Talon Metals Makes New Copper-Nickel Discovery in Michigan
Talon Metals has made a significant copper-nickel discovery at its Boulderdash target in Michigan's Upper Peninsula. The maiden drill hole intercepted 99.92 meters of mineralization starting at just 9.14 meters depth, including 48.00 meters grading 2.11% Copper Equivalent. The discovery site is located 8 miles northwest of the Eagle Nickel Mine, the only operating nickel mine in the U.S. The target was identified through field prospecting and geophysical techniques, tracing mineralized boulders to their source. This discovery is part of Talon's option agreement with UPX Minerals to acquire up to 80% ownership interest in approximately 400,000 acres of mineral rights in Michigan.
Talon Metals ha fatto una scoperta significativa di rame-nichel nel suo obiettivo Boulderdash nella Penisola Superiore del Michigan. Il primo foro di perforazione ha intercettato 99,92 metri di mineralizzazione a partire da una profondità di appena 9,14 metri, compresi 48,00 metri con un grado di 2,11% di equivalente rame. Il sito della scoperta si trova a 8 miglia a nord-ovest della Eagle Nickel Mine, l'unica miniera di nichel attiva negli Stati Uniti. L'obiettivo è stato individuato attraverso la prospezione sul campo e tecniche geofisiche, tracciando i massi mineralizzati fino alla loro fonte. Questa scoperta è parte dell'accordo di opzione di Talon con UPX Minerals per acquisire fino all'80% di interesse di proprietà su circa 400.000 acri di diritti minerari in Michigan.
Talon Metals ha realizado un importante descubrimiento de cobre-níquel en su objetivo Boulderdash en la Península Superior de Michigan. El primer pozo de perforación interceptó 99.92 metros de mineralización comenzando a solo 9.14 metros de profundidad, incluyendo 48.00 metros con un grado de 2.11% de Equivalente de Cobre. El sitio del descubrimiento se encuentra a 8 millas al noroeste de la Eagle Nickel Mine, la única mina de níquel operativa en EE. UU. El objetivo fue identificado a través de prospección de campo y técnicas geofísicas, rastreando los bloques mineralizados hasta su fuente. Este descubrimiento es parte del acuerdo de opción de Talon con UPX Minerals para adquirir hasta un 80% de interés en aproximadamente 400,000 acres de derechos minerales en Michigan.
탈론 메탈스는 미시간 주 상반도(Boulderdash 타겟)에서 중요한 구리-니켈 발견을 하였습니다. 첫 번째 시추공은 깊이 9.14미터에서 시작하여 99.92미터의 광물화를 관찰하였으며, 이 중 48.00미터는 구리 동등 등급 2.11%를 기록하였습니다. 발견지는 미국에서 유일하게 운영 중인 니켈 광산인 이글 니켈 광산에서 북서쪽으로 8마일 떨어진 곳에 위치하고 있습니다. 이 타겟은 현장 탐사 및 지구물리학적 기법을 통해 광물화된 바위의 출처를 추적하여 식별되었습니다. 이번 발견은 탈론이 UPX 미네랄스와 체결한 옵션 계약의 일환으로, 미시간 주의 약 400,000 에이커의 광물권 중 최대 80%의 소유 지분을 인수할 수 있게 됩니다.
Talon Metals a réalisé une découverte significative de cuivre-nickel sur son cible Boulderdash dans la péninsule supérieure du Michigan. Le premier trou de forage a intercepté 99,92 mètres de minéralisation à partir d'une profondeur de seulement 9,14 mètres, y compris 48,00 mètres présentant un grade de 2,11% d'équivalent cuivre. Le site de découverte est situé à 8 miles au nord-ouest de la mine de nickel d'Eagle, la seule mine de nickel en activité aux États-Unis. L'objectif a été identifié grâce à la prospection sur le terrain et aux techniques géophysiques, retraçant les blocs minéralisés jusqu'à leur source. Cette découverte fait partie de l'accord d'option de Talon avec UPX Minerals pour acquérir jusqu'à 80 % d'intérêt de propriété sur environ 400 000 acres de droits miniers dans le Michigan.
Talon Metals hat eine bedeutende Kupfer-Nickel-Entdeckung an seinem Boulderdash-Ziel in der oberen Halbinsel von Michigan gemacht. Das erste Bohrloch traf auf 99,92 Meter Mineralisierung, die in nur 9,14 Metern Tiefe begann, einschließlich 48,00 Metern mit einem Gehalt von 2,11% Kupferäquivalent. Der Entdeckungsstandort befindet sich 8 Meilen nordwestlich der Eagle Nickel Mine, der einzigen funktionierenden Nickelmine in den USA. Das Ziel wurde durch Feldprospektion und geophysikalische Techniken identifiziert, die mineralisierte Blöcke bis zu ihrer Quelle zurückverfolgten. Diese Entdeckung ist Teil des Optionsvertrags von Talon mit UPX Minerals, um bis zu 80% Eigenanteil an etwa 400.000 Acres von Mineralrechten in Michigan zu erwerben.
- Discovery of significant copper-nickel mineralization in first drill hole
- Shallow depth of mineralization starting at just 9.14 meters
- High-grade intercept of 48 meters grading 2.11% Copper Equivalent
- Strategic location near existing Eagle Nickel Mine
- Large land package of 400,000 acres with exploration potential
- True widths of mineralization cannot be calculated yet due to unknown geometry
- Additional drilling required to determine economic viability
Maiden Hole Intercepts 99.92 Meters Grading
Tamarack, Minnesota--(Newsfile Corp. - October 24, 2024) - Talon Metals Corp. (TSX: TLO) (OTC Pink: TLOFF) ("Talon" or the "Company") in-house exploration drilling and geophysics team has discovered 99.92 meters of copper and nickel mineralization on its maiden drill hole at the Boulderdash target in the Upper Peninsula of Michigan. This discovery marks a major milestone in the ongoing exploration efforts in Michigan as part of Talon's 2024 exploration plan.
Figure 1: Mineralized core from the first hole drilled at Boulderdash in Michigan (at 32 meters depth)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2443/227630_e29a4938543ad86f_001full.jpg
HIGHLIGHTS
- Shallow and High-Grade Mineralization: Talon's first drill hole into the Boulderdash target encountered 99.92 meters of mineralized bedrock starting at just 9.14 meters depth. Within this intercept is 48.00 meters grading
2.11% Copper Equivalent ("CuEq") or0.83% Nickel Equivalent ("NiEq").
| Drill Hole | From | To | Length | Assay | NiEq (%) | CuEq (%) | |||||
| (#) | (m) | (m) | (m) | Ni (%) | Cu (%) | Co (%) | Pd (g/t) | Pt (g/t) | Au (g/t) | ||
| 24BD0001 | 9.14 | 109.06 | 99.92 | 0.41 | 0.35 | 0.02 | 0.05 | 0.09 | 0.04 | 0.63 | 1.60 |
| including | 9.14 | 57.14 | 48.00 | 0.53 | 0.50 | 0.03 | 0.07 | 0.11 | 0.05 | 0.83 | 2.11 |
| including | 32 | 36.07 | 4.07 | 1.28 | 1.00 | 0.05 | 0.14 | 0.22 | 0.07 | 1.89 | 4.78 |
| including | 84.66 | 102.45 | 17.79 | 0.45 | 0.30 | 0.02 | 0.05 | 0.11 | 0.04 | 0.67 | 1.69 |
Table 1: Assay Results from Drill Hole 24BD0001
- Discovery Through Prospecting: The Boulderdash target was identified through field prospecting, which traced mineralized boulders back to their source based on glacial ice direction and a corresponding magnetic anomaly.
- Proximity to Existing Nickel Mine: The target is situated just 8 miles northwest of the Eagle Nickel Mine, currently the only operating nickel mine in the U.S., owned by Lundin Mining.
"This discovery is the result of both traditional mineral exploration practices and novel approaches to geophysics. We identified mineralized boulders at the surface while prospecting and followed the trail of boulders back to where they vanished. Then, using modern geophysical tools, we identified an anomaly, and the first drill hole hit mineralization right out of the box," said Dean Rossell, Chief Exploration Geologist for Talon. He added, "The distribution and abundance of magmatic sulfides intersected in the initial drilling at Boulderdash bear a striking resemblance to the early drill results from the Eagle deposit. In 2001, one of the first drill holes intersected a long interval of disseminated with minor net-textured sulfides which provided some of the inspiration to drill the discovery hole in 2002 which intersected 84.2m of high-grade massive sulphide mineralization." Rossell is credited with the discovery of the Eagle Deposit.
"The recent breakthrough at Boulderdash underscores the value of Talon's in-house geology, geophysics, and drilling teams in advancing exploration in Michigan," said Henri van Rooyen, CEO of Talon. He continued, "US leaders are laser focused on US dependency on critical minerals produced by foreign entities of concern. Discovery of a potential new domestic resource of copper and nickel is very timely."
HISTORY OF BOULDERDASH
The Boulderdash target, part of the Ni-Cu mineralized boulder trains in the Baraga Basin, has shown encouraging results with mineralized boulders but the source of the boulders had previously been a mystery. By combining geophysical techniques with surface prospecting, Talon was able to identify a drill target and confirm the source of mineralization with the first drill hole.
In 2022, Talon entered into an option and earn-in agreement with UPX Minerals Inc. (a wholly-owned subsidiary of Sweetwater Royalties) to acquire up to an
James Perry, President of Sweetwater Royalties, said of the positive drill results: "Talon continues to demonstrate their ability to identify and advance highly prospective targets of copper-nickel mineralization. Their highly experienced in-house capability in geology, drilling and geophysics make them the ideal partner to unlock the potential of our Michigan land package. We expect there is much more to come."
Figure 2: Map Showing Regional Location of Boulderdash Project and Roland Project
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2443/227630_e29a4938543ad86f_002full.jpg
NEXT STEPS
Talon's Boulderdash target will be followed by additional drill holes to further evaluate the mineralized system for additional mineralization and to understand the geometry of the system. The Company will also conduct borehole electromagnetic (EM) surveys to refine the understanding of the subsurface.
ROLAND TARGET UPDATE
In addition to the exciting discovery at Boulderdash, Talon continues to advance exploration efforts at the Roland Target, which was drilled earlier this year. Four (4) drill holes were completed, and an off-hole electromagnetic (EM) anomaly was identified, indicating the potential for nickel and copper mineralization. Talon plans to resume exploration at the Roland Target in the 2025 drill season to follow up on the anomaly and further evaluate the target's potential.
TRIBAL ENGAGEMENT
Talon is committed to meaningful engagement and information sharing with tribal sovereign government's proximate to its operations (see Talon's Tribal Engagement & Consultation Statement).
Upon obtaining the mineral rights to the historic land package in the Upper Peninsula of Michigan in 2023, Talon executives sought meetings with the proximate tribal sovereign government in the region, the Keweenaw Bay Indian Community ("KBIC").
Before any drilling was contemplated, Talon's executive team met with tribal leadership and the KBIC professional environmental team responsible for protecting the regional environment and band members treaty rights to hunt, fish and gather in the area outside the band's reservation boundaries. Talon has shared information with Band officials since the beginning of exploration in Michigan and sought tribal knowledge regarding the exploration program.
"Through early meetings and information sharing with KBIC officials and members, Talon has begun to better understand concerns about mineral exploration and the potential for mining in the area. We are grateful that the KBIC leadership and professional staff have shared tribal knowledge about the region's environment with us and been very clear about their concerns about the potential for mining in the region," said Cody Mayer, Talon's Michigan based Tribal and Community Liaison. Mayer added, "They have also indicated that they understand the need for the energy transition and recognized that clean energy and defense systems require critical minerals like nickel and copper. We understand that the first priority for KBIC is protecting the natural environment in the region. As our mineral exploration continues, Talon is committed to keeping KBIC fully apprised of developments. Should the results ultimately point to a mineable resource, Talon is committed to seeking a consultative process with KBIC that would cover environmental concerns and also potential for economic benefit sharing."
Talon most recently met with the KBIC Natural Resources Advisory Committee and hosted its second community meeting at the tribal casino in Baraga, MI earlier this month.
QUALITY ASSURANCE, QUALITY CONTROL AND QUALIFIED PERSON
Nickel, copper, and cobalt grades were first analyzed by a 4-acid digestion and ICP AES (ME-MS61). Grades reporting greater than
Lengths are drill intersections and not necessarily true widths. True widths cannot be calculated at this time due to the unknown geometry of the mineralization. Drill intersections have been independently selected by Talon. Drill composites have been independently calculated by Talon. The geological interpretations in this news release are solely those of the Company. The locations and distances highlighted on all maps in this news release are approximate.
Dr. Etienne Dinel, Vice President, Geology of Talon, is a Qualified Person within the meaning of NI 43-101. Dr. Dinel is satisfied that the analytical and testing procedures used are standard industry operating procedures and methodologies, and he has reviewed, approved and verified the technical information disclosed in this news release, including sampling, analytical and test data underlying the technical information.
Where used in this news release:
NiEq% = Ni% + Cu% x
CuEq% = Cu%+ Ni% x
ABOUT TALON
Talon is a TSX-listed base metals company in a joint venture with Rio Tinto on the high-grade Tamarack Nickel-Copper-Cobalt Project located in central Minnesota. Talon's shares are also traded in the US over the OTC market under the symbol TLOFF. The Tamarack Nickel Project comprises a large land position (18km of strike length) with additional high-grade intercepts outside the current resource area. Talon has an earn-in right to acquire up to
For additional information on Talon, please visit the Company's website at www.talonmetals.com or contact:
Media Contact:
Todd Malan
1 (202) 714-8187
malan@talonmetals.com
Investor Contact:
Sean Werger
1 (416) 500-9891
werger@talonmetals.com
FORWARD-LOOKING STATEMENTS
This news release contains certain "forward-looking statements". All statements, other than statements of historical fact that address activities, events or developments that the Company believes, expects or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements reflect the current expectations or beliefs of the Company based on information currently available to the Company. Such forward-looking statements include statements relating to future exploration, geophysics and drilling; geological interpretations; and the potential for a domestic resource. Forward-looking statements are subject to significant risks and uncertainties and other factors that could cause the actual results to differ materially from those discussed in the forward-looking statements, and even if such actual results are realized or substantially realized, there can be no assurance that they will have the expected consequences to, or effects on the Company.
Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Although the Company believes that the assumptions inherent in the forward-looking statements are reasonable, forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/227630
FAQ
What are the key findings from Talon Metals' (TLOFF) Boulderdash discovery in Michigan?
Where is Talon Metals' (TLOFF) Boulderdash target located?
What is the size of Talon Metals' (TLOFF) Michigan land package?
