Synopsys Extends DesignWare Security, Processor IP Solutions to Address Safety and Security Requirements of Automotive Designs

Rhea-AI Summary

Synopsys (Nasdaq: SNPS) launched the DesignWare tRoot Hardware Secure Module and ARC SEM130FS Safety and Security Processor IP solutions, designed to meet ASIL B and ASIL D compliance for automotive systems-on-chips (SoCs). These products feature enhanced security mechanisms to counteract malicious attacks and random hardware faults, critical for advanced driver-assistance systems (ADAS), telematics, and industrial SoCs. Availability is set for Q2 and Q3 2021, aiding designers in achieving ISO 26262 compliance and ensuring data protection in connected vehicles.

Positive

• Launch of ASIL B compliant tRoot HSM and ASIL D compliant ARC SEM130FS Processor enhances product offerings.
• Integrated safety features meet stringent automotive safety requirements, facilitating ISO 26262 certification.
• Expands Synopsys' market reach in the automotive sector addressing increasing security threats.

Negative

• None.

MOUNTAIN VIEW, Calif., April 14, 2021 /PRNewswire/ --

Highlights

• ASIL B compliant tRoot Hardware Secure Module for Automotive integrates Root of Trust security solution with hardware safety mechanisms to protect against both malicious attacks and random and systematic faults
• ASIL D compliant ARC SEM130FS Safety and Security Processor adds hardware redundancy to side-channel-attack protected processor to mitigate random hardware faults and avoid system failures
• Both DesignWare IP products meet stringent safety process and documentation requirements, targeting a broad range of applications for ADAS, telematics, radar, V2X communications, and industrial SoCs

Synopsys, Inc. (Nasdaq: SNPS) today announced the availability of its new DesignWare^® tRoot(TM) Hardware Secure Module (HSM) and ARC^® SEM130FS Safety and Security Processor IP solutions with integrated functional safety features to accelerate ISO 26262 certification of automotive systems-on-chips (SoCs). The ASIL B compliant tRoot HSM for Automotive adds hardware safety mechanisms for protection against permanent, transient and latent faults to its security system that includes an ARC processor, scalable side-channel resistant cryptography, true random number generator and security-enabled external memory controllers. The ASIL D compliant ARC SEM130FS Processor adds safety-critical hardware features such as dual-core lockstep to meet stringent automotive safety requirements. Both the ARC SEM130FS Processor and tRoot HSM for Automotive are supported by comprehensive safety documentation, including failure modes, effects and diagnostic analysis (FMEDA) reports that facilitate chip- and system-level ISO 26262 ASIL B or ASIL D compliance.

"Security attacks on safety-critical ADAS, telematics, radar, V2X communications, and industrial systems are on the rise, and designers need to find ways to implement advanced security while eliminating points of failure," said Wolfgang Ruf, product manager, semiconductors at SGS-TÜV Saar GmbH. "By extending its DesignWare tRoot HSM and ARC SEM Processor IP solutions to include functional safety mechanisms, Synopsys is enabling designers to more easily deliver SoCs that meet their customers' ASIL requirements and secure high-value data and communication from attacks."

The Synopsys DesignWare tRoot HSM with Root of Trust provides designers with a trusted execution environment (TEE) as part of a pre-integrated, pre-verified safety and security solution. The tRoot HSM for Automotive also incorporates safety mechanisms such as hardware redundancy, register error detection codes (EDC), memory error correction codes (ECC), watchdog timers and self-checking comparators for the entire system. In addition, the tRoot HSM for Automotive protects sensitive information and data processing in the connected car with features including secure boot, debug, firmware updates and key management.

The Synopsys DesignWare ARC SEM130FS Processor with Synopsys SecureShield^™ technology helps designers to protect safety-critical systems against software, hardware and side-channel attacks with ASIL D compliance covering both random hardware faults and systematic development flow. The processor offers integrated hardware safety features including dual-core lockstep, ECC for memories and interfaces, transient fault protection for internal registers, diagnostic error injection and an integrated self-checking safety monitor. The SEM130FS processor is supported by the certified ASIL D compliant ARC MetaWare Development Toolkit for Safety to ease the development, debugging and optimization of ISO 26262-compliant software. To help designers reach target ASILs, ARC FMEDA reports are available through the VC Functional Safety Manager, and the Z01X fault simulation solution offers a complete fault model set to meet ISO 26262 fault injection testing requirements.

"As security threats for connected vehicles grow, integrating the combination of safety and security features at the SoC level helps minimize the risk of malicious attacks and data breaches in automotive systems," said John Koeter, senior vice president of marketing and strategy for IP at Synopsys. "Synopsys' new ARC SEM130FS and tRoot HSM for Automotive integrate both specific hardware safety features and security features to enable designers to meet ISO 26262 requirements and protect vehicle sensitive data and communications."

Synopsys' broad DesignWare IP portfolio includes logic libraries, embedded memories, IOs, PVT sensors, embedded test, analog IP, interface IP, security IP, embedded processors and subsystems. To accelerate prototyping, software development and integration of IP into SoCs, Synopsys' IP Accelerated initiative offers IP prototyping kits, IP software development kits and IP subsystems. Extensive investment in IP quality and comprehensive technical support enable designers to reduce integration risk and accelerate time-to-market. For more information, please visit https://www.synopsys.com/designware.

Availability & Additional Resources

The DesignWare ARC SEM130FS Processor is scheduled to be available in Q2 2021 and DesignWare tRoot HSM for Automotive IP is scheduled to be available in Q3 2021.

• Learn about the DesignWare ARC Functional Safety Processors and DesignWare tRoot HSMs for Automotive

Assessment information:

• The ASIL B and ASIL D compliant ARC SEM130FS Processor is developed and assessed specifically to address ASIL B and ASIL D random hardware faults and ASIL D systematic faults.
• The ASIL B compliant tRoot HSM for Automotive is developed and assessed specifically for ASIL B random hardware faults and ASIL D systematic faults.
• The Certified ASIL D compliant ARC MetaWare Development Toolkit for Safety is certified as ASIL D Compliant according to ISO 26262-8 2018 as suitable for the development of safety related software up to ASIL D.

About Synopsys

Synopsys, Inc. (Nasdaq: SNPS) is the Silicon to Software™ partner for innovative companies developing the electronic products and software applications we rely on every day. As an S&P 500 company, Synopsys has a long history of being a global leader in electronic design automation (EDA) and semiconductor IP and offers the industry's broadest portfolio of application security testing tools and services. Whether you're a system-on-chip (SoC) designer creating advanced semiconductors, or a software developer writing more secure, high-quality code, Synopsys has the solutions needed to deliver innovative products. Learn more at www.synopsys.com. 

Editorial Contacts:
Simone Souza
Synopsys, Inc.
650-584-6454
simone@synopsys.com 

View original content:http://www.prnewswire.com/news-releases/synopsys-extends-designware-security-processor-ip-solutions-to-address-safety-and-security-requirements-of-automotive-designs-301268733.html

SOURCE Synopsys, Inc.

FAQ

What products did Synopsys announce on April 14, 2021?

Synopsys announced the DesignWare tRoot Hardware Secure Module and the ARC SEM130FS Safety and Security Processor IP solutions.

What compliance levels do Synopsys' new IP solutions meet?

The tRoot HSM meets ASIL B compliance, and the ARC SEM130FS Processor meets ASIL D compliance.

What are the key features of Synopsys' new automotive security solutions?

Key features include hardware safety mechanisms, dual-core lockstep, and enhanced protection against security threats.

When will the new DesignWare products be available?

The DesignWare ARC SEM130FS Processor is scheduled for Q2 2021, and the tRoot HSM for Automotive is scheduled for Q3 2021.

How do Synopsys' new products impact automotive design?

They enable designers to meet stringent safety and security requirements, crucial for advanced automotive applications.