PJX Resources Discovers Sullivan Style Massive Sulphide Mineralization With Grades up to 9.33% Zinc, 2.48% Lead, and 14.62 g/t Silver

Rhea-AI Summary

PJX Resources Inc. announces discovery of massive sulphide boulders with zinc, lead, silver, cadmium, and indium mineralization in British Columbia

Positive

• Significant new discovery of zinc, lead, silver, cadmium, and indium mineralization
• Boulders with good grades similar to ore at the Sullivan deposit
• Potential for a second Sullivan type deposit
• Target area with deposit potential defined by elevated magnetic signature

Negative

• None.

TORONTO, ON / ACCESSWIRE / October 12, 2023 / PJX Resources Inc. ("PJX" or "the Company") is pleased to announce the discovery of massive and semi-massive sulphide boulders of Sullivan deposit style zinc, lead, silver, cadmium, and indium mineralization. This significant new sediment-hosted discovery is on the Company's Dewdney Trail Property in the Sullivan Minng District in southeastern British Columbia, Canada.

PJX's prospecting team discovered boulders with sulphide mineralization in an area about 50 metres (m) by 150 m at the base of a talus slope. Ten samples have been analyzed with grades shown in the table below.

	Zinc	Lead	Silver	Copper	Gold	Cadmium	Cobalt	Indium	Sulphur	Iron
Sample ID	%	%	ppm	ppm	ppm	ppm	ppm	ppm	%	%
STM-23-1	6.71	2.23	16.05	1258.9	0.075	138.73	70.1	6.850	12.16	14.16
STM-23-2	7.68	1.70	14.39	1119.0	0.081	159.49	119.6	7.770	12.35	12.71
STM-23-3	1.36	0.92	6.60	200.7	0.029	29.54	41.5	1.644	4.17	7.47
STM-23-4	5.18	1.54	9.28	354.8	0.150	113.27	74.1	5.634	9.73	12.32
STM-23-5	9.25	2.89	17.79	995.3	0.065	186.41	87.7	9.077	15.58	16.90
STM-23-6	6.72	1.63	10.17	402.2	0.047	139.41	78.8	6.805	14.06	16.64
STM-23-7	9.33	2.48	14.62	495.0	0.121	191.62	83.8	9.324	15.01	15.35
STM-23-8	3.55	0.98	7.50	442.1	0.055	69.22	59.8	3.665	6.47	8.73
STM-23-9	4.00	1.22	8.15	441.4	0.060	78.86	59.3	4.203	8.67	11.01
STM-23-10	8.87	2.48	16.43	494.9	0.096	178.27	90.0	9.087	13.49	13.05
MSA Labs Analytical Methods	IMS-230 ICF-6Zn	IMS-230 ICF-6Pb	IMS-230	IMS-230	FAS-111	IMS-230	IMS-230	IMS-230	IMS-230 SPM-210	IMS-230

Some sulphide boulders display layering and breccia textures with grades of zinc-lead-silver mineralization similar to ore at the Sullivan deposit (see photos below).

Dave Pighin, PJX Resources' consulting geologist comments: "In my 60 years of exploring for Cominco and others in the Sullivan Mining District, this is the first time that this style of mineralization with such good grades have been discovered outside the Sullivan Mine basin that is located about 25 km to the west."

The sulphide boulders with zinc (sphalerite mineral), lead (galena), and iron (pyrite and pyrrhotite) are magnetic. The boulders occur at the base of the mountain slope and on the edge of a large magnetic anomaly identified by Expert Geophysics from the 875 line-kilometre airborne geophysical survey flown for PJX in 2021 (see map below).

John Keating, President of PJX commented: "The discovery of these boulders with this style of mineralization and grades similar to ore at the Sullivan may be the most compelling evidence in 130 years since the Sullivan deposit was discovered of a potential second Sullivan type deposit. Our geological, geochemical, and geophysical work on the Dewdney Trail Property support the potential to discover a significant deposit."

"We would like to thank the Kennedy family of prospectors and our geologists for their great work. Boots on the ground and breaking rocks resulted in this new discovery. We are continuing to prospect and map the area to identify additional boulders of mineralization and to locate bedrock sources of the mineralization. Additional information will be announced as it becomes available."

Sample SMT-23-1 (6.71% zinc, 2.23% lead, 16.05 g/t silver, 1258.9 ppm or 0.12% copper)

Although this sample is lower in grade it tells an important story. The individual massive sphalerite fragments are a possible indicator of higher grade zinc rich massive sulphides possibly buried under the talus slope.

Sample SMT-23-8 (3.55% zinc, 0.98% lead, 7.5 g/t silver, 442.1 ppm or 0.04% copper)

Although this sample is lower in grade it tells an important story. The individual massive sphalerite fragments are a possible indicator of higher grade zinc rich massive sulphides possibly buried under the talus slope.

Sample SMT-23-7 (9.33% zinc, 2.48% lead, 14.62 g/t silver, 495 ppm or 0.04% copper)

Alternating dark and light coloured bands with sulphides (zinc, lead, iron) appear to be sulphide-rich beds that have been broken apart possibly by slumping during deposition on the ocean floor, or the beds may have broken apart during later folding.

Airborne Magnetic Map

Massive sulphide boulders occur downslope from a magnetic anomaly (red to pink area). The boulders are magnetic. The initial target area with deposit potential is defined by an elevated magnetic signature that is over 1.5 km along strike. Stronger magnetic anomalies (pink colour) may represent more iron rich (pyrrhotite mineral) zones similar to those that occur at the Sullivan deposit. Less strong magnetic anomalies (red to orange colour) may represent areas with more zinc or lead sulphide mineralization that would be more weakly magnetic.

The 160 million tonne Sullivan deposit produced ore containing some 17 million tonnes of zinc and lead metal and more than 285 million ounces of silver during 90 years of operation before closing in 2001.

Qualified Persons
The geological disclosure and content of this news release has been reviewed and approved by Dave Pighin, P.Geo., and John Keating P.Geo. (qualified persons for the purpose of National Instrument 43-101 Standards of Disclosure for Mineral Projects). Mr. Pighin is a consulting geologist for PJX on base metal targets. Mr. Keating is the President, Chief Executive Officer and a Director of PJX.

Technical information for the Dewdney Trail exploration program is obtained and reported under a formal quality assurance and quality control ("QA/QC") program. The samples were cut with a diamond saw under the direction of qualified geologists. Samples were then labeled, placed in plastic bags, sealed and with sample numbers recorded. Samples were delivered by the Company to MSALabs in Langley, British Columbia. Blanks, standards and duplicates were done in accordance with industry standards. Analyses, including overlimits, were performed in accordance with MSAlabs' analytical methods reported in the table.

About PJX Resources Inc.
PJX is a mineral exploration company focused on building shareholder value and community opportunity through the exploration and development of mineral resources with a focus on gold, silver and base metals (zinc, lead, copper, nickel). PJX's properties are located in the historical Sullivan Mine District and Vulcan Gold Belt near Cranbrook and Kimberley, British Columbia.

Please refer to our web site http://www.pjxresources.com for additional information.

FOR ADDITIONAL INFORMATION PLEASE CONTACT:
Linda Brennan, Chief Financial Officer
(416) 799-9205
info@pjxresources.com

Cautionary Note Regarding Forward-Looking Information
The information in this news release has been prepared as at the date noted above. Certain statements in this news release, referred to herein as "forward-looking statements", constitute "forward-looking statements" under the provisions of Canadian provincial securities laws. These statements can be identified by the use of words such as "expected", "may", "will" or similar terms.

Forward-looking statements are necessarily based upon a number of factors and assumptions that, while considered reasonable by PJX Resources Inc. as of the date of such statements, are inherently subject to significant business, economic and competitive uncertainties and contingencies. Many factors, known and unknown, could cause actual results to be materially different from those expressed or implied by such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date made. Except as otherwise required by law, PJX Resources Inc. expressly disclaims any obligation or undertaking to release publicly any updates or revisions to any such statements to reflect any change in PJX Resources Inc.'s expectations or any change in events, conditions or circumstances on which any such statement is based.

Cautionary Note to US Investors:
This news release may contain information about adjacent properties on which PJX Resources Inc. has no right to explore or mine. We advise U.S. investors that the SEC's mining guidelines strictly prohibit information of this type in documents filed with the SEC. U.S. investors are cautioned that mineral deposits on adjacent properties are not indicative of mineral deposits on our properties. This news release may contain forward-looking statements including but not limited to comments regarding the timing and content of upcoming work programs, geological interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such statements.

This press release uses the terms "Measured", "Indicated", and "Inferred" resources. United States investors are advised that while such terms are recognized and required by Canadian regulations, the United States Securities and Exchange Commission does not recognize them. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or other economic studies. United States investors are cautioned not to assume that all or any part of Measured or Indicated Mineral Resources will ever be converted into Mineral Reserves. United States investors are also cautioned not to assume that all or any part of a Mineral Resource is economically or legally mineable.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: PJX Resources Inc.

View source version on accesswire.com:
https://www.accesswire.com/792174/pjx-resources-discovers-sullivan-style-massive-sulphide-mineralization-with-grades-up-to-933-zinc-248-lead-and-1462-gt-silver

FAQ

What did PJX Resources discover?

PJX Resources discovered massive sulphide boulders with zinc, lead, silver, cadmium, and indium mineralization.

Where was the discovery made?

The discovery was made on PJX Resources' Dewdney Trail Property in the Sullivan Mining District in British Columbia, Canada.

What are the grades of the discovered boulders?

The discovered boulders have grades of zinc, lead, and silver similar to ore at the Sullivan deposit.

What is the potential of the discovery?

The discovery suggests the potential for a second Sullivan type deposit.

How was the discovery made?

The discovery was made by PJX Resources' prospecting team who found boulders with sulphide mineralization at the base of a talus slope.

What is the significance of the magnetic anomaly?

The magnetic anomaly indicates the presence of potential iron-rich zones and areas with zinc or lead sulphide mineralization.

Who reviewed and approved the geological disclosure?

The geological disclosure was reviewed and approved by Dave Pighin and John Keating, qualified persons for the purpose of National Instrument 43-101 Standards of Disclosure for Mineral Projects.

What is the historical production of the Sullivan deposit?

The Sullivan deposit produced ore containing 17 million tonnes of zinc and lead metal and over 285 million ounces of silver during its 90 years of operation.

What is the technical information for the exploration program?

The technical information for the Dewdney Trail exploration program is obtained and reported under a formal quality assurance and quality control program.