Nucor to Build Rebar Micro Mill in the South Atlantic Region
Nucor Corporation (NYSE: NUE) announced the approval for a new rebar micro mill in the South Atlantic, marking its third facility of this kind. With a budget of $350 million and an annual capacity of 430,000 tons, the new mill aims to meet increasing rebar demand, particularly following the infrastructure spending bill. The company currently operates two other micro mills in Missouri and Florida, which opened in 2020. Nucor’s bar steel production capacity stands at approximately 9.5 million tons per year, serving various end markets across the U.S.
- Approval for new rebar micro mill in the South Atlantic, enhancing production capacity.
- Budget of $350 million reflects strong investment in growth.
- Annual capacity of 430,000 tons to meet increased demand.
- Strategically expanding in response to infrastructure spending.
- Potential competitive pressure from imports and substitute materials.
- Market demand uncertainty linked to economic fluctuations and construction activity.
CHARLOTTE, N.C., Dec. 6, 2021 /PRNewswire/ -- Nucor Corporation (NYSE: NUE) announced today that the Company's board of directors has approved the construction of a rebar micro mill, with spooling capabilities, to be located in the South Atlantic region. This will be Nucor's third rebar micro mill, joining its existing micro mills in Missouri and Florida, both of which began operations in 2020. The budgeted capex for the new micro mill is
"We have recently executed two successful rebar micro mill start-ups and believe the East Coast market will be in need of additional rebar supply in the coming years, particularly with the recent passage of the infrastructure spending bill," said Leon Topalian, President & Chief Executive Officer of Nucor. "Rebar has been a core business for Nucor since we got into steelmaking and this project will enable us to maintain our leadership position in the rebar market."
Rebar is used primarily in the construction of roads, buildings, sidewalks and other structures. Due to the variety of its end uses, rebar has had resilient demand characteristics over the last 20 years. The rebar market is expected to show continued strength. Most of the rebar used in the U.S. is produced domestically, and rebar imports have decreased in recent years due to strong trade enforcement.
Nucor has 15 bar mills strategically located across the United States that manufacture a broad range of steel products, including concrete reinforcing bars, hot-rolled bars, rounds, light shapes, structural angles, channels, wire rod and highway products in carbon and alloy steels. Four of the bar mills have a significant focus on manufacturing SBQ and wire rod products. Steel produced by Nucor bar mills serves numerous end markets, including the agricultural, automotive, construction, energy, furniture, machinery, metal building, railroad, recreational equipment, shipbuilding, heavy truck and trailer market segments. Nucor's bar steel production capacity is estimated at approximately 9.5 million tons per year.
About Nucor
Nucor and its affiliates are manufacturers of steel and steel products, with operating facilities in the United States, Canada and Mexico. Products produced include: carbon and alloy steel -- in bars, beams, sheet and plate; hollow structural section tubing; electrical conduit; steel racking; steel piling; steel joists and joist girders; steel deck; fabricated concrete reinforcing steel; cold finished steel; precision castings; steel fasteners; metal building systems; insulated metal panels; steel grating; and wire and wire mesh. Nucor, through The David J. Joseph Company, also brokers ferrous and nonferrous metals, pig iron and hot briquetted iron / direct reduced iron; supplies ferro-alloys; and processes ferrous and nonferrous scrap. Nucor is North America's largest recycler.
Forward-Looking Statements
Certain statements contained in this news release are "forward-looking statements" that involve risks and uncertainties. The words "anticipate," "believe," "expect," "intend," "project," "may," "will," "should," "could" and similar expressions are intended to identify those forward-looking statements. These forward-looking statements reflect the Company's best judgment based on current information, and, although we base these statements on circumstances that we believe to be reasonable when made, there can be no assurance that future events will not affect the accuracy of such forward-looking information. As such, the forward-looking statements are not guarantees of future performance, and actual results may vary materially from the projected results and expectations discussed in this news release. Factors that might cause the Company's actual results to differ materially from those anticipated in forward-looking statements include, but are not limited to: (1) competitive pressure on sales and pricing, including pressure from imports and substitute materials; (2) U.S. and foreign trade policies affecting steel imports or exports; (3) the sensitivity of the results of our operations to prevailing market steel prices and changes in the supply and cost of raw materials, including pig iron, iron ore and scrap steel; (4) the availability and cost of electricity and natural gas, which could negatively affect our cost of steel production or result in a delay or cancellation of existing or future drilling within our natural gas drilling programs; (5) critical equipment failures and business interruptions; (6) market demand for steel products, which, in the case of many of our products, is driven by the level of nonresidential construction activity in the United States; (7) impairment in the recorded value of inventory, equity investments, fixed assets, goodwill or other long-lived assets; (8) uncertainties surrounding the global economy, including excess world capacity for steel production; (9) fluctuations in currency conversion rates; (10) significant changes in laws or government regulations affecting environmental compliance, including legislation and regulations that result in greater regulation of greenhouse gas emissions that could increase our energy costs, capital expenditures and operating costs or cause one or more of our permits to be revoked or make it more difficult to obtain permit modifications; (11) the cyclical nature of the steel industry; (12) capital investments and their impact on our performance; (13) our safety performance; and (14) the impact of the COVID-19 pandemic and any variants of the virus. These and other factors are discussed in Nucor's regulatory filings with the Securities and Exchange Commission, including those in "Item 1A. Risk Factors" of Nucor's Annual Report on Form 10-K for the year ended December 31, 2020. The forward-looking statements contained in this news release speak only as of this date, and Nucor does not assume any obligation to update them, except as may be required by applicable law.
View original content:https://www.prnewswire.com/news-releases/nucor-to-build-rebar-micro-mill-in-the-south-atlantic-region-301437869.html
SOURCE Nucor Corporation
FAQ
What is Nucor Corporation's recent announcement regarding NUE?
What is the capacity of Nucor's new rebar micro mill?
How many rebar micro mills does Nucor operate?
Why is Nucor expanding its rebar production?
What is Nucor's total bar steel production capacity?
