Mawson’s Subsidiary SXG Drills 404 m @ 5.1 g/t Gold (Uncut) Traversing 13 High-Grade Veins 7 Intersections >100 g/t Gold, up to 2,670 g/t Gold Assays Pending on 100 m Step-Out Hole Intersecting Multiple Zones of Visible Gold
- None.
- None.
VANCOUVER, BC / ACCESSWIRE / September 5, 2023 / Mawson Gold Limited ("Mawson" or the "Company") (TSX:MAW)(Frankfurt:MXR)(OTC PINK:MWSNF) announces results from six drillholes (SDDSC068, 73-74, 76, 77B, 78) at the Sunday Creek Project in Victoria, Australia (Figure 1).
SDDSC077B drilled 404.4 m @ 5.6 g/t AuEq (5.1 g/t Au, 0.3 %Sb) from 374.0 m (uncut), and traverses 13 individual high-grade vein sets (Figures 3-6). Seven intervals have >100 g/t Au (up to 2,670 g/t Au), 20 intervals at >15 g/t Au and 20 intervals have >
SDDSC078 demonstrated the up-dip extension and continuation of five high grade zones towards the surface and SDDSC068 demonstrated the scale of the Sunday Creek system with a 500 m down-dip extension below prior drilling from the Apollo area.
Sunday Creek is
Highlights:
|
Noora Ahola, Mawson Interim CEO, states: "With the release of SDDSC077B, SXG's
"Along with recently reported holes SDDSC068 & 78, these holes confirm SXG's strategy to demonstrate grade, volume and scale at the project drilling both up and down dip of previously reported fantastic holes such as SDDSC050 and SDDSC066.
"SXG recently announced a planned 26,000 m drill campaign to April 2024 and is fully funded and permitted to execute on its strategy across its 11 km mineralized trend at Sunday Creek. It has a total of 24 holes that are pending release from both the main drill area and its regional targets up to 7,500 m to the northeast. We expect a steady stream of positive results to come out of Australia."
Results Discussion
Drill hole SDDSC077B 404.4 m @ 5.6 g/t AuEq (5.1 g/t Au,
SDDSC077B hole intersected 13 zones of mineralization from 375 m to 787 m down hole depth with visible gold noted in 28 individual restricted zones. SDDSC050 also traversed across the same 13 vein structures intersected in SDDSC077B with between 25 m to 60 m distance separating the two holes.
SDDSC077B drilled parallel to the host breccia dyke but at a high angle to the predominant NW high-grade mineralization trend, and therefore, the true thickness of the mineralized interval is interpreted to be approximately 60
Figure 4 shows the plan view of drill holes SDDSC050 and SDDSC070. Spatial separation of the holes is shown along their traces. The figure demonstrates the continuity of mineralized structures, especially in the dyke hanging wall, and shows the opportunity to extend the high grades into the dyke hanging wall.
Highlights from SDDSC077B include:
- 5.6 m @ 17.8 g/t AuEq (14.1 g/t Au,
2.4% Sb) from 392.2 m, including: - 0.2 m @ 31.5 g/t AuEq (31.4 g/t Au,
0.0% Sb) from 392.2 m - 0.4 m @ 231.6 g/t AuEq (182.0 g/t Au,
31.4% Sb) from 394.2 m - 5.4 m @ 39.3 g/t AuEq (38.0 g/t Au,
0.8% Sb) from 407.7 m, including: - 0.4 m @ 593.6 g/t AuEq (574.0 g/t Au,
12.4% Sb) from 407.7 m - 24.0 m @ 3.6 g/t AuEq (3.2 g/t Au,
0.2% Sb) from 417.0 m, including: - 1.5 m @ 43.1 g/t AuEq (39.7 g/t Au,
2.1% Sb) from 422.1 m - 0.4 m @ 24.0 g/t AuEq (17.3 g/t Au,
4.2% Sb) from 428.2 m - 4.9 m @ 36.1 g/t AuEq (20.1 g/t Au,
10.1% Sb) from 445.2 m, including: - 1.4 m @ 113.9 g/t AuEq (66.6 g/t Au,
29.9% Sb) from 445.2 m - 0.3 m @ 54.0 g/t AuEq (12.1 g/t Au,
26.5% Sb) from 449.7 m - 33.8 m @ 3.0 g/t AuEq (2.4 g/t Au,
0.4% Sb) from 478.0 m, including: - 1.2 m @ 11.9 g/t AuEq (10.8 g/t Au,
0.7% Sb) from 486.6 m - 0.5 m @ 21.0 g/t AuEq (20.9 g/t Au,
0.0% Sb) from 491.9 m - 1.0 m @ 19.6 g/t AuEq (10.1 g/t Au,
6.0% Sb) from 498.5 m - 0.2 m @ 183.2 g/t AuEq (168.0 g/t Au,
9.6% Sb) from 500.9 m - 0.3 m @ 6.1 g/t AuEq (5.5 g/t Au,
0.4% Sb) from 506.6 m - 6.5 m @ 10.2 g/t AuEq (2.8 g/t Au,
4.7% Sb) from 573.0 m, including: - 2.6 m @ 24.1 g/t AuEq (6.3 g/t Au,
11.3% Sb) from 574.0 m - 6.9 m @ 205.2 g/t AuEq (204.5 g/t Au,
0.4% Sb) from 733.8 m, including: - 1.1 m @ 9.8 g/t AuEq (9.5 g/t Au,
0.2% Sb) from 737.1 m - 0.8 m @ 1,741.5 g/t AuEq (1,736.4 g/t Au,
3.3% Sb) from 739.9 m - Including 0.4 m @ 731.2 g/t AuEq (731.0 g/t Au,
0.1% Sb) from 739.9 m - Including 0.4 m @ 2,679.8 g/t AuEq (2,670 g/t Au,
6.2% Sb) from 740.3 m
SDDSC078 was drilled 250 m up-dip SDDSC050 (305.8 m @ 2.4 g/t AuEq) and successfully targeted the high-grade core of mineralization at Rising Sun. Visible gold was noted in six individual restricted zones within SDDSC078. With the team's greater understanding of targeting grade, including definition of the Golden Orb Fault (Figure 3), SDDSC078 was able to be successfully targeted to intersect mineralization.
SDDSC068 was drilled 500 m down-dip of SDDSC066 (10.5 m @ 5.8 g/t AuEq, 7.8 m @ 5.4 g/t AuEq, and 10.4 m @ 22.4 g/t AuEq) and successfully targeted high-grades including 0.5 m @ 23.8 g/t Au from 1,010.4 m within a broader zone of mineralization including 13.3 m @ 1.6 g/t Au from 1,009.8 m at Apollo. Visible gold was noted.
For further information on holes SDDSC068, 73-74, 76, 78, please visit SXG's website at www.southerncrossgold.com.au.
Pending Results and Update
With four diamond drill rigs operating at site, SXG's plan is to drill an additional 26,000 m by April 2024, with 19,626 m drilled so far in 2023.
Demonstrating Volume: Eleven holes (SDDSC079-81, 83-90) are currently being geologically processed and chemically analyzed, with four holes (SDDSC082, 91-93) in drill progress (Figure 5).
Demonstrating Scale: Twelve holes (SDDTS001-7, SDDCN001 and SDDLV001-4) for 2,383 m (including two redrilled collars) have now been completed at the Leviathan - Consols - Tonstal regional area between 3,500 m to 7,500 m along strike from the main drill area. Results are expected in the coming weeks (Figure 2).
Demonstrating Grade: Preliminary visual geological logs of SDDSC082, drilled 100 m below hole SDDSC077B at Rising Sun intersected multiple zones of mineralization with visible gold noted in certain restricted zones. Assays are pending (Figures 5-6).
Further discussion and analysis of the Sunday Creek project by Southern Cross Gold is available on the SXG website at www.southerncrossgold.com.au.
Figures 1-6 show project location, plan, longitudinal and cross-sectional views of drill results reported here and Tables 1-3 provide collar and assay data. The true thickness of the mineralized intervals reported are interpreted to be approximately 60
Technical Background and Qualified Person
The Qualified Person, Michael Hudson, Executive Chairman and a director of Mawson Gold, and a Fellow of the Australasian Institute of Mining and Metallurgy, has reviewed, verified and approved the technical contents of this release.
Analytical samples are transported to the Bendigo facility of On Site Laboratory Services ("On Site") which operates under both an ISO 9001 and NATA quality systems. Samples were prepared and analyzed for gold using the fire assay technique (PE01S method; 25 gram charge), followed by measuring the gold in solution with flame AAS equipment. Samples for multi-element analysis (BM011 and over-range methods as required) use aqua regia digestion and ICP-MS analysis. The QA/QC program of Southern Cross Gold consists of the systematic insertion of certified standards of known gold content, blanks within interpreted mineralized rock and quarter core duplicates. In addition, On Site inserts blanks and standards into the analytical process.
MAW considers that both gold and antimony that are included in the gold equivalent calculation ("AuEq") have reasonable potential to be recovered at Sunday Creek, given current geochemical understanding, historic production statistics and geologically analogous mining operations. Historically, ore from Sunday Creek was treated onsite or shipped to the Costerfield mine, located 54 km to the northwest of the project, for processing during WW1. The Costerfield mine corridor, now owned by Mandalay Resources Ltd contains two million ounces of equivalent gold (Mandalay Q3 2021 Results), and in 2020 was the sixth highest-grade global underground mine and a top 5 global producer of antimony.
SXG considers that it is appropriate to adopt the same gold equivalent variables as Mandalay Resources Ltd in its Mandalay Technical Report, 2022 dated 25 March 2022. The gold equivalence formula used by Mandalay Resources was calculated using recoveries achieved at the Costerfield Property Brunswick Processing Plant during 2020, using a gold price of US
Based on the latest Costerfield calculation and given the similar geological styles and historic toll treatment of Sunday Creek mineralization at Costerfield, SXG considers that a 𝐴𝑢𝐸𝑞 = 𝐴𝑢 (𝑔/𝑡) + 1.58 × 𝑆𝑏 (%) is appropriate to use for the initial exploration targeting of gold-antimony mineralization at Sunday Creek.
For previously reported exploration results referenced in this news release, refer to the following:
December 1 | June 1, 2023 SDDSC066 |
About Mawson Gold Limited (TSX:MAW, FRANKFURT:MXR, OTCPINK:MWSNF)
Mawson Gold Limited is an exploration and development company. Mawson has distinguished itself as a leading Nordic exploration company with its
About Southern Cross Gold Ltd (ASX:SXG)
Southern Cross Gold holds the
On behalf of the Board, "Noora Ahola" Noora Ahola, Interim CEO | Further Information 1305 - 1090 West Georgia St., Vancouver, BC, V6E 3V7 Mariana Bermudez (Canada), Corporate Secretary |
Forward-Looking Statement
This news release contains forward-looking statements or forward-looking information within the meaning of applicable securities laws (collectively, "forward-looking statements"). All statements herein, other than statements of historical fact, are forward-looking statements. Although Mawson believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate, and similar expressions, or are those, which, by their nature, refer to future events. Mawson cautions investors that any forward-looking statements are not guarantees of future results or performance, and that actual results may differ materially from those in forward-looking statements as a result of various factors, including, Mawson's expectations regarding its ownership interest in Southern Cross Gold, capital and other costs varying significantly from estimates, changes in world metal markets, changes in equity markets, the potential impact of epidemics, pandemics or other public health crises, including the current pandemic known as COVID-19 on the Company's business, risks related to negative publicity with respect to the Company or the mining industry in general; exploration potential being conceptual in nature, there being insufficient exploration to define a mineral resource on the Australian-projects owned by SXG, and uncertainty if further exploration will result in the determination of a mineral resource; planned drill programs and results varying from expectations, delays in obtaining results, equipment failure, unexpected geological conditions, local community relations, dealings with non-governmental organizations, delays in operations due to permit grants, environmental and safety risks, and other risks and uncertainties disclosed under the heading "Risk Factors" in Mawson's most recent Annual Information Form filed on SEDAR. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, Mawson disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.
Photo 1: SDDSC077B from 739.9 m (0.8 m @ 1,741.5 g/t AuEq (1,736.4 g/t Au,
A 3D LiDAR scanned image of 20 cm of core from 739.9m can also be viewed here: https://magiscan.app/model/64c05072ee71b515fb1b0611.html.
Figure 1: Location of the Sunday Creek project, along with SXG's other Victoria projects and simplified geology.
Figure 2: Sunday Creek regional plan view showing LiDAR, soil sampling, structural framework, regional historic epizonal gold mining areas and broad regional areas tested by 12 holes for 2,383 m drill program. The regional drill areas are at Tonstal, Consols and Leviathan located 4,000-7,500 m along strike from the main drill area at Golden Dyke- Apollo.
Figure 3: Sunday Creek factual plan view showing SDDSC077B reported in this press release (grey box), selected prior reported drill holes and pending holes (yellow collar and trace). For location see Figure 2.
Figure 4: Sunday Creek unconstrained plan view showing SDDSC050 and SDDSC077B assays with other intersections also shown. Veins (red), dyke hanging wall surface relative to SDDSC077B and SDSSC050 (green) and hanging wall mineralized zone (from dyke hanging wall to dotted red line). The distance between SDDSC077B and SDSSC050 is shown along their traces. The RL at the start and end of holes is noted. For reference surface is approximately 300m RL. Of note is continuity of mineralized structures in the dyke hanging wall between SDDSC077B and SDSSC050. Host structure dips steeply to the north, veins dip steeply.
Figure 5: Sunday Creek longitudinal section across C-D the plane of the dyke breccia host looking towards the north showing mineralized veins sets. SDDSC077B reported here, with restricted visible gold intersections shown in SDDSC082 and prior reported drill holes shown.
Figure 6: Sunday Creek cropped cross section A-B (50 m influence) across the Rising Sun area looking towards 330 with mineralized veins sets, SDDSC077B and prior reported drill holes.
Table 1: Drill collar summary table for recent drillholes in progress.
Hole_ID | Depth (m) | Prospect | East GDA94_Z55 | North GDA94_Z55 | Elevation | Azimuth | Plunge |
SDDSC068 | 1041.2 | Apollo | 331254 | 5868098.6 | 353.9 | 211.3 | -77.7 |
SDDSC073 | 818.3 | Apollo | 331254 | 5868097 | 353.9 | 212.0 | -69.0 |
SDDSC077B | 834.2 | Rising Sun | 330478 | 5867882 | 289.0 | 73.3 | -62.2 |
SDDSC078 | 439.5 | Rising Sun | 330617 | 5867890 | 300.0 | 83.6 | -58.0 |
SDDSC079 | 700.7 | Rising Sun | 331254 | 5868098 | 353.7 | 210.0 | -65.0 |
SDDSC080 | 374.6 | Rising Sun | 330754 | 5868022 | 294.3 | 185.0 | -71.0 |
SDDSC081 | 338.5 | Rising Sun | 330754 | 5868022 | 294.3 | 210.0 | -60.0 |
SDDSC082 | In progress plan 1000 m | Rising Sun | 330484 | 5867895 | 289.0 | 74.0 | -68.0 |
SDDSC083 | 347.5 | Golden Dyke | 330461 | 5867922 | 285.4 | 196.0 | -54.0 |
SDDSC084 | 323.4 | Rising Sun | 330754 | 5868022 | 294.3 | 210.0 | -53.0 |
SDDSC085 | 827.4 | Apollo | 331254 | 5868099 | 353.8 | 222.0 | -64.0 |
SDDSC086 | 298.8 | Golden Dyke | 330461 | 5867922 | 285.4 | 208.0 | -33.0 |
SDDSC087 | 286.7 | Rising Sun | 330754 | 5868022 | 294.3 | 214.0 | -43.0 |
SDDSC088 | 360.0 | Rising Sun | 330754 | 5868022 | 294.3 | 214.0 | -33.0 |
SDDSC089 | 390.0 | Golden Dyke | 330461 | 5867922 | 285.4 | 214.0 | -48.0 |
SDDSC090 | 412.2 | Christina | 330461 | 5867922 | 285.4 | 226.0 | -31.0 |
SDDSC091 | In progress plan 580 m | Gentle Annie | 330871 | 5868064 | 305.6 | 210.0 | -69.0 |
SDDSC092 | In progress plan 830 m | Rising Sun | 330537 | 5867882 | 295.5 | 79.0 | -60 |
SDDSC093 | In progress plan 550 m | Rising Sun | 331291 | 5867823 | 316.8 | 271 | -47.5 |
SDDTS001 | 179.8 | Tonstal | 336788 | 5870637 | 525.0 | 156.0 | -50.0 |
SDDTS002 | 182.6 | Tonstal | 336788 | 5870637 | 525.0 | 111.0 | -42.0 |
SDDTS003 | 197.8 | Tonstal | 336788 | 5870637 | 525.0 | 111.0 | -73.0 |
SDDTS004 | 62.6 | Tonstal | 336788 | 5870637 | 525.0 | 79.0 | -60.0 |
SDDTS004A | 170.6 | Tonstal | 336788 | 5870637 | 525.0 | 79.0 | -60.0 |
SDDTS005A | 257.1 | Tonstal | 336788 | 5870637 | 525.0 | 70.0 | -42.0 |
SDDTS006 | 368.6 | Tonstal | 336788 | 5870637 | 525.0 | 48.0 | -50.0 |
SDDTS007 | 179.6 | Tonstal | 336788 | 5870637 | 525.2 | 230.0 | -50.0 |
SDDCN001 | 200.5 | Consols | 336270 | 5870700 | 507.0 | 220.0 | -60.0 |
SDDLV001 | 152.6 | Leviathan | 334240 | 5869962 | 552.2 | 190.0 | -60.0 |
SDDLV002 | 131.9 | Leviathan | 334240 | 5869962 | 552.2 | 240.0 | -50.0 |
SDDLV003 | 140.0 | Leviathan | 334240 | 5869962 | 552.2 | 90.0 | -60.0 |
SDDLV004 | 143.4 | Leviathan | 334428 | 5870014 | 553.0 | 242.5 | -40.0 |
Table 2: Tables of mineralized drill hole intersections reported from SDDSC077B using two cut-off criteria. Lower grades cut at 0.3 g/t lower cutoff over a maximum of 3 m with higher grades cut at 5.0 g/t AuEq cutoff over a maximum of 1 m.
Drill Hole | from (m) | to (m) | width (m) | Au g/t | Sb % | AuEq g/t | AuEq g/t * m |
SDDSC077B | 374.0 | 778.4 | 404.4 | 5.1 | 0.3 | 5.6 | 5.6 |
SDDSC077B | 379.7 | 380.0 | 0.3 | 7.0 | 2.2 | 10.5 | 2.6 |
SDDSC077B | 392.2 | 397.7 | 5.6 | 14.1 | 2.4 | 17.8 | 99.1 |
including | 392.2 | 392.4 | 0.2 | 31.4 | 0.0 | 31.5 | 6.6 |
including | 394.2 | 394.5 | 0.4 | 182.0 | 31.4 | 231.6 | 85.7 |
SDDSC077B | 404.6 | 404.9 | 0.3 | 11.3 | 4.1 | 17.8 | 4.4 |
SDDSC077B | 407.7 | 413.0 | 5.4 | 38.0 | 0.8 | 39.3 | 210.2 |
including | 407.7 | 408.0 | 0.4 | 574.0 | 12.4 | 593.6 | 207.8 |
SDDSC077B | 417.0 | 441.0 | 24.0 | 3.2 | 0.2 | 3.6 | 86.1 |
including | 422.1 | 423.6 | 1.5 | 39.7 | 2.1 | 43.1 | 65.5 |
including | 428.2 | 428.6 | 0.4 | 17.3 | 4.2 | 24.0 | 9.1 |
SDDSC077B | 445.2 | 450.0 | 4.9 | 20.1 | 10.1 | 36.1 | 175.3 |
including | 445.2 | 446.6 | 1.4 | 66.6 | 29.9 | 113.9 | 159.4 |
including | 449.7 | 450.0 | 0.3 | 12.1 | 26.5 | 54.0 | 14.6 |
SDDSC077B | 459.9 | 460.2 | 0.3 | 14.3 | 0.0 | 14.3 | 4.3 |
SDDSC077B | 478.0 | 511.8 | 33.8 | 2.4 | 0.4 | 3.0 | 102.7 |
including | 486.6 | 487.8 | 1.2 | 10.8 | 0.7 | 11.9 | 14.5 |
including | 491.9 | 492.4 | 0.5 | 20.9 | 0.0 | 21.0 | 9.4 |
including | 498.5 | 499.5 | 1.0 | 10.1 | 6.0 | 19.6 | 19.6 |
including | 500.9 | 501.1 | 0.2 | 168.0 | 9.6 | 183.2 | 36.6 |
including | 506.6 | 506.9 | 0.3 | 5.5 | 0.4 | 6.1 | 1.8 |
SDDSC077B | 517.0 | 536.2 | 19.2 | 1.5 | 0.7 | 2.6 | 48.9 |
including | 519.3 | 519.7 | 0.5 | 5.0 | 3.3 | 10.3 | 4.6 |
including | 524.3 | 524.4 | 0.2 | 31.2 | 0.9 | 32.7 | 5.6 |
including | 526.1 | 526.7 | 0.7 | 9.1 | 1.7 | 11.8 | 7.7 |
including | 528.2 | 529.8 | 1.6 | 2.9 | 1.8 | 5.8 | 9.6 |
including | 531.6 | 533.1 | 1.5 | 1.3 | 2.0 | 4.4 | 6.7 |
including | 535.8 | 536.2 | 0.4 | 10.7 | 5.2 | 18.9 | 7.2 |
SDDSC077B | 545.6 | 546.3 | 0.6 | 7.1 | 0.2 | 7.4 | 4.5 |
SDDSC077B | 568.4 | 568.5 | 0.1 | 0.1 | 17.0 | 27.0 | 1.9 |
SDDSC077B | 573.0 | 579.5 | 6.5 | 2.8 | 4.7 | 10.2 | 65.8 |
including | 574.0 | 576.6 | 2.6 | 6.3 | 11.3 | 24.1 | 63.1 |
SDDSC077B | 699.5 | 701.2 | 1.7 | 7.6 | 0.4 | 8.3 | 14.2 |
including | 700.1 | 700.8 | 0.7 | 18.2 | 0.7 | 19.4 | 13.4 |
SDDSC077B | 733.8 | 740.7 | 6.9 | 204.5 | 0.4 | 205.2 | 1424.1 |
including | 737.1 | 738.3 | 1.1 | 9.5 | 0.2 | 9.8 | 11.1 |
including | 739.9 | 740.7 | 0.8 | 1736.4 | 3.3 | 1741.5 | 1410.7 |
SDDSC077B | 752.4 | 752.7 | 0.3 | 11.7 | 0.0 | 11.7 | 3.5 |
SDDSC077B | 777.3 | 777.4 | 0.2 | 5.3 | 0.0 | 5.4 | 0.9 |
Table 3: All individual assays reported from SDDSC077B >0.1g/t AuEq.
Drill Hole | from (m) | to (m) | width (m) | Au g/t | Sb% | AuEq g/t |
SDDSC077B | 101.00 | 101.50 | 0.5 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 105.58 | 106.07 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 109.55 | 110.00 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 110.00 | 111.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 310.65 | 311.30 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 349.00 | 349.30 | 0.3 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 371.04 | 372.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 373.00 | 374.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 374.00 | 374.35 | 0.4 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 374.75 | 375.10 | 0.4 | 1.1 | 0.1 | 1.2 |
SDDSC077B | 375.10 | 375.90 | 0.8 | 0.8 | 0.0 | 0.9 |
SDDSC077B | 375.90 | 376.75 | 0.9 | 0.6 | 0.0 | 0.7 |
SDDSC077B | 376.75 | 377.70 | 1.0 | 2.2 | 0.3 | 2.7 |
SDDSC077B | 377.70 | 378.80 | 1.1 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 378.80 | 379.30 | 0.5 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 379.30 | 379.70 | 0.4 | 0.2 | 0.0 | 0.3 |
SDDSC077B | 379.70 | 379.95 | 0.3 | 7.0 | 2.2 | 10.5 |
SDDSC077B | 379.95 | 380.90 | 1.0 | 0.6 | 0.2 | 0.9 |
SDDSC077B | 380.90 | 381.55 | 0.7 | 0.2 | 0.0 | 0.3 |
SDDSC077B | 381.55 | 382.30 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 382.30 | 383.25 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 383.25 | 384.00 | 0.8 | 0.7 | 0.0 | 0.7 |
SDDSC077B | 384.00 | 384.30 | 0.3 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 386.91 | 387.24 | 0.3 | 0.8 | 0.3 | 1.3 |
SDDSC077B | 389.20 | 390.20 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 390.20 | 391.19 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 392.16 | 392.37 | 0.2 | 31.4 | 0.0 | 31.5 |
SDDSC077B | 392.70 | 393.20 | 0.5 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 393.20 | 394.17 | 1.0 | 1.2 | 0.6 | 2.1 |
SDDSC077B | 394.17 | 394.54 | 0.4 | 182.0 | 31.4 | 231.6 |
SDDSC077B | 394.54 | 395.00 | 0.5 | 1.1 | 0.8 | 2.3 |
SDDSC077B | 395.00 | 395.54 | 0.5 | 1.3 | 0.4 | 1.9 |
SDDSC077B | 395.54 | 396.25 | 0.7 | 1.8 | 0.5 | 2.6 |
SDDSC077B | 396.25 | 396.46 | 0.2 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 396.46 | 397.50 | 1.0 | 0.2 | 0.1 | 0.4 |
SDDSC077B | 397.50 | 397.72 | 0.2 | 0.7 | 0.0 | 0.7 |
SDDSC077B | 398.50 | 399.25 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 400.90 | 401.24 | 0.3 | 0.3 | 0.1 | 0.5 |
SDDSC077B | 403.90 | 404.15 | 0.3 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 404.15 | 404.60 | 0.5 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 404.60 | 404.85 | 0.3 | 11.3 | 4.1 | 17.8 |
SDDSC077B | 404.85 | 405.40 | 0.6 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 405.40 | 406.15 | 0.8 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 406.15 | 406.92 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 406.92 | 407.65 | 0.7 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 407.65 | 408.00 | 0.4 | 574.0 | 12.4 | 593.6 |
SDDSC077B | 408.00 | 408.33 | 0.3 | 0.7 | 0.0 | 0.7 |
SDDSC077B | 408.33 | 409.02 | 0.7 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 409.02 | 409.98 | 1.0 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 409.98 | 410.40 | 0.4 | 0.5 | 0.1 | 0.7 |
SDDSC077B | 411.05 | 411.64 | 0.6 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 411.64 | 412.09 | 0.5 | 1.6 | 0.1 | 1.7 |
SDDSC077B | 412.09 | 413.00 | 0.9 | 0.6 | 0.0 | 0.6 |
SDDSC077B | 413.82 | 414.85 | 1.0 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 416.00 | 417.00 | 1.0 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 417.00 | 418.00 | 1.0 | 1.0 | 0.1 | 1.0 |
SDDSC077B | 418.50 | 418.85 | 0.4 | 0.6 | 0.0 | 0.7 |
SDDSC077B | 418.85 | 419.26 | 0.4 | 0.7 | 0.1 | 0.8 |
SDDSC077B | 419.26 | 420.15 | 0.9 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 420.15 | 421.10 | 1.0 | 0.3 | 0.0 | 0.4 |
SDDSC077B | 421.10 | 421.70 | 0.6 | 0.4 | 0.1 | 0.5 |
SDDSC077B | 421.70 | 422.08 | 0.4 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 422.08 | 422.47 | 0.4 | 144.0 | 7.8 | 156.3 |
SDDSC077B | 422.47 | 422.83 | 0.4 | 1.1 | 0.4 | 1.7 |
SDDSC077B | 422.83 | 423.60 | 0.8 | 5.0 | 0.1 | 5.1 |
SDDSC077B | 423.60 | 424.50 | 0.9 | 0.0 | 0.1 | 0.1 |
SDDSC077B | 425.96 | 426.75 | 0.8 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 426.75 | 427.10 | 0.4 | 1.1 | 0.0 | 1.2 |
SDDSC077B | 427.10 | 427.80 | 0.7 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 427.80 | 428.20 | 0.4 | 1.8 | 0.2 | 2.1 |
SDDSC077B | 428.20 | 428.58 | 0.4 | 17.3 | 4.2 | 24.0 |
SDDSC077B | 428.58 | 429.20 | 0.6 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 430.10 | 430.75 | 0.7 | 0.9 | 0.0 | 1.0 |
SDDSC077B | 431.20 | 431.85 | 0.7 | 0.4 | 0.1 | 0.6 |
SDDSC077B | 431.85 | 432.20 | 0.4 | 0.3 | 0.0 | 0.4 |
SDDSC077B | 433.00 | 434.00 | 1.0 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 434.00 | 435.00 | 1.0 | 3.1 | 0.1 | 3.2 |
SDDSC077B | 435.00 | 436.00 | 1.0 | 1.1 | 0.0 | 1.2 |
SDDSC077B | 436.00 | 437.00 | 1.0 | 0.4 | 0.1 | 0.5 |
SDDSC077B | 439.00 | 440.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 440.00 | 441.00 | 1.0 | 0.5 | 0.1 | 0.7 |
SDDSC077B | 445.15 | 445.45 | 0.3 | 101.0 | 15.0 | 124.7 |
SDDSC077B | 445.45 | 445.84 | 0.4 | 35.5 | 34.8 | 90.5 |
SDDSC077B | 445.84 | 446.07 | 0.2 | 85.9 | 27.7 | 129.7 |
SDDSC077B | 446.07 | 446.55 | 0.5 | 61.2 | 36.3 | 118.6 |
SDDSC077B | 446.55 | 447.00 | 0.5 | 0.8 | 0.2 | 1.1 |
SDDSC077B | 448.00 | 449.00 | 1.0 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 449.00 | 449.74 | 0.7 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 449.74 | 450.01 | 0.3 | 12.1 | 26.5 | 54.0 |
SDDSC077B | 450.01 | 450.65 | 0.6 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 458.70 | 459.05 | 0.4 | 0.4 | 0.3 | 0.9 |
SDDSC077B | 459.05 | 459.55 | 0.5 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 459.55 | 459.90 | 0.4 | 0.9 | 0.1 | 1.0 |
SDDSC077B | 459.90 | 460.20 | 0.3 | 14.3 | 0.0 | 14.3 |
SDDSC077B | 460.20 | 460.50 | 0.3 | 0.9 | 0.0 | 1.0 |
SDDSC077B | 460.50 | 461.05 | 0.6 | 0.8 | 0.0 | 0.8 |
SDDSC077B | 461.05 | 462.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 462.00 | 462.80 | 0.8 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 468.80 | 469.50 | 0.7 | 0.0 | 0.1 | 0.1 |
SDDSC077B | 472.25 | 473.05 | 0.8 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 477.95 | 478.29 | 0.3 | 0.4 | 0.1 | 0.6 |
SDDSC077B | 479.29 | 479.93 | 0.6 | 0.7 | 0.9 | 2.1 |
SDDSC077B | 479.93 | 480.35 | 0.4 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 480.35 | 480.55 | 0.2 | 1.0 | 0.9 | 2.4 |
SDDSC077B | 480.55 | 481.40 | 0.9 | 0.3 | 0.1 | 0.5 |
SDDSC077B | 481.40 | 481.72 | 0.3 | 1.5 | 0.9 | 2.9 |
SDDSC077B | 481.72 | 482.41 | 0.7 | 0.3 | 0.1 | 0.4 |
SDDSC077B | 482.41 | 483.50 | 1.1 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 483.50 | 484.00 | 0.5 | 0.5 | 0.1 | 0.7 |
SDDSC077B | 484.00 | 484.40 | 0.4 | 3.5 | 0.0 | 3.6 |
SDDSC077B | 484.40 | 485.00 | 0.6 | 0.9 | 0.1 | 1.0 |
SDDSC077B | 485.00 | 485.90 | 0.9 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 485.90 | 486.20 | 0.3 | 1.7 | 0.5 | 2.5 |
SDDSC077B | 486.60 | 486.90 | 0.3 | 3.7 | 1.1 | 5.5 |
SDDSC077B | 486.90 | 487.41 | 0.5 | 0.9 | 0.5 | 1.8 |
SDDSC077B | 487.41 | 487.82 | 0.4 | 28.3 | 0.6 | 29.2 |
SDDSC077B | 488.47 | 488.89 | 0.4 | 1.6 | 0.4 | 2.3 |
SDDSC077B | 488.89 | 489.52 | 0.6 | 0.2 | 0.2 | 0.5 |
SDDSC077B | 489.52 | 490.34 | 0.8 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 490.34 | 491.10 | 0.8 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 491.10 | 491.90 | 0.8 | 0.9 | 0.2 | 1.2 |
SDDSC077B | 491.90 | 492.35 | 0.5 | 20.9 | 0.0 | 21.0 |
SDDSC077B | 492.35 | 492.70 | 0.4 | 1.8 | 0.2 | 2.1 |
SDDSC077B | 492.70 | 493.25 | 0.6 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 493.25 | 493.90 | 0.7 | 0.2 | 0.1 | 0.4 |
SDDSC077B | 493.90 | 494.60 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 494.60 | 494.82 | 0.2 | 1.1 | 0.5 | 1.9 |
SDDSC077B | 494.82 | 495.87 | 1.1 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 495.87 | 496.85 | 1.0 | 0.2 | 0.1 | 0.2 |
SDDSC077B | 496.85 | 497.80 | 1.0 | 0.8 | 0.2 | 1.1 |
SDDSC077B | 497.80 | 498.50 | 0.7 | 0.7 | 0.1 | 0.8 |
SDDSC077B | 498.50 | 498.83 | 0.3 | 16.4 | 11.7 | 34.9 |
SDDSC077B | 498.83 | 499.50 | 0.7 | 7.0 | 3.2 | 12.1 |
SDDSC077B | 499.50 | 500.50 | 1.0 | 0.4 | 0.3 | 0.9 |
SDDSC077B | 500.50 | 500.90 | 0.4 | 1.9 | 0.1 | 2.1 |
SDDSC077B | 500.90 | 501.10 | 0.2 | 168.0 | 9.6 | 183.2 |
SDDSC077B | 501.10 | 501.50 | 0.4 | 1.1 | 0.4 | 1.6 |
SDDSC077B | 501.50 | 501.90 | 0.4 | 0.6 | 0.0 | 0.7 |
SDDSC077B | 501.90 | 503.00 | 1.1 | 0.3 | 0.1 | 0.5 |
SDDSC077B | 503.00 | 504.00 | 1.0 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 504.00 | 505.25 | 1.3 | 0.8 | 0.0 | 0.9 |
SDDSC077B | 506.15 | 506.55 | 0.4 | 0.5 | 0.1 | 0.7 |
SDDSC077B | 506.55 | 506.85 | 0.3 | 5.5 | 0.4 | 6.1 |
SDDSC077B | 507.85 | 508.20 | 0.4 | 1.8 | 0.5 | 2.6 |
SDDSC077B | 508.20 | 509.00 | 0.8 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 509.30 | 509.70 | 0.4 | 1.3 | 0.2 | 1.5 |
SDDSC077B | 509.70 | 510.34 | 0.6 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 511.10 | 511.76 | 0.7 | 0.2 | 0.1 | 0.4 |
SDDSC077B | 514.55 | 514.85 | 0.3 | 0.1 | 0.1 | 0.4 |
SDDSC077B | 514.85 | 515.30 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 515.30 | 515.75 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 517.00 | 517.80 | 0.8 | 0.3 | 0.1 | 0.4 |
SDDSC077B | 518.70 | 519.25 | 0.6 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 519.25 | 519.70 | 0.5 | 5.0 | 3.3 | 10.3 |
SDDSC077B | 519.70 | 520.05 | 0.4 | 1.2 | 0.7 | 2.4 |
SDDSC077B | 520.05 | 520.35 | 0.3 | 0.3 | 0.6 | 1.3 |
SDDSC077B | 520.35 | 520.70 | 0.4 | 1.3 | 0.5 | 2.1 |
SDDSC077B | 521.50 | 521.80 | 0.3 | 0.6 | 0.4 | 1.3 |
SDDSC077B | 523.40 | 523.70 | 0.3 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 524.25 | 524.42 | 0.2 | 31.2 | 0.9 | 32.7 |
SDDSC077B | 524.42 | 525.20 | 0.8 | 0.1 | 0.1 | 0.2 |
SDDSC077B | 525.20 | 525.35 | 0.2 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 526.05 | 526.20 | 0.2 | 4.8 | 0.7 | 5.9 |
SDDSC077B | 526.20 | 526.70 | 0.5 | 10.4 | 2.0 | 13.6 |
SDDSC077B | 526.70 | 526.95 | 0.3 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 526.95 | 527.30 | 0.4 | 0.2 | 0.2 | 0.5 |
SDDSC077B | 527.30 | 528.15 | 0.9 | 0.2 | 0.1 | 0.4 |
SDDSC077B | 528.15 | 528.41 | 0.3 | 4.8 | 1.3 | 6.9 |
SDDSC077B | 528.41 | 528.67 | 0.3 | 5.9 | 1.8 | 8.8 |
SDDSC077B | 528.67 | 529.16 | 0.5 | 0.5 | 0.3 | 1.0 |
SDDSC077B | 529.16 | 529.31 | 0.2 | 2.5 | 1.5 | 4.8 |
SDDSC077B | 529.31 | 529.46 | 0.2 | 1.0 | 0.0 | 1.0 |
SDDSC077B | 529.46 | 529.80 | 0.3 | 3.7 | 5.4 | 12.2 |
SDDSC077B | 529.80 | 529.95 | 0.2 | 1.8 | 1.0 | 3.4 |
SDDSC077B | 529.95 | 530.40 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 530.40 | 530.70 | 0.3 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 530.70 | 531.00 | 0.3 | 0.3 | 0.4 | 0.9 |
SDDSC077B | 531.00 | 531.30 | 0.3 | 0.5 | 0.2 | 0.8 |
SDDSC077B | 531.30 | 531.60 | 0.3 | 0.2 | 0.1 | 0.4 |
SDDSC077B | 531.60 | 531.90 | 0.3 | 1.4 | 2.9 | 6.0 |
SDDSC077B | 532.50 | 532.80 | 0.3 | 2.1 | 1.6 | 4.6 |
SDDSC077B | 532.80 | 533.10 | 0.3 | 3.0 | 5.4 | 11.5 |
SDDSC077B | 533.10 | 533.40 | 0.3 | 0.7 | 0.9 | 2.0 |
SDDSC077B | 533.40 | 534.05 | 0.7 | 0.3 | 0.0 | 0.4 |
SDDSC077B | 534.05 | 534.60 | 0.6 | 0.5 | 0.5 | 1.3 |
SDDSC077B | 534.93 | 535.23 | 0.3 | 0.1 | 0.1 | 0.3 |
SDDSC077B | 535.53 | 535.78 | 0.3 | 3.8 | 0.1 | 3.9 |
SDDSC077B | 535.78 | 536.16 | 0.4 | 10.7 | 5.2 | 18.9 |
SDDSC077B | 538.70 | 539.10 | 0.4 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 542.35 | 542.85 | 0.5 | 0.1 | 0.1 | 0.2 |
SDDSC077B | 543.20 | 543.75 | 0.6 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 544.35 | 544.85 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 544.85 | 545.25 | 0.4 | 0.9 | 0.1 | 1.0 |
SDDSC077B | 545.25 | 545.64 | 0.4 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 545.64 | 546.25 | 0.6 | 7.1 | 0.2 | 7.4 |
SDDSC077B | 546.25 | 546.85 | 0.6 | 0.2 | 0.1 | 0.3 |
SDDSC077B | 546.85 | 547.30 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 547.30 | 547.85 | 0.6 | 0.7 | 0.1 | 0.8 |
SDDSC077B | 552.85 | 553.70 | 0.9 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 553.70 | 554.25 | 0.6 | 1.8 | 0.5 | 2.6 |
SDDSC077B | 555.20 | 555.60 | 0.4 | 0.5 | 0.1 | 0.7 |
SDDSC077B | 556.15 | 556.50 | 0.4 | 2.4 | 0.8 | 3.7 |
SDDSC077B | 556.50 | 557.40 | 0.9 | 0.5 | 0.2 | 0.7 |
SDDSC077B | 557.40 | 557.80 | 0.4 | 0.4 | 0.1 | 0.6 |
SDDSC077B | 557.80 | 558.50 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 558.50 | 559.00 | 0.5 | 1.9 | 0.0 | 1.9 |
SDDSC077B | 559.00 | 559.60 | 0.6 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 562.20 | 562.55 | 0.4 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 562.85 | 563.10 | 0.3 | 0.0 | 0.9 | 1.4 |
SDDSC077B | 563.10 | 563.45 | 0.4 | 0.3 | 0.1 | 0.5 |
SDDSC077B | 563.45 | 563.75 | 0.3 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 564.30 | 564.90 | 0.6 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 564.90 | 565.35 | 0.5 | 0.1 | 0.4 | 0.7 |
SDDSC077B | 568.43 | 568.50 | 0.1 | 0.1 | 17.0 | 27.0 |
SDDSC077B | 568.50 | 569.00 | 0.5 | 0.0 | 0.1 | 0.2 |
SDDSC077B | 573.00 | 573.85 | 0.9 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 573.85 | 573.98 | 0.1 | 1.9 | 1.9 | 4.9 |
SDDSC077B | 573.98 | 574.35 | 0.4 | 11.3 | 55.8 | 99.5 |
SDDSC077B | 574.35 | 574.60 | 0.3 | 2.4 | 22.3 | 37.6 |
SDDSC077B | 574.60 | 575.40 | 0.8 | 2.1 | 3.0 | 6.7 |
SDDSC077B | 575.40 | 576.22 | 0.8 | 0.9 | 0.8 | 2.1 |
SDDSC077B | 576.22 | 576.60 | 0.4 | 24.5 | 0.8 | 25.7 |
SDDSC077B | 576.60 | 577.16 | 0.6 | 0.6 | 0.1 | 0.8 |
SDDSC077B | 577.16 | 577.50 | 0.3 | 0.3 | 0.1 | 0.4 |
SDDSC077B | 577.50 | 578.16 | 0.7 | 0.3 | 0.0 | 0.4 |
SDDSC077B | 578.16 | 579.08 | 0.9 | 0.4 | 0.2 | 0.6 |
SDDSC077B | 579.08 | 579.25 | 0.2 | 0.9 | 0.4 | 1.5 |
SDDSC077B | 579.25 | 579.45 | 0.2 | 0.5 | 0.0 | 0.6 |
SDDSC077B | 579.45 | 580.06 | 0.6 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 582.40 | 582.90 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 611.74 | 612.00 | 0.3 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 614.12 | 614.40 | 0.3 | 2.3 | 1.2 | 4.2 |
SDDSC077B | 614.40 | 614.90 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 614.90 | 615.05 | 0.2 | 0.2 | 0.2 | 0.5 |
SDDSC077B | 615.05 | 615.40 | 0.4 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 631.00 | 632.00 | 1.0 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 635.00 | 636.00 | 1.0 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 673.91 | 674.41 | 0.5 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 699.00 | 699.50 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 699.50 | 699.88 | 0.4 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 699.88 | 700.14 | 0.3 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 700.14 | 700.83 | 0.7 | 18.2 | 0.7 | 19.4 |
SDDSC077B | 700.83 | 701.20 | 0.4 | 0.8 | 0.6 | 1.8 |
SDDSC077B | 701.20 | 701.56 | 0.4 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 716.00 | 717.00 | 1.0 | 0.2 | 0.2 | 0.4 |
SDDSC077B | 717.00 | 718.00 | 1.0 | 0.1 | 0.1 | 0.1 |
SDDSC077B | 718.00 | 718.37 | 0.4 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 718.37 | 718.86 | 0.5 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 722.38 | 723.43 | 1.1 | 0.6 | 0.0 | 0.6 |
SDDSC077B | 725.00 | 725.50 | 0.5 | 0.1 | 0.0 | 0.2 |
SDDSC077B | 725.50 | 726.00 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 728.90 | 729.72 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 733.00 | 733.46 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 733.46 | 733.80 | 0.3 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 733.80 | 734.05 | 0.3 | 0.5 | 0.0 | 0.5 |
SDDSC077B | 734.05 | 734.70 | 0.7 | 0.0 | 0.0 | 0.1 |
SDDSC077B | 735.00 | 735.45 | 0.5 | 0.9 | 0.0 | 0.9 |
SDDSC077B | 735.45 | 736.32 | 0.9 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 737.12 | 737.40 | 0.3 | 17.4 | 0.2 | 17.7 |
SDDSC077B | 737.40 | 737.70 | 0.3 | 1.9 | 0.5 | 2.8 |
SDDSC077B | 737.70 | 737.96 | 0.3 | 1.9 | 0.1 | 2.0 |
SDDSC077B | 737.96 | 738.25 | 0.3 | 16.4 | 0.0 | 16.5 |
SDDSC077B | 738.25 | 738.75 | 0.5 | 1.1 | 0.1 | 1.2 |
SDDSC077B | 738.75 | 739.27 | 0.5 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 739.27 | 739.60 | 0.3 | 1.3 | 0.0 | 1.3 |
SDDSC077B | 739.60 | 739.93 | 0.3 | 1.5 | 0.0 | 1.5 |
SDDSC077B | 739.93 | 740.32 | 0.4 | 731.0 | 0.1 | 731.2 |
SDDSC077B | 740.32 | 740.74 | 0.4 | 2670.0 | 6.2 | 2679.8 |
SDDSC077B | 740.74 | 741.30 | 0.6 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 741.30 | 741.77 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 741.77 | 742.58 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 746.77 | 747.07 | 0.3 | 4.9 | 0.0 | 4.9 |
SDDSC077B | 749.10 | 749.60 | 0.5 | 0.6 | 0.0 | 0.6 |
SDDSC077B | 750.50 | 751.40 | 0.9 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 751.73 | 752.40 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 752.40 | 752.70 | 0.3 | 11.7 | 0.0 | 11.7 |
SDDSC077B | 755.70 | 756.70 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 756.70 | 757.70 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 757.70 | 758.30 | 0.6 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 763.55 | 764.66 | 1.1 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 764.66 | 765.23 | 0.6 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 765.23 | 765.41 | 0.2 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 765.41 | 766.00 | 0.6 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 766.00 | 767.00 | 1.0 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 767.00 | 767.55 | 0.6 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 767.55 | 768.25 | 0.7 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 768.25 | 769.15 | 0.9 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 769.15 | 769.50 | 0.4 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 769.50 | 770.00 | 0.5 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 770.25 | 770.50 | 0.3 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 770.50 | 770.72 | 0.2 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 771.45 | 771.80 | 0.4 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 774.17 | 774.48 | 0.3 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 774.48 | 774.80 | 0.3 | 0.4 | 0.0 | 0.4 |
SDDSC077B | 774.80 | 775.57 | 0.8 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 775.57 | 776.30 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 776.30 | 776.60 | 0.3 | 0.0 | 0.1 | 0.1 |
SDDSC077B | 776.60 | 777.25 | 0.7 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 777.25 | 777.42 | 0.2 | 5.3 | 0.0 | 5.4 |
SDDSC077B | 777.42 | 778.15 | 0.7 | 0.2 | 0.0 | 0.3 |
SDDSC077B | 778.15 | 778.35 | 0.2 | 3.5 | 0.0 | 3.5 |
SDDSC077B | 778.35 | 779.10 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 779.10 | 779.61 | 0.5 | 0.3 | 0.0 | 0.3 |
SDDSC077B | 779.61 | 780.20 | 0.6 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 781.20 | 782.16 | 1.0 | 0.8 | 0.0 | 0.8 |
SDDSC077B | 782.16 | 783.00 | 0.8 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 783.00 | 784.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 784.00 | 785.00 | 1.0 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 785.00 | 786.00 | 1.0 | 0.1 | 0.0 | 0.1 |
SDDSC077B | 786.00 | 787.06 | 1.1 | 0.2 | 0.0 | 0.2 |
SDDSC077B | 787.06 | 787.60 | 0.5 | 0.5 | 0.0 | 0.5 |
SDDSC077B | 795.00 | 795.20 | 0.2 | 0.1 | 0.0 | 0.1 |
SOURCE: Mawson Gold Limited
View source version on accesswire.com:
https://www.accesswire.com/780309/mawsons-subsidiary-sxg-drills-404-m-51-gt-gold-uncut-traversing-13-high-grade-veins-7-intersections-100-gt-gold-up-to-2670-gt-gold-assays-pending-on-100-m-step-out-hole-intersecting-multiple-zones-of-visible-gold
FAQ
What company announced the results from the Sunday Creek Project?
Where is the Sunday Creek Project located?
What were the results of hole SDDSC077B?
Who owns the Sunday Creek Project?