looking Information and Statements

This press release contains certain "forward-looking information" within the meaning of applicable Canadian securities legislation. Such forward-looking information and forward-looking statements are not representative of historical facts or information or current condition, but instead represent only the Company's beliefs regarding future events, plans or objectives, many of which, by their nature, are inherently uncertain and outside of Tempus's control. Generally, such forward-looking information or forward-looking statements can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or may contain statements that certain actions, events or results "may", "could", "would", "might" or "will be taken", "will continue", "will occur" or "will be achieved". The forward-looking information and forward-looking statements contained herein may include, but are not limited to, the ability of Tempus to successfully achieve business objectives, and expectations for other economic, business, and/or competitive factors. Forward-looking statements and information are subject to various known and unknown risks and uncertainties, many of which are beyond the ability of Tempus to control or predict, that may cause Tempus' actual results, performance or achievements to be materially different from those expressed or implied thereby, and are developed based on assumptions about such risks, uncertainties and other factors set out herein and the other risks and uncertainties disclosed under the heading "Risk and Uncertainties" in the Company's Management's Discussion & Analysis for the quarter and nine months ended March 31, 2022 dated May 16, 2022 filed on SEDAR. Should one or more of these risks, uncertainties or other factors materialize, or should assumptions underlying the forward-looking information or statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although Tempus believes that the assumptions and factors used in preparing, and the expectations contained in, the forward-looking information and statements are reasonable, undue reliance should not be placed on such information and statements, and no assurance or guarantee can be given that such forward-looking information and statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information and statements.

The forward-looking information and forward-looking statements contained in this press release are made as of the date of this press release, and Tempus does not undertake to update any forward-looking information and/or forward-looking statements that are contained or referenced herein, except in accordance with applicable securities laws. All subsequent written and oral forward-looking information and statements attributable to Tempus or persons acting on its behalf are expressly qualified in its entirety by this notice.

Neither the ASX Exchange, the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Appendix 1

Table 1:Drill Hole Collar Table

		UTM	UTM
Hole ID	Target	Easting (NAD83	Northing (NAD83	Elevation (m)	Length (m)	Azimuth	Dip
		Z10)	Z10)
EZ-22-01	Blue Vein	530953	5653772	2400	222	130	-65
EZ-22-02	Blue Vein	531203	5653772	2400	225	108	-65
EZ-22-03	Blue Vein	531203	5653772	2400	198	95	-50

Appendix 2: The followingtables are providedto ensure compliance with the JORC Code (2012) requirements for the reporting of Exploration Results for the Elizabeth - Blackdome Gold Project

Section 1: SamplingTechniques and Data

(Criteria in this section apply to all succeeding sections.)

Criteria	JORC Code explanation	Commentary
Sampling techniques	Nature and qualityof sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gammasondes, or handheld XRF instruments, etc).These examples shouldnot be taken as limiting the broad meaningof sampling. Include reference to measures taken to ensuresample representivity and the appropriate calibration of any measurement tools or systemsused. Aspects of the determination of mineralisation that are Materialto the Public Report. In cases where ‘industry standard' work has been done this would be relatively simple(eg ‘reverse circulation drilling was used to obtain1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types(eg submarine nodules) may warrant disclosure of detailed information.	HQ(63.5 mm) sized diamond core using standardequipment. Mineralised and potentially mineralised zones, comprising veins, breccias, and alteration zoneswere sampled. Samples were half core. Typical core samples are 1m in length. Core samples sent to the lab will be crushed and pulverized to 85% passing75 microns. A 50g pulp will be fire assayedfor gold and multi-element ICP.Samples over 10 g/t gold will be reanalysed by fire assay withgravimetric finish
Drilling techniques	Drill type (eg core, reversecirculation, open-hole hammer,rotary air blast, auger, Bangka,sonic, etc) and details (eg core diameter, triple or standardtube, depth of diamond tails, face-sampling bit or other type, whethercore is oriented and if so, by what method, etc).	Diamond Drilling from surface(HQ size)
Drill sample recovery	Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise samplerecovery and ensurerepresentative nature of the samples. Whether a relationship exists between samplerecovery and grade and whethersample bias may have occurred due to preferential loss/gain of fine/coarse material.	Detailed calculation of recoverywas recorded, withmost holes achieving over 95% Norelationship has yet been noted between recovery and grade and no sample bias was noted to have occurred.

Criteria	JORC Code explanation	Commentary
Logging	Whether core and chip sampleshave been geologically and geotechnically loggedto a level of detailto support appropriate Mineral Resource estimation, mining studies and metallurgical studies. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. The total length and percentage of the relevantintersections logged.	Detailed geological and geotechnical logging was completed for each hole. All core has been photographed. Complete holes were logged.
Sub- sampling techniques and sample preparation	If core, whethercut or sawn and whetherquarter, half or all core taken. If non-core, whetherriffled, tube sampled,rotary split, etc and whethersampled wet or dry. For all sample types, the nature, qualityand appropriateness of the samplepreparation technique. Quality control procedures adopted for all sub- sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance resultsfor field duplicate/second-half sampling. Whether sample sizes are appropriate to the grainsize of the material being sampled.	Half core was sampled, using a core saw. Duplicate samples of new and historical core are Quarter core or half core where not previously sampled Sample sizes are considered appropriate for the grain size of the material being sampled. Itis expected that bulk sampling will be utilisedas the projectadvances, to more accurately determine grade.
Quality of assay data andlaboratory tests	The nature, qualityand appropriateness of the assaying and laboratory procedures used and whetherthe technique is considered partialor total. For geophysical tools,spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, readingtimes, calibrations factorsapplied andtheir derivation, etc. Nature of qualitycontrol procedures adopted(eg standards, blanks,duplicates, external laboratory checks) and whetheracceptable levels of accuracy (ie lack of bias) and precision have been established.	Core samples that have been sent to the lab for analysis includecontrol samples (standards, blanks and prep duplicates) inserted at a minimumrate of 1:5 samples. Inaddition to the minimum rate of inserted control samples, a standard or a blank is inserted following a zoneof mineralization or visible gold Further duplicate samples were analysed to assess variability
Verification of sampling and assaying	The verification of significant intersections by either independent or alternative companypersonnel. Theuse of twinnedholes. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Discuss any adjustment to assay data.	Re-assaying of selected intervals of historic corehave been sent for analysis.

Criteria	JORC Code explanation	Commentary
Location of data points	Accuracy and qualityof surveys used to locatedrill holes (collarand down-hole surveys), trenches, mine workings and other locations used in MineralResource estimation. Specification of the grid system used. Quality and adequacyof topographic control.	Allsampling points were surveyed using a hand held GPS. UTMgrid NAD83 Zone 10. A more accurate survey pickup will be completed at the end of the program, to ensure data is appropriate for geological modelling and Resource Estimation. Down hole surveys have been completed on all holes.
Data spacing and distribution	Data spacing for reporting of Exploration Results. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserveestimation procedure(s) and classifications applied. Whether sample compositing has been applied.	Most drilling is targeting verification and extension of known mineralisation. Itis expected that the data will be utilised in a preparation of a MineralResource statement. Additional drilling is exploration beneath geochemical anomalies, and would requirefurther delineation drilling to be incorporated in a MineralResource.
Orientation of data in relation to geological structure	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering thedeposit type. If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias,this should be assessed and reported if material.	Ingeneral, the aim was to drill perpendicular to the mineralised structures, to gain an estimate of the true thickness of the mineralised structures. At several locations, a series (fan) of holes was drilled to help confirm the orientation of the mineralised structures and to keep land disturbance to a minimum.
Sample s Security	Themeasures taken to ensure samplesecurity.	Samples from Elizabeth were delivered to the laboratory by a commercial transport service.
Audits or Reviews	Theresults of any audits or reviews of sampling techniques and data.	Anindependent geological consultant has recently visited the site as part of preparing an updated NI43-101Technical Report for the Project.

Section 2: Reportingof Exploration Results

(Criteria listed in the preceding section also apply to this section.)

Criteria	JORC Code explanation	Commentary
Mineral tenement andland tenure status	Type, reference name/number, location and ownership including agreements or material issueswith third partiessuch as joint ventures, partnerships, overriding royalties, nativetitle interests, historical sites, wilderness or national park and environmental settings. The security of the tenureheld at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	TheBlackdome-Elizabeth Project is comprised of 73 contiguous mineral claims underlain by 14 Crown granted mineral claims and two mining leases. TheProperty is locatedin the Clinton and Lillooet Mining Divisions approximately 230 km NNE of Vancouver Tempus has exercised the option to acquire the Elizabeth Gold Project and has completed an addendum to the original Elizabeth Option Agreement (refer to ASX announcement 15 December 2020) Anet smelter royaltyof 3% NSR (1% purchasable) applies to severalclaims on the Elizabeth Property. Noroyalties apply to the Blackdome Property or Elizabeth Regional Properties. There are currently no known impediments to developing a project in this area, and all tenure is in good standing.
Exploration done by other parties	Acknowledgment and appraisal of exploration by other parties.	Inthe 1940s, placergold was discovered in Fairless Creek west of Blackdome Summit.Prospecting by Lawrence Frenier shortly afterward led to the discovery of gold-bearing quartzveins on the southwest slopeof the mountain that resulted in the stakingof mining claimsin 1947. EmpireValley Gold Mines Ltd and Silver Standard Resources drove two adits and completed basic surface work during the 1950s. TheBlackdome area was not workedagain until 1977 when Barrier Reef Resources Ltd. re-staked the area and performed surface work in addition to underground development. The Blackdome Mining Corp. was formed in 1978 and performed extensive surface and underground work with variousjoint venture partnersthat resulted in a positive feasibility study. A 200 ton/daymill, camp facilities and tailings pond were constructed and mining operations officially commenced in 1986. The mine ceasedoperations in 1991,having produced 225,000oz of Au and 547,000oz of Ag from 338,000tons of ore (Godard et al., 2010) After a period of inactivity, Claimstaker Resources Ltd. tookover the project, reopening the mine in late 1998.

Criteria	JORC Code explanation	Commentary
		Mining operations lastedsix months and ended in May of 1999. During this period,6,547 oz of Au and 17,300 oz of Ag were producedfrom 21,268 tons of ore. Further exploration programs were continued by Claimstaker over the following years and a Japanese joint venture partnerwas brought onboardthat prompted a name changeto J-Pacific Gold Inc. This partnership was terminated by 2010, resulting in another name change to Sona Resources Corp. Gold-bearing quartz veins were discovered near Blue Creek in 1934, and in 1940-1941 the Elizabeth No. 1-4 claims were staked. Bralorne Mines Ltd. optioned the property in 1941 and during the period 1948-1949, explored the presently- named Main and West Veins by about 700 metresof cross-cutting and drifting, as well as about 110 metres of raises. After acquiring the Elizabeth Gold Project in 2002, J- Pacific (now Sona) has conducted a series of exploration programs that included diamonddrilling 66 holes totalling 8962.8 metres (up until 2009) Other exploration work by Sona at the Elizabeth Gold Project has included two soil grid, stream sediment sampling, geological mappingand sampling, underground rehabilitation, structural mapping and airborne photography and topographic base map generation.
Geology	Deposit type, geological setting and styleof mineralisation.	TheBlackdome property is situated in a regionunderlain by rocks of Triassicto Tertiary age. Sedimentary and igneous rocks of the Triassic Pavilion Group occurring along the FraserRiver represent the oldest rocks in the region. A large, Triassic age, ultramafic complex(Shulaps Complex) was emplaced along the Yalakomfault; a regional scale structure locatedsome 30 kilometres south of the property. Sediments and volcanics of the Cretaceous Jackass Mountain Groupand Spences Bridge/Kingsvale Formations overlie the Triassic assemblages. Some of these rocks occur several kilometres south of Blackdome. Overlying the Cretaceous rocks are volcanics and minor sediments of Eocene age.These rocks underlie much of Blackdome and are correlated with the KamloopsGroup seen in the Ashcroft and Nicola regions.

Criteria	JORC Code explanation	Commentary
		Geochemical studies (Vivian,1988) have shownthese rocks to be derivedfrom a "calc-alkaline" magma in a volcanicarc type tectonicsetting. Eocene age granitic intrusions at Poison Mountain some 22 kilometres southwest of Blackdome are host to a gold bearing porphyry copper/molybdenum deposit. It is speculated that this or related intrusions could reflect the source magmas of the volcanic rocks seen at Blackdome. There is some documented evidenceof young graniticrocks several kilometres south of the mine near Lone Cabin Creek. The youngest rocks present are Oligocene to Miocene basalts of the Chilcotin Group. These are exposed on the uppermost slopes of Blackdome Mountain and Red Mountain to the south. Transecting the property in a NE-SWstrike direction are a seriesof faults that range from vertical to moderately westerly dipping. These faultsare the principal host structures for Au- Ag mineralisation. The faults anastomose, and form sygmoidal loops. Thearea in which the Elizabeth Gold Project is situated is underlain by Late Paleozoic to Mesozoic rock assemblages that are juxtaposed across a complexsystem of faultsmainly of Cretaceous and Tertiary age. These Paleozoic to Mesozoic-age rocks are intrudedby Cretaceous and Tertiary-age stocksand dykes of mainly felsicto intermediate composition, and are locallyoverlain by Paleogene volcanic and sedimentary rocks. The Elizabeth Gold Project is partly underlain by ultramafic rocksof the Shulaps Ultramafic Complex,which include harzburgite, serpentinite and theiralteration product listwanite. Thegold mineralisation foundon the Elizabeth Gold Project presentcharacteristics typical of epigenetic mesothermal gold deposits. The auriferous quartz vein mineralisation is analogous to that foundin the Bralorne- Pioneer deposits. Gold mineralisation is hosted by a seriesof northeast trending, steeply northwest dippingveins that crosscut the Blue Creek porphyry intrusion. The Main and West vein systems displaymesothermal textures, including ribboned-laminated veins and comprehensive wall rock breccias. Vein formation and gold mineralisation were associated with extensional- brittle faulting believed to be contemporaneous with mid- Eocene extensional faulting along the Marshall Creek,Mission Ridge and Quartz Mountain faults.

Criteria	JORC Code explanation	Commentary
Drill hole Information	A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: easting and northing of the drill hole collar elevation or RL (Reduced Level- elevation abovesea level in metres) of the drill hole collar dip and azimuth of the hole down hole lengthand interception depth hole length. If the exclusion of this information is justified on the basisthat the information is not Material and this exclusion does not detractfrom the understanding ofthe report, the Competent Person should clearlyexplain why this isthe case.	Refer to Appendix 1 for drillhole collar information
Data aggregation methods	In reporting Exploration Results, weighting averaging techniques, maximum and/orminimum grade truncations (eg cutting of high grades)and cut-off gradesare usually Material and should be stated. Where aggregate intercepts incorporate short lengthsof high grade results and longer lengthsof low grade results, the procedure used for such aggregation shouldbe stated and some typicalexamples of such aggregations shouldbe shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated.	Intervals reported using severalsamples are calculated using a weighted average. Calculated intervals using a weighted averagedid not use a top cut on high-grade samples.High-grade samples are reported as ‘including' Calculated weighted average intervals are continuous intervals of a mineralized zone and do not includeunsampled intervals or unmineralized intervals.
Relationship between mineralisation widthsand intercept lengths	These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralisation with respect to the drill hole angle is known,its nature shouldbe reported. If it is not known and only the down hole lengthsare reported, thereshould be a clear statement to this effect(eg ‘down hole length, true width not known').	Ingeneral, drilling is designed to intersect the mineralized zone at a normal angle,but this is not always possible. Forthe reported intervals, true widths are reported where mineralized core was intactand possible to measure the orientation. Otherwise the true widthis left blank
Diagrams	Appropriate maps and sections (with scales) and tabulations of intercepts shouldbe included for any significant discovery being reportedThese should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	Refer to maps withinannouncement for drillhole locations.

Criteria	JORC Code explanation	Commentary
Balanced reporting	Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widthsshould be practiced to avoid misleading reporting of Exploration Results.	Where broader low-grade intervals are reported the high-grade intercepts are reported as ‘including' within the reported interval
Other substantive exploration data	Other exploration data, if meaningful and material, shouldbe reported including (but not limitedto): geological observations; geophysical survey results;geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	Tempus recently completed an airborne magnetic and radiometric survey over the Elizabeth Gold Project (refer to ASX announcement 02 August 2021) by completing 97 lines for a total of 735 line-kilometres. Flight lines are oriented east-west with north-south tie lines and spaced 200 metres across the entire 115km2 Elizabeth property. Line spacing of 100 metres was flown over the Elizabeth Main and Elizabeth East Zones. The airborne magnetic survey data was reviewed and interpreted by Insight Geophysics Inc. using 3D magnetization vector inversion (MVI) modelling. The geophysical surveys identified the Blue Creek Porphyry, which is the known host of the high-grade Elizabeth gold-quartz veins, as a relative magnetic low anomaly within the Shulaps Ultramafic Complex. From this correlation of geology and geophysics it was determined that the Blue Creek Porphyry, originally explored / mapped to approximately 1.1km2 in size, is likely much larger. The airborne magnetic survey and MVI 3D modelling interpret the Blue Creek Porphyry to be at least four-times the size at approximately 4.5km2. This interpretation of the Blue Creek Porphyry is also extensive at depth extending to at least 2km deep
Further work	The nature and scale of planned furtherwork (eg testsfor lateral extensions or depth extensions or large- scale step-out drilling). Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drillingareas, provided this information is not commercially sensitive.	Tempus plans to updatehistorical NI43-101 foreignresource estimates to current NI43-101 and JORC 2012 standards Tempus is also seekingto expand the scale of the mineralisation at the projectthrough further exploration.

SOURCE: Tempus Resources Ltd

View source version on accesswire.com:
https://www.accesswire.com/705710/Update-to-Elizabeth-Blue-Vein-Drilling--Visible-Gold-Observed

FAQ

What recent discoveries has Tempus Resources made at the Elizabeth Gold Project?

Tempus Resources reported visible gold in drill hole EZ-22-03 at depths of 96.9-97.3m and 124.0-124.1m.

When can we expect assay results from the recent drilling at Tempus Resources?

Assay results from the core samples are expected in approximately 1-2 months.

How many drill holes is Tempus Resources planning for this year?

Tempus Resources plans to drill 15 additional holes targeting the Blue Vein mineralization.

What were some previous high-grade results reported by Tempus Resources?

Previous results include intersections like 1.0m at 33.7g/t Au in earlier drill holes.

Did Tempus Resources encounter any massive sulphide mineralization in their drilling?

No massive sulphide mineralization was encountered in drill hole EZ-22-03.