Skeena Intersects 45.76 g/t Au over 5.60 metres at Snip Gold Project
Skeena Resources Limited (TSX:SKE)(OTCQX:SKREF) announces promising results from its 2020-2021 exploration drilling at the Snip gold project in British Columbia. The program, consisting of ten drill holes totaling 5,366 meters, aimed at resource expansion and found high-grade gold intersections, including 45.76 g/t Au over 5.60 m. New high-grade mineralization has been identified below the Twin Zone, with findings such as 29.52 g/t Au over 4.03 m. Additional new occurrences at 530 m depth indicate significant potential for expanding the existing resource.
- High-grade gold intersections reported, with up to 45.76 g/t Au over 5.60 m.
- Discovery of new high-grade, vein-hosted mineralization below the Twin Zone.
- New occurrences found 530 m below surface, opening areas for potential resource expansion.
- None.
VANCOUVER, BC / ACCESSWIRE / April 27, 2021 / Skeena Resources Limited (TSX:SKE)(OTCQX:SKREF) ("Skeena" or the "Company") is pleased to report diamond drill core results from the 2020-2021 campaign of exploration drilling at the Snip gold project ("Snip" or the "Project") located in the Golden Triangle of British Columbia. The exploratory program was focused upon resource expansion and delineating additional mineralization in previously unexplored areas of the near mine environment. The surface-based program was comprised of ten drill holes totaling 5,366 metres. Reference images are presented at the end of this release as well as on the Company's website.
Snip Drilling Highlights:
- 45.40 g/t Au over 0.50 m (S20-047)
- 45.76 g/t Au over 5.60 m (S20-049)
- 29.52 g/t Au over 4.03 m (S20-049)
- 37.78 g/t Au over 2.86 m (S20-049)
True widths range from 60
Additional Mineralization Established Below Twin Zone
Situated in the footwall sediments below the Twin Zone, two new occurrences of high-grade, vein-hosted gold mineralization have been discovered during the 2020-2021 exploration program. Drill hole S20-049 intersected a previously unidentified zone averaging 29.52 g/t Au over 4.03 m including 65.60 g/t Au over 1.14 m and 31.10 g/t Au over 1.03 m. The second zone occurs 20 m further downhole averaging 37.78 g/t Au over 2.86 m including 29.60 g/t Au over 1.32 m and 44.80 g/t Au over 1.54 m. These new intercepts occur in an area devoid of previous drilling and are open for expansion. The same drill hole also predictably intersected the known Twin Zone mineralization which graded 45.76 g/t Au over 5.60 m including 41.80 g/t Au over 0.90 m and 177.00 g/t Au over 1.16 m.
New Mineralization Discovered Below Current Resources
Exploratory drill hole S21-054 has intersected two new occurrences of footwall vein mineralization 530 m vertically below surface and 250 m downdip of existing resources averaging 5.82 g/t Au over 2.00 m and 12.40 g/t Au over 1.20 m. Due to the absence of any previous drilling in this new area, this discovery opens an entire area for potential resource expansion.
About Skeena
Skeena Resources Limited is a Canadian mining exploration company focused on revitalizing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling to advance Eskay Creek to full Feasibility by Q1 2022. Additionally, Skeena continues exploration programs at the past-producing Snip gold mine.
On behalf of the Board of Directors of Skeena Resources Limited,
Walter Coles Jr.
President & CEO
Contact Information
Investor Inquiries: info@skeenaresources.com
Office Phone: +1 604 684 8725
Company Website: www.skeenaresources.com
Qualified Persons
Exploration activities at Snip are administered on site by the Company's Exploration Managers, Raegan Markel, P.Geo. and John Tyler, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.
Quality Assurance - Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.
Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than
Cautionary Note Regarding Forward-Looking Statements
Certain statements made and information contained herein may constitute "forward-looking information" and "forward-looking statements" within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management's expectations. Forward-looking statements and information may be identified by such terms as "anticipates", "believes", "targets", "estimates", "plans", "expects", "may", "will", "could" or "would". Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.
Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.
Table 1: Snip 2020-2021 Drilling Campaign; Length-Weighted Drill Hole Gold Composites:
Hole-ID | From (m) | To (m) | Core Length (m) | Au (g/t) |
S20-045 | ABANDONED | |||
S20-046 | 265.90 | 267.07 | 1.17 | 1.04 |
S20-047 | 153.50 | 154.40 | 0.90 | 3.52 |
S20-047 | 190.70 | 191.20 | 0.50 | 45.40 |
S20-048 | 206.50 | 208.00 | 1.50 | 5.10 |
S20-049 | 214.74 | 220.34 | 5.60 | 45.76 |
Including | 214.74 | 215.64 | 0.90 | 41.80 |
and | 219.18 | 220.34 | 1.16 | 177.00 |
S20-049 | 277.00 | 281.03 | 4.03 | 29.52 |
Including | 277.86 | 279.00 | 1.14 | 65.60 |
and | 280.00 | 281.03 | 1.03 | 31.10 |
S20-049 | 299.00 | 301.86 | 2.86 | 37.78 |
Including | 299.00 | 300.32 | 1.32 | 29.60 |
and | 300.32 | 301.86 | 1.54 | 44.80 |
S20-049 | 363.00 | 364.00 | 1.00 | 3.27 |
S20-049 | 476.06 | 477.30 | 1.24 | 2.06 |
S20-050 | 44.35 | 45.25 | 0.90 | 8.03 |
S20-050 | 336.00 | 337.50 | 1.50 | 4.56 |
S20-051 | 493.15 | 493.65 | 0.50 | 2.31 |
S20-052 | 426.25 | 427.25 | 1.00 | 14.65 |
S20-052 | 452.25 | 452.75 | 0.50 | 2.89 |
S20-052 | 593.50 | 595.00 | 1.50 | 6.46 |
S20-053 | 349.00 | 350.50 | 1.50 | 2.36 |
S20-053 | 395.00 | 397.00 | 2.00 | 6.18 |
S20-053 | 399.00 | 400.00 | 1.00 | 3.55 |
S20-053 | 428.85 | 429.40 | 0.55 | 14.10 |
S20-053 | 434.05 | 435.50 | 1.45 | 2.09 |
S20-053 | 437.00 | 438.50 | 1.50 | 2.49 |
S20-053 | 502.28 | 504.17 | 1.89 | 9.99 |
Including | 502.28 | 503.00 | 0.72 | 22.10 |
S20-053 | 556.50 | 557.50 | 1.00 | 23.60 |
S20-053 | 564.00 | 565.50 | 1.50 | 4.01 |
S21-054 | 463.26 | 465.50 | 2.24 | 2.84 |
S21-054 | 467.13 | 467.89 | 0.76 | 17.10 |
S21-054 | 477.00 | 479.70 | 2.70 | 1.79 |
S21-054 | 539.00 | 540.00 | 1.00 | 2.80 |
S21-054 | 631.00 | 633.00 | 2.00 | 5.82 |
S21-054 | 659.30 | 660.50 | 1.20 | 12.40 |
True widths range from 60
Table 2: Mine Grid Drill Hole Locations and Orientations:
Hole-ID | Easting (m) | Northing (m) | Elevation (m) | Length (m) | Azimuth (°) | Dip (°) |
S20-045 | 4212.0 | 1971.8 | 282.0 | 36.0 | 0.0 | -75.0 |
S20-046 | 4212.0 | 1971.8 | 282.0 | 347.0 | 0.0 | -60.0 |
S20-047 | 4212.0 | 1971.8 | 282.0 | 341.0 | 0.0 | -45.0 |
S20-048 | 4212.0 | 1971.8 | 278.0 | 398.0 | 0.0 | -75.0 |
S20-049 | 4633.4 | 1880.6 | 521.0 | 519.0 | 0.0 | -60.0 |
S20-050 | 4633.4 | 1880.6 | 521.0 | 555.0 | 0.0 | -45.0 |
S20-051 | 4852.3 | 1783.2 | 724.0 | 852.0 | 0.0 | -70.0 |
S20-052 | 4852.3 | 1783.2 | 724.0 | 777.0 | 0.0 | -47.0 |
S20-053 | 4852.3 | 1783.2 | 724.0 | 717.0 | 0.0 | -53.0 |
S21-054 | 4852.0 |
{
"@context": "https://schema.org",
"@type": "FAQPage",
"name": "Skeena Intersects 45.76 g/t Au over 5.60 metres at Snip Gold Project FAQs",
"mainEntity": [
{
"@type": "Question",
"name": "What are the latest drill results for Skeena Resources at the Snip project?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Skeena Resources reported high-grade intersections including 45.76 g/t Au over 5.60 m from its recent exploration drilling."
}
},
{
"@type": "Question",
"name": "How many drill holes were completed in the 2020-2021 Snip gold project exploration?",
"acceptedAnswer": {
"@type": "Answer",
"text": "The exploration program consisted of ten drill holes totaling 5,366 meters."
}
},
{
"@type": "Question",
"name": "What new mineralization was discovered during Skeena Resources' recent drilling?",
"acceptedAnswer": {
"@type": "Answer",
"text": "New high-grade vein mineralization was discovered below the Twin Zone, averaging 29.52 g/t Au over 4.03 m."
}
},
{
"@type": "Question",
"name": "What is the stock symbol for Skeena Resources Limited?",
"acceptedAnswer": {
"@type": "Answer",
"text": "The stock symbol for Skeena Resources is SKREF."
}
}
]
}
FAQ
What are the latest drill results for Skeena Resources at the Snip project?
Skeena Resources reported high-grade intersections including 45.76 g/t Au over 5.60 m from its recent exploration drilling.
How many drill holes were completed in the 2020-2021 Snip gold project exploration?
The exploration program consisted of ten drill holes totaling 5,366 meters.
What new mineralization was discovered during Skeena Resources' recent drilling?
New high-grade vein mineralization was discovered below the Twin Zone, averaging 29.52 g/t Au over 4.03 m.
What is the stock symbol for Skeena Resources Limited?
The stock symbol for Skeena Resources is SKREF.
SKREF
OTC:SKREFSKREF RankingsSKREF Latest NewsOct 27, 2021
Skeena to Commence Trading on the NYSE
Sep 17, 2021
Skeena Closes C$7 Million Flow-Through Financing
SKREF Stock Data |