Fortuna intersects 7.2 g/t Au over 31.5 meters at Kingfisher, Séguéla Mine, Côte d’Ivoire
Fortuna Mining (NYSE: FSM) has announced significant exploration results from its Séguéla Mine in Côte d'Ivoire. At the Kingfisher deposit, drilling intersected 7.2 g/t Au over 31.5 meters, with 100 drill holes totaling 10,978 meters completed of a planned 28,000-meter program. The company expects to convert Kingfisher resources into Mineral Reserves in 2025.
At the Sunbird deposit, deep exploration drilling revealed 4.3 g/t Au over 23.1 meters from 733 meters depth, representing the deepest intercept to date. Drilling has extended mineralization approximately 700 meters south beyond the current underground Inferred Resource and 600 meters below surface. The mineralization remains open at depth and down plunge.
Fortuna Mining (NYSE: FSM) ha annunciato risultati significativi delle esplorazioni dalla sua Miniera di Séguéla in Costa d'Avorio. Nel giacimento Kingfisher, i sondaggi hanno intercettato 7,2 g/t Au su 31,5 metri, con 100 fori di perforazione completati per un totale di 10.978 metri su un programma pianificato di 28.000 metri. L'azienda prevede di convertire le risorse di Kingfisher in Riserve Minerarie nel 2025.
Nel giacimento Sunbird, le perforazioni esplorative profonde hanno rivelato 4,3 g/t Au su 23,1 metri a partire da una profondità di 733 metri, rappresentando l'intercettazione più profonda fino ad oggi. Le perforazioni hanno esteso la mineralizzazione per circa 700 metri a sud oltre l'attuale Risorsa Inferenziale sotterranea e 600 metri sotto la superficie. La mineralizzazione rimane aperta in profondità e in discesa.
Fortuna Mining (NYSE: FSM) ha anunciado resultados significativos de exploración de su minería de Séguéla en Costa de Marfil. En el depósito Kingfisher, la perforación intersectó 7.2 g/t Au a lo largo de 31.5 metros, con 100 agujeros de perforación completados que suman 10,978 metros de un programa planificado de 28,000 metros. La compañía espera convertir los recursos de Kingfisher en Reservas Minerales en 2025.
En el depósito Sunbird, la perforación de exploración profunda reveló 4.3 g/t Au a 23.1 metros de profundidad desde 733 metros, representando la intersección más profunda hasta la fecha. La perforación ha extendido la mineralización aproximadamente 700 metros al sur más allá de la actual Recurso Inferido subterráneo y 600 metros por debajo de la superficie. La mineralización permanece abierta en profundidad y en descenso.
Fortuna Mining (NYSE: FSM)은 코트디부아르의 세귤라 광산에서 중요한 탐사 결과를 발표했습니다. 킹피셔 매장지에서 드릴링이 31.5미터에 걸쳐 7.2g/t Au를 발견했으며, 계획된 28,000미터 프로그램 중 10,978미터를 완료한 100개의 드릴 홀을 포함합니다. 회사는 2025년까지 킹피셔 자원을 광물 매장량으로 전환할 것으로 예상하고 있습니다.
선버드 매장지에서는 깊은 탐사 드릴링을 통해 733미터 깊이에서 23.1미터에 걸쳐 4.3g/t Au가 발견되어 지금까지의 가장 깊은 인터셉트를 나타냅니다. 드릴링은 현재의 지하 추정 자원보다 남쪽으로 약 700미터, 지표면 아래로 600미터까지 광물화를 연장했습니다. 광물화는 깊이와 아래쪽 경사에서 계속 열려 있습니다.
Fortuna Mining (NYSE: FSM) a annoncé des résultats d'exploration significatifs de sa mine de Séguéla en Côte d'Ivoire. Au dépôt Kingfisher, le forage a intercepté 7,2 g/t Au sur 31,5 mètres, avec 100 forages totalisant 10 978 mètres réalisés dans le cadre d'un programme prévu de 28 000 mètres. La société s'attend à convertir les ressources de Kingfisher en réserves minérales en 2025.
Au dépôt Sunbird, le forage d'exploration en profondeur a révélé 4,3 g/t Au sur 23,1 mètres à partir d'une profondeur de 733 mètres, représentant l'interception la plus profonde à ce jour. Le forage a étendu la minéralisation d'environ 700 mètres au sud au-delà de la ressource inférée souterraine actuelle et 600 mètres sous la surface. La minéralisation reste ouverte en profondeur et en plongée.
Fortuna Mining (NYSE: FSM) hat bedeutende Erkundungsergebnisse aus seiner Séguéla Mine in der Elfenbeinküste bekannt gegeben. Im Kingfisher-Vorkommen wurde bei Bohrungen ein Gehalt von 7,2 g/t Au über 31,5 Meter festgestellt, wobei 100 Bohrlöcher mit einer Gesamtlänge von 10.978 Metern im Rahmen eines geplanten Programms von 28.000 Metern abgeschlossen wurden. Das Unternehmen erwartet, die Ressourcen von Kingfisher bis 2025 in Mineralreserven umzuwandeln.
Im Sunbird-Vorkommen zeigte eine tiefe Erkundungsbohrung 4,3 g/t Au über 23,1 Meter aus einer Tiefe von 733 Metern, was den tiefsten Schnitt bis heute darstellt. Die Bohrungen haben die Mineralisierung etwa 700 Meter südlich über die aktuelle unterirdische geschätzte Ressource hinaus und 600 Meter unter der Oberfläche erweitert. Die Mineralisierung bleibt in der Tiefe und im Abfall offen.
- High-grade gold intersection of 7.2 g/t Au over 31.5m at Kingfisher
- Deep drilling success at Sunbird with 4.3 g/t Au over 23.1m
- Significant expansion of mineralization at Sunbird (700m south, 600m below surface)
- Planned conversion of Kingfisher resources to reserves in 2025
- Kingfisher deposit remains relatively shallow with drilling only to 250m depth
- Only 39% of planned Kingfisher drilling program completed (10,978m of 28,000m)
Insights
Fortuna's exploration update from Séguéla Mine represents significant positive developments for the company's resource potential. The standout result of 7.2 g/t Au over 31.5 meters at Kingfisher demonstrates exceptional grade-thickness that substantially exceeds the economic threshold typically seen in open-pit operations in West Africa.
The planned conversion of Kingfisher resources to reserves in 2025 will likely expand Séguéla's production profile and mine life, directly enhancing the operation's net present value. The 10,978 meters completed of a planned 28,000-meter infill program indicates steady progress toward this goal, with results confirming the previously identified grade tenor.
At Sunbird, the deep intersection of 4.3 g/t Au over 23.1 meters from 733 meters depth represents the deepest mineralization encountered at Séguéla to date. This validates the deposit's underground potential and suggests a robust mineralized system continuing at depth. The 700-meter southern extension beyond current resource boundaries materially increases the footprint of potential mineralization.
Most crucially, both deposits remain open for expansion - Kingfisher at depth across most of its 2-kilometer strike length, and Sunbird both at depth and down-plunge. This exploration success reinforces Séguéla's potential as a multi-deposit mining center with expanding resources capable of supporting increased production rates and extended mine life beyond current projections.
These exploration results strengthen Fortuna's growth profile and asset quality at Séguéla. The high-grade intercepts at Kingfisher are particularly valuable as they fall within the current resource pit design, meaning minimal additional stripping would be required to access this material. The planned reserve conversion in 2025 will likely improve Séguéla's economic parameters.
From a valuation perspective, the Sunbird results are even more significant. Deep high-grade underground discoveries typically command premium valuations, as they can provide high-margin supplemental feed to existing processing facilities with relatively modest capital requirements. The intersection at 733 meters depth with 4.3 g/t Au over substantial width validates Fortuna's exploration model and suggests potential for a long-lived underground operation.
The systematic expansion of both deposits enhances Fortuna's resource replacement pipeline, addressing a key concern for producing gold miners - maintaining adequate reserves to sustain operations. With gold prices near historic highs, these discoveries arrive at an optimal time when reinvestment economics are highly favorable.
These results should positively impact Fortuna's net asset value calculations, as analysts will likely incorporate expanded resource scenarios into their models. The market typically values proven exploration success at gold producers more generously than pure exploration companies due to the clear pathway to monetization through existing infrastructure.
VANCOUVER, British Columbia, March 13, 2025 (GLOBE NEWSWIRE) -- Fortuna Mining Corp. (NYSE: FSM | TSX: FVI) is pleased to provide an update on its exploration programs at the Séguéla Mine in Côte d’Ivoire.
Paul Weedon, Senior Vice President of Exploration at Fortuna, commented, “Exploration drilling at Kingfisher has moved to infilling and improving the resource confidence along the 1-kilometer strike length of the current resource pit, with several notable intersections including 7.2 g/t Au over an estimated true width of 31.5 meters in drill hole SGRC2278.” Mr. Weedon continued, “At the Sunbird deposit, deep exploration drilling testing the southern extent has continued to return excellent results, including 4.3 g/t Au over a true width of 23.1 meters from 733 meters in drill hole SGRD2215, representing the deepest intercept to date, with mineralization remaining open at depth and down plunge.”
Kingfisher deposit
Once the infill program and near exploration are successfully completed, we expect to migrate the Kingfisher resources into the Séguéla Mine Mineral Reserves in 2025.
Drilling highlights include:
| SGRD2153: | 10.6 g/t Au 65.9 g/t Au 44.8 g/t Au | over an estimated true width of 9.4 meters from 223 meters, including over an estimated true width of 0.9 meters from 223 meters, and over an estimated true width of 0.9 meters from 227 meters |
| SGRC2264: | 8.4 g/t Au 62.6 g/t Au 6.9 g/t Au 43.2 g/t Au | over an estimated true width of 14.5 meters from 10 meters, including over an estimated true width of 1.7 meters from 19 meters over an estimated true width of 6.0 meters from 31 meters, including over an estimated true width of 0.9 meters from 31 meters |
| SGRC2278: | 7.2 g/t Au 28.9 g/t Au 128.9 g/t Au | over an estimated true width of 31.5 meters from 91 meters, including over an estimated true width of 1.7 meters from 118 meters, and over an estimated true width of 0.9 meters from 123 meters |
| SGRD2280: | 8.1 g/t Au 18.7 g/t Au 24.6 g/t Au | over an estimated true width of 16.2 meters from 89 meters, including over an estimated true width of 3.4 meters from 96 meters over an estimated true width of 1.7 meters from 106 meters |
| SGRC2309: | 3.3 g/t Au 26.2 g/t Au | over an estimated true width of 35.7 meters from 46 meters, including over an estimated true width of 0.9 meters from 74 meters |
| SGRC2312: | 3.8 g/t Au 44.2 g/t Au | over an estimated true width of 39.1 meters from 86 meters, including over an estimated true width of 1.7 meters from 123 meters |
| SGRC2322: | 7.9 g/t Au 68.5 g/t Au | over an estimated true width of 11.9 meters from 140 meters, including over an estimated true width of 0.9 meters from 149 meters |
An additional 100 drill holes, totaling 10,978 meters of a planned 28,000-meter drilling program, have been completed at the Kingfisher deposit (see Figure 1) as part of the resource confidence infill program (see Figure 2). Drilling remains ongoing across the current pit-constrained Inferred Resource and will also extend to test the immediate margins, both at depth and along strike, where late 2024 drilling identified several promising intervals intersected after the initial resource estimate was completed (refer to Fortuna’s news release dated December 16, 2024).
The recent drilling has continued to highlight the widths and grade tenor intersected in the first drilling phase, supporting and refining the geological interpretation. Kingfisher remains open at depth for most of the drilled 2-kilometer strike length, with the deepest drilling testing to only approximately 250 meters below surface (refer to Figure 2).
Figure 1: Séguéla Mine deposit locations
Figure 2: Kingfisher deposit long-section - looking west
Sunbird deposit
Drilling has now extended mineralization approximately 700 meters to the south beyond the limit of the current underground Inferred Resource and some 600 meters below surface.
Drilling highlights include:
| SGRD2207: | 8.3 g/t Au 6.0 g/t Au | over an estimated true width of 3.5 meters from 250 meters over an estimated true width of 4.2 meters from 301 meters |
| SGRD2208: | 9.3 g/t Au 60.5 g/t Au 7.5 g/t Au 17.4 g/t Au | over an estimated true width of 5.6 meters from 583 meters, including over an estimated true width of 0.7 meters from 585 meters over an estimated true width of 2.1 meters from 595 meters, including over an estimated true width of 0.7 meters from 595 meters |
| SGRD2211: | 3.9 g/t Au 38.0 g/t Au | over an estimated true width of 23.8 meters from 648 meters, including over an estimated true width of 1.4 meters from 670 meters |
| SGRD2212: | 6.3 g/t Au 12.6 g/t Au 29.1 g/t Au | over an estimated true width of 22.4 meters from 339 meters, including over an estimated true width of 1.4 meters from 342 meters and over an estimated true width of 2.1 meters from 345 meters |
| SGRD2214: | 4.6 g/t Au | over an estimated true width of 7.0 meters from 370 meters |
| SGRD2215: | 4.3 g/t Au 45.8 g/t Au | over an estimated true width of 23.1 meters from 733 meters, including over an estimated true width of 0.7 meters from 735 meters |
Results from a further 10 holes, totaling 5,120 meters of a planned 12,000-meter drilling program have been received, including an interval of 4.3 g/t Au over a true width of 23.1 meters from 733 meters in drill hole SGRD2215, which is the deepest intersection drilled at Séguéla (refer to Figure 3).
The last phase of the current program will step out above and below the current intersection to further refine the geometry and controls on the interpreted mineralized shoot during the second quarter of 2025.
Figure 3: Sunbird long section - looking west
Refer to Appendix 1 for full details of the drill holes and assay results for this drill program at the Séguéla Gold Mine.
Quality Assurance & Quality Control (QA - QC)
All drilling data completed by the Company utilized the following procedures and methodologies. All drilling was carried out under the supervision of the Company’s personnel.
All reverse circulation (RC) drilling used a 5.25-inch face sampling pneumatic hammer with samples collected into 60-liter plastic bags. Samples were kept dry by maintaining enough air pressure to exclude groundwater inflow. If water ingress exceeded the air pressure, RC drilling was stopped, and drilling converted to diamond core tails. Once collected, RC samples were riffle split through a three-tier splitter to yield a 12.5 percent representative sample for submission to the analytical laboratory. The residual 87.5 percent samples were stored at the drill site until assay results were received and validated. Coarse reject samples for all mineralized samples corresponding to significant intervals are retained and stored on-site at the Company-controlled core yard.
All diamond drilling (DD) drill holes started with HQ sized diameter, before reducing to NQ diameter diamond drill bits on intersecting fresh rock. The core was logged, marked up for sampling using standard lengths of one meter or to a geological boundary. Samples were then cut into equal halves using a diamond saw. One half of the core was left in the original core box and stored in a secure location at the Company core yard at the project site. The other half was sampled, catalogued, and placed into sealed bags and securely stored at the site until shipment.
All RC and DD samples were transported to ALS’s preparation laboratory in Yamoussoukro, Côte d’Ivoire, before also being transported via commercial courier to ALS’s facility in Ouagadougou, Burkina Faso. Routine gold analysis using a 50-gram charge and fire assay with an atomic absorption finish was completed for all samples. Quality control procedures included the systematic insertion of blanks, duplicates and sample standards into the sample stream. In addition, the ALS laboratory inserted its own quality control samples.
Qualified Person
Paul Weedon, Senior Vice President, Exploration for Fortuna Mining Corp., is a Qualified Person as defined by National Instrument 43-101 being a member of the Australian Institute of Geoscientists (Membership #6001). Mr. Weedon has reviewed and approved the scientific and technical information contained in this news release. Mr. Weedon has verified the data disclosed, including the sampling, analytical and test data underlying the information or opinions contained herein by reviewing geochemical and geological databases and reviewing diamond drill core. There were no limitations to the verification process.
About Fortuna Mining Corp.
Fortuna Mining Corp. is a Canadian precious metals mining company with four operating mines and exploration activities in Argentina, Burkina Faso, Côte d’Ivoire, Mexico and Peru, as well as the Diamba Sud Gold Project located in Senegal. Sustainability is integral to all our operations and relationships. We produce gold and silver and generate shared value over the long-term for our stakeholders through efficient production, environmental protection, and social responsibility. For more information, please visit our website.
ON BEHALF OF THE BOARD
Jorge A. Ganoza
President, CEO, and Director
Fortuna Mining Corp.
Investor Relations:
Carlos Baca | info@fmcmail.com | fortunamining.com | X | LinkedIn | YouTube
Forward-looking Statements
This news release contains forward-looking statements which constitute “forward-looking information” within the meaning of applicable Canadian securities legislation and “forward-looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995 (collectively, “Forward-looking Statements”). All statements included herein, other than statements of historical fact, are Forward-looking Statements and are subject to a variety of known and unknown risks and uncertainties which could cause actual events or results to differ materially from those reflected in the Forward-looking Statements. The Forward-looking Statements in this news release include, without limitation, statements about further extension potential at the Kingfisher and Sunbird deposits; statements that the Sunbird deposit continues to support underground mining potential; the Company’s expectations regarding drilling in the second quarter of 2025 to step out and above of the current interception to refine the geology and controls on the intercepted mineralized shoot at the Sunbird deposit; mineral reserve and mineral resource estimates; expectations regarding additional drilling and exploration programs planned; the Company’s business strategy, plans and outlook; the merit of the Company’s mines and mineral properties; mineral resource and reserve estimates; timelines; the future financial or operating performance of the Company; expenditures; approvals and other matters. Often, but not always, these Forward-looking Statements can be identified by the use of words such as “estimated”, “potential”, “open”, “future”, “assumed”, “projected”, “used”, “detailed”, “has been”, “gain”, “planned”, “reflecting”, “will”, “containing”, “remaining”, “to be”, or statements that events, “could” or “should” occur or be achieved and similar expressions, including negative variations. Forward-looking Statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any results, performance or achievements expressed or implied by the Forward-looking Statements. Such uncertainties and factors include, among others, changes in general economic conditions and financial markets; changes in prices for gold, silver, and other metals; the timing and success of the Company’s proposed exploration programs; technological and operational hazards in Fortuna’s mining and mine development activities; risks inherent in mineral exploration; fluctuations in prices for energy, labor, materials, supplies and services; fluctuations in currencies; uncertainties inherent in the estimation of mineral reserves, mineral resources, and metal recoveries; the Company’s ability to obtain all necessary permits, licenses and regulatory approvals in a timely manner; governmental and other approvals; political unrest or instability in countries where Fortuna is active; labor relations issues; as well as those factors discussed under “Risk Factors” in the Company's Annual Information Form for the financial year ended December 31, 2023. Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in Forward-looking Statements, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended. Forward-looking Statements contained herein are based on the assumptions, beliefs, expectations and opinions of management, including but not limited to expectations regarding the results from the exploration programs conducted at the Company’s mineral properties including the Séguéla Mine; expected trends in mineral prices and currency exchange rates; the accuracy of the Company’s information derived from its exploration programs at the Company’s mineral properties; current mineral resource and reserve estimates; the presence and continuity of mineralization at the Company’s properties; that the Company’s activities will be in accordance with the Company’s public statements and stated goals; that there will be no material adverse change affecting the Company or its properties; that all required approvals will be obtained; that there will be no significant disruptions affecting operations and such other assumptions as set out herein. Forward-looking Statements are made as of the date hereof and the Company disclaims any obligation to update any Forward-looking Statements, whether as a result of new information, future events or results or otherwise, except as required by law. There can be no assurance that Forward-looking Statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, investors should not place undue reliance on Forward-looking Statements.
Cautionary Note to United States Investors Concerning Estimates of Reserves and Resources
Reserve and resource estimates included in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy, and Petroleum Definition Standards on Mineral Resources and Mineral Reserves. NI 43-101 is a rule developed by the Canadian Securities Administrators that establishes standards for public disclosure by a Canadian company of scientific and technical information concerning mineral projects. Unless otherwise indicated, all mineral reserve and mineral resource estimates contained in the technical disclosure have been prepared in accordance with NI 43-101 and the Canadian Institute of Mining, Metallurgy and Petroleum Definition Standards on Mineral Resources and Reserves. Canadian standards, including NI 43-101, differ significantly from the requirements of the Securities and Exchange Commission, and mineral reserve and resource information included in this news release may not be comparable to similar information disclosed by U.S. companies.
Appendix 1
Séguéla Mine drill program details of the drill holes and assay results for the Kingfisher and Sunbird deposits
Kingfisher deposit
| HoleID | Easting (WGS84_29N) | Northing (WGS84_29N) | Elevation (m) | EOH1,2 Depth (m) | UTM Azimuth | Dip | Depth2,3 From (m) | Depth2 To (m) | Drilled2 Width (m) | ETW4 (m) | Au (ppm) | Hole Type5 | Area |
| SGRD2131 | 743746 | 892908 | 428 | 199.6 | 90 | -60 | 159 | 169 | 10 | 8.5 | 0.8 | RCD | Kingfisher |
| 178 | 190 | 12 | 10.2 | 3.9 | RCD | Kingfisher | |||||||
| incl | 184 | 185 | 1 | 0.9 | 21.2 | RCD | Kingfisher | ||||||
| SGRD2135 | 743631 | 892500 | 414 | 220 | 90 | -60 | NSI | RCD | Kingfisher | ||||
| SGRD2137 | 743719 | 892906 | 429 | 260.2 | 90 | -60 | 204 | 213 | 9 | 7.7 | 1.0 | RCD | Kingfisher |
| SGRD2138 | 743580 | 892500 | 426 | 290 | 90 | -60 | 192 | 197 | 5 | 4.3 | 1.6 | RCD | Kingfisher |
| SGRD2139 | 743584 | 892546 | 430 | 105 | 90 | -60 | NSI | RCD | Kingfisher | ||||
| SGRD2146 | 743584 | 892545 | 430 | 291.3 | 90 | -60 | 218 | 230 | 12 | 10.2 | 1.1 | RCD | Kingfisher |
| SGRC2147 | 743604 | 892802 | 429 | 60.0 | 90 | -60 | Abandon | RC | Kingfisher | ||||
| SGRD2148 | 743772 | 893004 | 413 | 228 | 90 | -60 | 161 | 179 | 18 | 15.3 | 0.9 | RCD | Kingfisher |
| SGRD2149 | 743570 | 892395 | 422 | 295 | 90 | -60 | 187 | 195 | 8 | 6.8 | 4.1 | RCD | Kingfisher |
| incl | 190 | 191 | 1 | 0.9 | 25.6 | RCD | Kingfisher | ||||||
| 200 | 204 | 4 | 3.4 | 3.5 | RCD | Kingfisher | |||||||
| incl | 201 | 202 | 1 | 0.9 | 11.4 | RCD | Kingfisher | ||||||
| SGRD2150 | 743604 | 892802 | 429 | 370.4 | 90 | -60 | 266 | 297 | 31 | 26.4 | 2.4 | RCD | Kingfisher |
| incl | 267 | 268 | 1 | 0.9 | 16.1 | RCD | Kingfisher | ||||||
| SGRD2151 | 743526 | 892592 | 445 | 330 | 90 | -60 | NSI | RCD | Kingfisher | ||||
| SGRD2152 | 743836 | 893102 | 414 | 160.3 | 90 | -60 | 121 | 127 | 6 | 5.1 | 2.3 | RCD | Kingfisher |
| SGRD2153 | 743718 | 892955 | 429 | 291.3 | 90 | -60 | 223 | 234 | 11 | 9.4 | 10.6 | RCD | Kingfisher |
| incl | 223 | 224 | 1 | 0.9 | 65.9 | RCD | Kingfisher | ||||||
| and | 227 | 228 | 1 | 0.9 | 44.8 | RCD | Kingfisher | ||||||
| SGRD2154 | 743456 | 892592 | 463 | 399 | 90 | -60 | 384 | 388 | 4 | 3.4 | 2.6 | RCD | Kingfisher |
| SGRD2155 | 743808 | 893102 | 413 | 201.3 | 90 | -60 | 135 | 138 | 3 | 2.6 | 1.8 | RCD | Kingfisher |
| 164 | 168 | 4 | 3.4 | 1.3 | RCD | Kingfisher | |||||||
| SGRD2156 | 743617 | 892000 | 439 | 168 | 90 | -60 | 69 | 81 | 12 | 10.2 | 0.5 | RCD | Kingfisher |
| SGRD2157 | 743828 | 893200 | 427 | 150 | 90 | -60 | NSI | RCD | Kingfisher | ||||
| SGRC2252 | 743868 | 892982 | 375 | 61 | 90 | -60 | 22 | 33 | 11 | 9.4 | 1.7 | RC | Kingfisher |
| SGRC2253 | 743889 | 892981 | 389 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2254 | 743894 | 893031 | 393 | 36 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2255 | 743850 | 892732 | 366 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2256 | 743701 | 892480 | 382 | 66 | 90 | -60 | 37 | 39 | 2 | 1.7 | 4.6 | RC | Kingfisher |
| SGRC2257 | 743802 | 892731 | 388 | 100 | 90 | -60 | 12 | 25 | 13 | 11.1 | 1.7 | RC | Kingfisher |
| 36 | 55 | 19 | 16.2 | 0.7 | RC | Kingfisher | |||||||
| SGRC2258 | 743888 | 892936 | 373 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2259 | 743858 | 892936 | 378 | 60 | 90 | -60 | 35 | 44 | 9 | 7.7 | 2.7 | RC | Kingfisher |
| SGRC2260 | 743827 | 892733 | 368 | 61 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2261 | 734802 | 892887 | 398 | 90 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2262 | 743827 | 892888 | 394 | 86 | 90 | -60 | 67 | 68 | 1 | 0.9 | 5.4 | RC | Kingfisher |
| SGRC2263 | 743772 | 892730 | 388 | 126 | 90 | -60 | 65 | 76 | 11 | 9.4 | 0.6 | RC | Kingfisher |
| 85 | 105 | 20 | 17.0 | 3.6 | RC | Kingfisher | |||||||
| incl | 97 | 98 | 1 | 0.9 | 11.1 | RC | Kingfisher | ||||||
| and | 102 | 103 | 1 | 0.9 | 27.2 | RC | Kingfisher | ||||||
| SGRC2264 | 743853 | 892888 | 391 | 54 | 90 | -60 | 10 | 27 | 17 | 14.5 | 8.4 | RC | Kingfisher |
| incl | 19 | 21 | 2 | 1.7 | 62.6 | RC | Kingfisher | ||||||
| 31 | 38 | 7 | 6.0 | 6.9 | RC | Kingfisher | |||||||
| incl | 31 | 32 | 1 | 0.9 | 43.2 | RC | Kingfisher | ||||||
| SGRC2265 | 743852 | 892833 | 389 | 61 | 90 | -60 | 20 | 31 | 11 | 9.4 | 1.3 | RC | Kingfisher |
| SGRC2266 | 743825 | 892834 | 389 | 80 | 90 | -60 | 21 | 33 | 12 | 10.2 | 1.4 | RC | Kingfisher |
| 55 | 66 | 11 | 9.4 | 1.7 | RC | Kingfisher | |||||||
| SGRC2267 | 743799 | 892832 | 389 | 113 | 90 | -60 | 41 | 61 | 20 | 17.0 | 0.7 | RC | Kingfisher |
| 70 | 73 | 3 | 2.6 | 1.8 | RC | Kingfisher | |||||||
| 82 | 104 | 22 | 18.7 | 0.9 | RC | Kingfisher | |||||||
| SGRC2268 | 743750 | 892679 | 390 | 134 | 90 | -60 | 82 | 109 | 27 | 23.0 | 3.4 | RC | Kingfisher |
| incl | 95 | 97 | 2 | 1.7 | 27.5 | RC | Kingfisher | ||||||
| SGRC2269 | 743774 | 892835 | 393 | 133 | 90 | -60 | 87 | 99 | 12 | 10.2 | 0.9 | RC | Kingfisher |
| 118 | 127 | 9 | 7.7 | 1.2 | RC | Kingfisher | |||||||
| SGRC2270 | 743773 | 892680 | 388 | 88 | 90 | -60 | 33 | 36 | 3 | 2.6 | 3.9 | RC | Kingfisher |
| 57 | 72 | 15 | 12.8 | 5.3 | RC | Kingfisher | |||||||
| incl | 67 | 69 | 2 | 1.7 | 34.8 | RC | Kingfisher | ||||||
| SGRC2271 | 743750 | 892835 | 414 | 36 | 90 | -60 | Abandon | RC | Kingfisher | ||||
| SGRC2273 | 743824 | 892682 | 382 | 70 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRD2275 | 743747 | 892778 | 392 | 150 | 90 | -60 | 122 | 148 | 26 | 22.1 | 3.2 | RCD | Kingfisher |
| incl | 138 | 139 | 1 | 0.9 | 13.7 | RCD | Kingfisher | ||||||
| and | 145 | 146 | 1 | 0.9 | 27.4 | RCD | Kingfisher | ||||||
| SGRC2276 | 743726 | 892478 | 379 | 110 | 90 | -60 | 41 | 66 | 25 | 21.3 | 1.8 | RC | Kingfisher |
| incl | 60 | 61 | 1 | 0.9 | 13.6 | RC | Kingfisher | ||||||
| SGRD2277 | 743799 | 892681 | 385 | 90 | 90 | -60 | 15 | 30 | 15 | 12.8 | 1.1 | RCD | Kingfisher |
| SGRC2278 | 743701 | 892480 | 382 | 132 | 90 | -60 | 54 | 65 | 11 | 9.4 | 2.6 | RC | Kingfisher |
| 74 | 76 | 2 | 1.7 | 5.0 | RC | Kingfisher | |||||||
| 91 | 128 | 37 | 31.5 | 7.2 | RC | Kingfisher | |||||||
| incl | 109 | 110 | 1 | 0.9 | 13.5 | RC | Kingfisher | ||||||
| and | 114 | 115 | 1 | 0.9 | 18.7 | RC | Kingfisher | ||||||
| and | 118 | 120 | 2 | 1.7 | 28.9 | RC | Kingfisher | ||||||
| and | 123 | 124 | 1 | 0.9 | 128.9 | RC | Kingfisher | ||||||
| and | 125 | 126 | 1 | 0.9 | 10.8 | RC | Kingfisher | ||||||
| SGRC2279 | 743776 | 892783 | 393 | 120 | 90 | -60 | 72 | 109 | 37 | 31.5 | 1.2 | RC | Kingfisher |
| SGRD2280 | 743725 | 892629 | 397 | 151 | 90 | -60 | 89 | 108 | 19 | 16.2 | 8.1 | RCD | Kingfisher |
| incl | 96 | 100 | 4 | 3.4 | 18.7 | RCD | Kingfisher | ||||||
| and | 106 | 108 | 2 | 1.7 | 24.6 | RCD | Kingfisher | ||||||
| and | 112 | 114 | 2 | 1.7 | 6.2 | RCD | Kingfisher | ||||||
| incl | 113 | 114 | 1 | 0.9 | 11.8 | RCD | Kingfisher | ||||||
| SGRC2281 | 743798 | 892477 | 383 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2282 | 743751 | 892631 | 395 | 117 | 90 | -60 | 58 | 75 | 17 | 14.5 | 1.2 | RC | Kingfisher |
| 79 | 87 | 8 | 6.8 | 3.6 | RC | Kingfisher | |||||||
| incl | 79 | 80 | 1 | 0.9 | 19.1 | RC | Kingfisher | ||||||
| SGRC2283 | 743776 | 892478 | 399 | 70 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2284 | 743773 | 892631 | 390 | 100 | 90 | -60 | 33 | 48 | 15 | 12.8 | 1.0 | RC | Kingfisher |
| SGRC2285 | 743725 | 892430 | 383 | 102 | 90 | -60 | 33 | 75 | 42 | 35.7 | 2.5 | RC | Kingfisher |
| incl | 36 | 37 | 1 | 0.9 | 11.0 | RC | Kingfisher | ||||||
| and | 53 | 54 | 1 | 0.9 | 11.6 | RC | Kingfisher | ||||||
| and | 65 | 66 | 1 | 0.9 | 13.2 | RC | Kingfisher | ||||||
| SGRC2286 | 743801 | 892801 | 391 | 86 | 90 | -60 | 66 | 77 | 11 | 9.4 | 0.8 | RC | Kingfisher |
| SGRC2287 | 743800 | 892631 | 386 | 81 | 90 | -60 | 2 | 12 | 10 | 8.5 | 6.7 | RC | Kingfisher |
| incl | 5 | 6 | 1 | 0.9 | 30.3 | RC | Kingfisher | ||||||
| and | 9 | 10 | 1 | 0.9 | 16.1 | RC | Kingfisher | ||||||
| SGRC2288 | 743775 | 892428 | 380 | 60 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2289 | 743751 | 892433 | 379 | 80 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2290 | 743802 | 892581 | 385 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2291 | 743799 | 892429 | 379 | 40 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2292 | 743776 | 892583 | 380 | 70 | 90 | -60 | 3 | 16 | 13 | 11.1 | 0.8 | RC | Kingfisher |
| SGRC2293 | 743751 | 892581 | 383 | 97 | 90 | -60 | 34 | 56 | 22 | 18.7 | 2.1 | RC | Kingfisher |
| incl | 52 | 53 | 1 | 0.9 | 13.6 | RC | Kingfisher | ||||||
| and | 55 | 56 | 1 | 0.9 | 11.6 | RC | Kingfisher | ||||||
| SGRC2295 | 743751 | 892479 | 382 | 90 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2296 | 743824 | 892781 | 390 | 80 | 90 | -60 | 2 | 8 | 6 | 5.1 | 1.0 | RC | Kingfisher |
| 19 | 39 | 20 | 17.0 | 0.9 | RC | Kingfisher | |||||||
| SGRC2297 | 743852 | 892782 | 382 | 60 | 90 | -60 | 3 | 18 | 15 | 12.8 | 1.0 | RC | Kingfisher |
| SGRC2298 | 743725 | 892582 | 391 | 132 | 90 | -60 | 66 | 79 | 13 | 11.1 | 1.5 | RC | Kingfisher |
| incl | 78 | 79 | 1 | 0.9 | 10.3 | RC | Kingfisher | ||||||
| SGRC2299 | 743800 | 892532 | 377 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2300 | 743775 | 892531 | 379 | 70 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2302 | 743779 | 892379 | 376 | 36 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2303 | 743752 | 892380 | 377 | 60 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2304 | 743751 | 892730 | 391 | 135 | 90 | -60 | 19 | 20 | 1 | 0.9 | 5.6 | RC | Kingfisher |
| 74 | 80 | 6 | 5.1 | 1.3 | RC | Kingfisher | |||||||
| 90 | 132 | 42 | 35.7 | 2.7 | RC | Kingfisher | |||||||
| incl | 118 | 119 | 1 | 0.9 | 23.1 | RC | Kingfisher | ||||||
| and | 130 | 131 | 1 | 0.9 | 33.9 | RC | Kingfisher | ||||||
| SGRC2306 | 743752 | 892528 | 383 | 90 | 90 | -60 | 22 | 29 | 7 | 6.0 | 1.1 | RC | Kingfisher |
| SGRC2307 | 743728 | 892528 | 388 | 110 | 90 | -60 | 48 | 59 | 11 | 9.4 | 1.0 | RC | Kingfisher |
| 76 | 85 | 9 | 7.7 | 2.8 | RC | Kingfisher | |||||||
| SGRC2308 | 743726 | 892380 | 377 | 80 | 90 | -60 | 19 | 36 | 17 | 14.5 | 2.3 | RC | Kingfisher |
| incl | 34 | 35 | 1 | 0.9 | 14.0 | RC | Kingfisher | ||||||
| SGRC2309 | 743701 | 892380 | 381 | 104 | 90 | -60 | 46 | 88 | 42 | 35.7 | 3.3 | RC | Kingfisher |
| incl | 71 | 72 | 1 | 0.9 | 12.1 | RC | Kingfisher | ||||||
| and | 74 | 75 | 1 | 0.9 | 26.2 | RC | Kingfisher | ||||||
| and | 79 | 80 | 1 | 0.9 | 18.1 | RC | Kingfisher | ||||||
| and | 82 | 83 | 1 | 0.9 | 18.3 | RC | Kingfisher | ||||||
| SGRC2311 | 743674 | 892379 | 383 | 111 | 90 | -60 | 42 | 48 | 6 | 5.1 | 1.7 | RC | Kingfisher |
| 70 | 74 | 4 | 3.4 | 2.2 | RC | Kingfisher | |||||||
| 78 | 95 | 17 | 14.5 | 0.7 | RC | Kingfisher | |||||||
| 99 | 105 | 6 | 5.1 | 1.0 | RC | Kingfisher | |||||||
| SGRC2312 | 743700 | 892530 | 390 | 150 | 90 | -60 | 72 | 78 | 6 | 5.1 | 1.4 | RC | Kingfisher |
| 86 | 132 | 46 | 39.1 | 3.8 | RC | Kingfisher | |||||||
| incl | 104 | 105 | 1 | 0.9 | 13.1 | RC | Kingfisher | ||||||
| and | 110 | 111 | 1 | 0.9 | 11.6 | RC | Kingfisher | ||||||
| and | 123 | 125 | 2 | 1.7 | 44.2 | RC | Kingfisher | ||||||
| SGRC2314 | 743776 | 892330 | 376 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2315 | 743749 | 892331 | 377 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2316 | 743726 | 892330 | 379 | 70 | 90 | -60 | 6 | 10 | 4 | 3.4 | 1.9 | RC | Kingfisher |
| SGRC2317 | 743700 | 892581 | 396 | 130 | 90 | -60 | 97 | 120 | 23 | 19.6 | 2.1 | RC | Kingfisher |
| SGRC2318 | 743700 | 892328 | 380 | 90 | 90 | -60 | 36 | 70 | 34 | 28.9 | 2.2 | RC | Kingfisher |
| incl | 52 | 53 | 1 | 0.9 | 23.6 | RC | Kingfisher | ||||||
| SGRC2320 | 743674 | 892330 | 399 | 108 | 90 | -60 | 36 | 43 | 7 | 6.0 | 1.0 | RC | Kingfisher |
| 64 | 78 | 14 | 11.9 | 1.3 | RC | Kingfisher | |||||||
| 82 | 108 | 26 | 22.1 | 1.6 | RC | Kingfisher | |||||||
| incl | 102 | 103 | 1 | 0.9 | 11.6 | RC | Kingfisher | ||||||
| SGRC2322 | 743676 | 892482 | 387 | 156 | 90 | -60 | 108 | 130 | 22 | 18.7 | 2.1 | RC | Kingfisher |
| 140 | 154 | 14 | 11.9 | 7.9 | RC | Kingfisher | |||||||
| incl | 144 | 145 | 1 | 0.9 | 15.0 | RC | Kingfisher | ||||||
| and | 149 | 150 | 1 | 0.9 | 68.5 | RC | Kingfisher | ||||||
| SGRC2325 | 743775 | 892278 | 375 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2328 | 743753 | 892279 | 369 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2329 | 743725 | 892277 | 377 | 70 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2330 | 743748 | 892226 | 375 | 40 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRD2331 | 743649 | 892380 | 377 | 150 | 90 | -60 | 70 | 73 | 3 | 2.6 | 5.0 | RCD | Kingfisher |
| SGRD2332 | 743675 | 892531 | 405 | 174 | 90 | -60 | 101 | 124 | 23 | 19.6 | 2.1 | RCD | Kingfisher |
| incl | 109 | 110 | 1 | 0.9 | 10.8 | RCD | Kingfisher | ||||||
| 158 | 163 | 5 | 4.3 | 1.8 | RCD | Kingfisher | |||||||
| SGRC2334 | 743725 | 892229 | 377 | 60 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2336 | 743701 | 892230 | 388 | 80 | 90 | -60 | 15 | 29 | 14 | 11.9 | 1.2 | RC | Kingfisher |
| 37 | 51 | 14 | 11.9 | 2.2 | RC | Kingfisher | |||||||
| incl | 48 | 49 | 1 | 0.9 | 15.3 | RC | Kingfisher | ||||||
| SGRC2337 | 743675 | 892231 | 390 | 100 | 90 | -60 | 43 | 74 | 31 | 26.4 | 3.5 | RC | Kingfisher |
| incl | 44 | 45 | 1 | 0.9 | 18.7 | RC | Kingfisher | ||||||
| and | 52 | 54 | 2 | 1.7 | 10.7 | RC | Kingfisher | ||||||
| 78 | 91 | 13 | 11.1 | 2.6 | RC | Kingfisher | |||||||
| incl | 81 | 82 | 1 | 0.9 | 13.4 | RC | Kingfisher | ||||||
| SGRD2341 | 743624 | 892232 | 391 | 132 | 90 | -60 | 80 | 97 | 17 | 14.5 | 1.5 | RCD | Kingfisher |
| SGRC2342 | 743752 | 892182 | 376 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2343 | 743726 | 892182 | 377 | 50 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2344 | 743700 | 892179 | 378 | 70 | 90 | -60 | 10 | 14 | 4 | 3.4 | 2.2 | RC | Kingfisher |
| 18 | 40 | 22 | 18.7 | 3.9 | RC | Kingfisher | |||||||
| incl | 24 | 25 | 1 | 0.9 | 23.7 | RC | Kingfisher | ||||||
| and | 28 | 29 | 1 | 0.9 | 14.8 | RC | Kingfisher | ||||||
| and | 35 | 36 | 1 | 0.9 | 20.7 | RC | Kingfisher | ||||||
| SGRC2345 | 743679 | 892179 | 391 | 94 | 90 | -60 | 34 | 71 | 37 | 31.5 | 3.1 | RC | Kingfisher |
| incl | 35 | 38 | 3 | 2.6 | 18.1 | RC | Kingfisher | ||||||
| SGRC2346 | 743650 | 892179 | 381 | 112 | 90 | -60 | 53 | 54 | 1 | 0.9 | 6.7 | RC | Kingfisher |
| 59 | 78 | 19 | 16.2 | 3.7 | RC | Kingfisher | |||||||
| incl | 71 | 73 | 2 | 1.7 | 24.0 | RC | Kingfisher | ||||||
| SGRC2348 | 743602 | 892181 | 403 | 153 | 90 | -60 | 90 | 103 | 13 | 11.1 | 1.4 | RC | Kingfisher |
| 114 | 119 | 5 | 4.3 | 1.5 | RC | Kingfisher | |||||||
| 126 | 134 | 8 | 6.8 | 1.9 | RC | Kingfisher | |||||||
| SGRC2351 | 743725 | 892132 | 405 | 30 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2352 | 743701 | 892131 | 405 | 72 | 90 | -60 | 12 | 32 | 20 | 17.0 | 3.7 | RC | Kingfisher |
| incl | 22 | 23 | 1 | 0.9 | 12.0 | RC | Kingfisher | ||||||
| and | 26 | 27 | 1 | 0.9 | 16.7 | RC | Kingfisher | ||||||
| and | 28 | 29 | 1 | 0.9 | 13.7 | RC | Kingfisher | ||||||
| SGRC2355 | 743721 | 892075 | 388 | 34 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2356 | 743698 | 892074 | 387 | 40 | 90 | -60 | NSI | RC | Kingfisher | ||||
| SGRC2357 | 743676 | 892076 | 386 | 74 | 90 | -60 | 35 | 49 | 14 | 11.9 | 1.0 | RC | Kingfisher |
Notes:
1. EOH: End of hole
2. Depths and widths reported to nearest significant decimal place
3. NSI: No significant intercepts
4. ETW: Estimated true width
5. RC: reverse circulation drilling | DD: diamond drilling tail | RCD: reverse circulation drilling with diamond tail
Sunbird deposit
| HoleID | Easting (WGS84_29N) | Northing (WGS84_29N) | Elevation (m) | EOH1,2 Depth (m) | UTM Azimuth | Dip | Depth2,3 From (m) | Depth2 To (m) | Drilled2 Width (m) | ETW4 (m) | Au (ppm) | Hole Type5 | Area |
| SGRD2205 | 742500 | 892435 | 554 | 450.2 | 90 | -60 | 363 | 374 | 11 | 7.7 | 2.2 | RCD | Sunbird |
| 406 | 414 | 8 | 5.6 | 3.3 | RCD | Sunbird | |||||||
| incl | 407 | 408 | 1 | 0.7 | 11.0 | RCD | Sunbird | ||||||
| 423 | 426 | 3 | 2.1 | 4.8 | RCD | Sunbird | |||||||
| incl | 425 | 426 | 1 | 0.7 | 11.2 | RCD | Sunbird | ||||||
| 434 | 440 | 6 | 4.2 | 2.4 | RCD | Sunbird | |||||||
| SGRD2206 | 742505 | 892550 | 553 | 456.1 | 90 | -60 | 351 | 352 | 1 | 0.7 | 12.2 | RCD | Sunbird |
| 444 | 448 | 4 | 2.8 | 2.3 | RCD | Sunbird | |||||||
| SGRD2207 | 742565 | 892485 | 565 | 370.2 | 90 | -60 | 250 | 255 | 5 | 3.5 | 8.3 | RCD | Sunbird |
| incl | 250 | 251 | 1 | 0.7 | 16.8 | RCD | Sunbird | ||||||
| and | 252 | 253 | 1 | 0.7 | 10.9 | RCD | Sunbird | ||||||
| 281 | 286 | 5 | 3.5 | 3.3 | RCD | Sunbird | |||||||
| incl | 284 | 285 | 1 | 0.7 | 10.9 | RCD | Sunbird | ||||||
| 301 | 307 | 6 | 4.2 | 6.0 | RCD | Sunbird | |||||||
| incl | 304 | 305 | 1 | 0.7 | 11.2 | RCD | Sunbird | ||||||
| SGRD2208 | 742370 | 892125 | 596 | 630.1 | 90 | -60 | 561 | 572 | 11 | 7.7 | 2.9 | RCD | Sunbird |
| incl | 570 | 571 | 1 | 0.7 | 15.0 | RCD | Sunbird | ||||||
| 583 | 591 | 8 | 5.6 | 9.3 | RCD | Sunbird | |||||||
| incl | 585 | 586 | 1 | 0.7 | 60.5 | RCD | Sunbird | ||||||
| 595 | 598 | 3 | 2.1 | 7.5 | RCD | Sunbird | |||||||
| incl | 595 | 596 | 1 | 0.7 | 17.4 | RCD | Sunbird | ||||||
| SGRD2209 | 742445 | 892335 | 567 | 500.2 | 90 | -60 | 466 | 482 | 16 | 11.2 | 1.9 | RCD | Sunbird |
| SGRD2211 | 742324 | 892026 | 603 | 708 | 90 | -60 | 214 | 217 | 3 | 2.1 | 2.9 | RCD | Sunbird |
| 648 | 682 | 34 | 23.8 | 3.9 | RCD | Sunbird | |||||||
| incl | 670 | 672 | 2 | 1.4 | 38.0 | RCD | Sunbird | ||||||
| 688 | 690 | 2 | 1.4 | 3.9 | RCD | Sunbird | |||||||
| SGRD2212 | 742540 | 892510 | 563 | 405 | 90 | -60 | 339 | 371 | 32 | 22.4 | 6.3 | RCD | Sunbird |
| incl | 342 | 344 | 2 | 1.4 | 12.6 | RCD | Sunbird | ||||||
| and | 345 | 348 | 3 | 2.1 | 29.1 | RCD | Sunbird | ||||||
| and | 349 | 350 | 1 | 0.7 | 14.9 | RCD | Sunbird | ||||||
| and | 356 | 357 | 1 | 0.7 | 13.3 | RCD | Sunbird | ||||||
| SGRD2213 | 742575 | 892610 | 568 | 400.1 | 90 | -60 | 308 | 319 | 11 | 7.7 | 2.2 | RCD | Sunbird |
| SGRD2214 | 742500 | 892360 | 564 | 420 | 90 | -60 | 274 | 276 | 2 | 1.4 | 2.9 | RCD | Sunbird |
| 320 | 328 | 8 | 5.6 | 1.4 | RCD | Sunbird | |||||||
| 337 | 345 | 8 | 5.6 | 2.2 | RCD | Sunbird | |||||||
| incl | 337 | 338 | 1 | 0.7 | 13.8 | RCD | Sunbird | ||||||
| 354 | 362 | 8 | 5.6 | 2.4 | RCD | Sunbird | |||||||
| 370 | 380 | 10 | 7.0 | 4.6 | RCD | Sunbird | |||||||
| incl | 371 | 372 | 1 | 0.7 | 13.6 | RCD | Sunbird | ||||||
| and | 373 | 374 | 1 | 0.7 | 13.2 | RCD | Sunbird | ||||||
| SGRD2215 | 742280 | 891928 | 600 | 780 | 90 | -60 | 694 | 718 | 24 | 16.8 | 0.9 | RCD | Sunbird |
| 723 | 728 | 5 | 3.5 | 1.0 | RCD | Sunbird | |||||||
| 733 | 766 | 33 | 23.1 | 4.3 | RCD | Sunbird | |||||||
| incl | 735 | 736 | 1 | 0.7 | 45.8 | RCD | Sunbird | ||||||
| and | 741 | 742 | 1 | 0.7 | 10.4 | RCD | Sunbird | ||||||
| and | 745 | 746 | 1 | 0.7 | 14.9 | RCD | Sunbird | ||||||
Notes:
1. EOH: End of hole
2. Depths and widths reported to nearest significant decimal place
3. NSI: No significant intercepts
4. ETW: Estimated true width
5. RC: reverse circulation drilling | DD: diamond drilling tail | RCD: reverse circulation drilling with diamond tail
Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/bf784d28-59c1-43ef-b822-4428d673a584
https://www.globenewswire.com/NewsRoom/AttachmentNg/821a4021-e749-4f40-97f6-64f7b9c6646c
https://www.globenewswire.com/NewsRoom/AttachmentNg/3d21f56e-1cc1-4965-a4b0-3c2d69d49a2f
A PDF accompanying this announcement is available at
FAQ
What are the latest gold drilling results at Fortuna's (FSM) Kingfisher deposit?
How many meters has Fortuna (FSM) drilled at the Kingfisher deposit in 2025?
What is the deepest gold intersection at Fortuna's (FSM) Sunbird deposit?
When will Fortuna (FSM) convert Kingfisher resources to Mineral Reserves?
