NEO Battery Showcases Mass-Producible Silicon Battery Prototype with Highest Capacity Retention Achieved to Date
NEO Battery Materials (NBMFF) has unveiled NBMSiDE® P-300N, an advanced silicon anode prototype achieving the highest capacity retention to date. The product demonstrates an average Coulombic Efficiency of over 99.8% in half-cell testing using 100% pure silicon anode.
Two variations of P-300N have been developed: a High-Capacity Variant showing initial capacity over 2,000 mAh/g with 99.5% CE, and a High-Stability Variant balancing cycle performance and capacity with 99.8% CE at approximately 2,000 mAh/g initial capacity.
The company is currently conducting long-term full cell tests of 300+ cycles and plans to manufacture near-commercial battery cells with 3 to 5 Ah capacities alongside global battery value chain players. The P-300N is designed for mass production compatibility without requiring modifications to existing processing equipment.
NEO Battery Materials (NBMFF) ha presentato il prototipo di anodo in silicio avanzato NBMSiDE® P-300N, che raggiunge la massima capacità di ritenzione mai registrata. Il prodotto dimostra un'efficienza coulombica media superiore al 99,8% nei test su celle a metà utilizzando anodi in silicio puro al 100%.
Due varianti del P-300N sono state sviluppate: una Variante ad Alta Capacità che mostra una capacità iniziale superiore a 2.000 mAh/g con un'efficienza del 99,5%, e una Variante ad Alta Stabilità che bilancia le prestazioni del ciclo e la capacità con un'efficienza del 99,8% a una capacità iniziale di circa 2.000 mAh/g.
L'azienda sta attualmente conducendo test a lungo termine su celle complete per oltre 300 cicli e prevede di produrre celle per batterie quasi commerciali con capacità di 3-5 Ah insieme ad attori globali della catena del valore delle batterie. Il P-300N è progettato per essere compatibile con la produzione di massa senza necessitare di modifiche alle attrezzature di lavorazione esistenti.
NEO Battery Materials (NBMFF) ha revelado el prototipo de ánodo de silicio avanzado NBMSiDE® P-300N, que alcanza la mayor retención de capacidad hasta la fecha. El producto demuestra una eficiencia coulómbica promedio de más del 99.8% en pruebas de celda media utilizando un ánodo de silicio 100% puro.
Se han desarrollado dos variaciones del P-300N: una Variante de Alta Capacidad que muestra una capacidad inicial superior a 2,000 mAh/g con un 99.5% de eficiencia, y una Variante de Alta Estabilidad que equilibra el rendimiento del ciclo y la capacidad con un 99.8% de eficiencia a aproximadamente 2,000 mAh/g de capacidad inicial.
La empresa está realizando actualmente pruebas de celdas completas a largo plazo de más de 300 ciclos y planea fabricar celdas de batería casi comerciales con capacidades de 3 a 5 Ah junto a actores globales de la cadena de valor de baterías. El P-300N está diseñado para ser compatible con la producción en masa sin requerir modificaciones en el equipo de procesamiento existente.
NEO Battery Materials (NBMFF)는 현재까지 가장 높은 용량 유지율을 달성한 고급 실리콘 음극 프로토타입인 NBMSiDE® P-300N을 공개했습니다. 이 제품은 100% 순수 실리콘 음극을 사용하여 반셀 테스트에서 99.8% 이상의 평균 쿨롬 효율을 보여줍니다.
P-300N의 두 가지 변형이 개발되었습니다: 초기 용량이 2,000 mAh/g 이상이며 99.5%의 쿨롬 효율을 보이는 고용량 변형과, 초기 용량이 약 2,000 mAh/g에서 99.8%의 쿨롬 효율을 유지하며 사이클 성능과 용량을 균형 있게 조절하는 고안정성 변형입니다.
회사는 현재 300회 이상의 사이클을 대상으로 장기 전지 테스트를 진행 중이며, 3~5 Ah 용량의 상업적 배터리 셀을 글로벌 배터리 가치 사슬의 플레이어와 함께 제조할 계획입니다. P-300N은 기존 가공 장비에 대한 수정 없이 대량 생산 호환성을 위해 설계되었습니다.
NEO Battery Materials (NBMFF) a dévoilé le prototype d'anode en silicium avancé NBMSiDE® P-300N, atteignant la plus haute rétention de capacité à ce jour. Le produit démontre une efficacité coulombique moyenne de plus de 99,8 % lors des tests de demi-cellule utilisant une anode en silicium pur à 100 %.
Deux variations du P-300N ont été développées : une Variante Haute Capacité montrant une capacité initiale supérieure à 2 000 mAh/g avec 99,5 % d'efficacité, et une Variante Haute Stabilité équilibrant performance de cycle et capacité avec 99,8 % d'efficacité à une capacité initiale d'environ 2 000 mAh/g.
L'entreprise effectue actuellement des tests de cellules complètes à long terme de plus de 300 cycles et prévoit de fabriquer des cellules de batterie presque commerciales avec des capacités de 3 à 5 Ah aux côtés des acteurs mondiaux de la chaîne de valeur des batteries. Le P-300N est conçu pour être compatible avec la production de masse sans nécessiter de modifications des équipements de traitement existants.
NEO Battery Materials (NBMFF) hat das fortschrittliche Siliziumanoden-Prototyp NBMSiDE® P-300N vorgestellt, das die höchste bisher erreichte Kapazitätsretention erzielt. Das Produkt zeigt in Halbzellen-Tests mit 100% reinem Siliziumanoden eine durchschnittliche coulombische Effizienz von über 99,8%.
Es wurden zwei Variationen des P-300N entwickelt: eine Hochkapazitätsvariante, die eine Anfangskapazität von über 2.000 mAh/g mit 99,5% CE aufweist, und eine Hochstabilitätsvariante, die die Zyklusleistung und Kapazität mit 99,8% CE bei einer Anfangskapazität von etwa 2.000 mAh/g ausbalanciert.
Das Unternehmen führt derzeit Langzeit-Tests von Vollzellen mit über 300 Zyklen durch und plant, nahezu kommerzielle Batteriezellen mit Kapazitäten von 3 bis 5 Ah zusammen mit globalen Akteuren der Batteriewertschöpfungskette herzustellen. Der P-300N ist für die Massenproduktion geeignet, ohne dass Änderungen an bestehenden Verarbeitungseinrichtungen erforderlich sind.
- Achieved highest capacity retention to date with 99.8% Coulombic Efficiency
- Successfully developed two commercial variants for different market applications
- Product is ready for mass production without equipment modifications
- Demonstrates high initial capacity of over 2,000 mAh/g
- Long-term full cell test results still pending and not yet announced
- Commercial-scale production not yet initiated
- Technology still requires validation from global battery value chain players
TORONTO, March 18, 2025 (GLOBE NEWSWIRE) --
- NBMSiDE® P-300N: Advanced Prototype for Mass-Producibility Testing with Highest Capacity Retention Achieved to Date
- Average Coulombic Efficiency of Over
99.8% with High Initial Capacity While Maintaining Low-Cost Production - Two Variations of P-300N Launched for Different Industry Requirements
- Average Coulombic Efficiency of Over
- Undergoing Long-Term Battery Performance Testing with P-300N & High Capacity Retention Realized Over 300 Cycles
- Mass-Producibility Testing Conducted with P-300N
- Will Produce Near-Commercial Batteries with 3 to 5 Ah Capacities with Global Battery Value Chain Players
NEO Battery Materials Ltd. (“NEO” or the “Company”) (TSXV: NBM) (OTC: NBMFF), a low-cost silicon anode materials developer that enables longer-running, rapid-charging lithium-ion batteries, is pleased to introduce NBMSiDE® P-300N, an advanced silicon anode product with the highest capacity retention achieved to date. The P-300N is a mass-producible prototype optimized to enhance battery stability while maintaining low-cost production.
P-300N Silicon Anode: Highest Capacity Retention Achieved to Date
Building on the foundation of the P-300 silicon anode introduced in January, NBMSiDE® P-300N is the Company’s latest engineering feat with the highest capacity retention achieved to date. NEO’s R&D successfully refined the synthesis process and material characteristics while maintaining low costs and minimizing initial capacity loss.
NEO’s priority is optimizing the 50-cycle average Coulombic Efficiency1 (CE) on the half cell2 using a
Compared to predecessors, the P-300N has recorded the highest 50-cycle average CE of over
- High-Capacity Variant: Demonstrates initial capacity over 2,000 mAh/g with an average CE of over
99.5% and maintaining performance with 50+ cycles - High-Stability Variant: Provides a balance of cycle performance and capacity with an average CE of over
99.8% with approximately 2,000 mAh/g in initial capacity
P-300N is positioned as a low-cost, competitive solution for wide applications, including 1) electronics, power tools, or drone/UAV4 that require high capacity with ultra-fast charging/discharging and 2) EV and energy storage that require high capacity with long-term stability.
Next Steps: Full Cell Testing & Scaling Up for Commercialization
Due to surpassing half cell results, NEO is undergoing long-term full cell5 tests of 300+ cycles with the P-300N. With various cathode chemistries, P-300N is combined with graphite to form high-capacity silicon-graphite anodes6. High capacity retention has been realized, but once all internal targets are achieved, the Company will announce technical results through a subsequent news release.
With scale-up efforts initiated as of February, the P-300N will be the main product for mass-producibility testing. A key advantage of the P-300N is its adaptability to mass production without modifying existing processing equipment. After completing small-scale optimization, NEO plans to manufacture near-commercial battery cells with 3 to 5 Ah capacities with global battery value chain players.
P-300N: Technical Details of Optimization
The upgraded P-300N incorporates key refinements in particle size distribution, shape control, and composite layer coating on the silicon particle. The composite layer coating offers enhanced protection against the direct contact of the silicon anode and electrolyte, mitigating capacity loss and improving cycling life. Additionally, a reinforced polymer coating network aids in mechanical stress dissipation without compromising conductivity between silicon particle structures.
1Coulombic Efficiency (CE): Ratio of electrons transferred out from an electrode material/battery during discharging to the number transferred into the material during charging over a full charging cycle (Discharging Capacity-to-Charging Capacity). Ex. If the current discharging capacity is 2,000 mAh/g and the preceding charging capacity was 2,500 mAh/g, the Coulombic efficiency is
2Half Cell/5Full Cell: Lithium-ion battery comprises all four core materials (cathode, anode, separator, and electrolyte). Generally, battery anode materials proof-of-concept and optimization are completed with half cells. Only the anode, separator, and electrolyte are used with a lithium-metal counter electrode that may supply infinite lithium ions. Full cells have a limited number of lithium-ions, given that commercial-level cathode materials retain a limited supply of lithium ions compared to lithium-metal. Consequently, capacity retention is heavily affected by Coulombic efficiency at every charging cycle.
3Lithium-ion battery anode materials are either comprised solely of graphite or trace amounts of silicon (approximately 2 to
4UAV: Unmanned Aerial Vehicle
6Silicon-Graphite Anode: For commercial-level lithium-ion battery anodes, silicon anodes cannot wholly replace graphite anodes. Hence for certain batteries, silicon anodes and graphite anodes are mixed to form a blended anode called silicon-graphite anodes. On average, silicon anodes comprise approximately 5 to
About NEO Battery Materials Ltd.
NEO Battery Materials is a Canadian battery materials technology company focused on developing silicon anode materials for lithium-ion batteries in electric vehicles, electronics, and energy storage systems. With a patent-protected, low-cost manufacturing process, NEO Battery enables longer-running and ultra-fast charging batteries compared to existing state-of-the-art technologies. The Company aims to be a globally-leading producer of silicon anode materials for the electric vehicle and energy storage industries. For more information, please visit the Company’s website at: https://www.neobatterymaterials.com/.
On Behalf of the Board of Directors
Spencer Huh
Director, President, and CEO
For Investor Relations, PR & More Information:
info@neobatterymaterials.com
T: +1 (437) 451-7678
This news release includes certain forward-looking statements as well as management's objectives, strategies, beliefs and intentions. All information contained herein that is not clearly historical in nature may constitute forward-looking information. Generally, such forward-looking information can be identified notably by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: volatile stock prices; the general global markets and economic conditions; the possibility of write-downs and impairments; the risk associated with the research and development of advanced and battery-related technologies; the risk associated with the effectiveness and feasibility of technologies that have not yet been tested or proven on commercial scale; manufacturing process scale-up risks, including maintaining consistent material quality, production yields, and process reproducibility at a commercial scale; compatibility issues with existing battery chemistries and unforeseen the risks associated with entering into and maintaining collaborations, joint ventures, or partnerships with battery cell manufacturers, original equipment manufacturers, and various companies in the global battery supply chain; the risks associated with the construction, completion, and financing of commercial facilities including the Windsor and South Korean facilities; the risks associated with supply chain disruptions or cost fluctuations in raw materials, processing chemicals, and additive prices, impacting production costs and commercial viability; the risks associated with uninsurable risks arising during the course of research, development and production; competition faced by the Company in securing experienced personnel and financing; access to adequate infrastructure and resources to support battery materials research and development activities; the risks associated with changes in the technology regulatory regime governing the Company; the risks associated with the timely execution of the Company’s strategies and business plans; the risks associated with the lithium-ion battery industry’s demand and adoption of the Company’s silicon anode technology; market adoption and integration challenges, including the difficulty of incorporating silicon anodes within battery manufacturers and OEMs systems; the risks associated with the various environmental and political regulations the Company is subject to; risks related to regulatory and permitting delays; the reliance on key personnel; liquidity risks; the risk of litigation; risk management; and other risk factors as identified in the Company’s recent Financial Statements and MD&A and in recent securities filings for the Company which are available on www.sedarplus.ca. Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued R&D and commercialization activities, no material adverse change in precursor prices, development and commercialization plans to proceed in accordance with plans and such plans to achieve their stated expected outcomes, receipt of required regulatory approvals, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking information. Such forward-looking information has been provided for the purpose of assisting investors in understanding the Company's business, operations, research and development, and commercialization plans and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking information. Forward-looking information is made as of the date of this presentation, and the Company does not undertake to update such forward-looking information except in accordance with applicable securities laws.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
