Altamira Gold Drills 146m @ 1g/t Gold at the Intrusive-Hosted Maria Bonita Discovery, Cajueiro Project, Brazil
Altamira Gold announced results from 12 additional drill holes at the Maria Bonita gold discovery in the Cajueiro Project, Brazil.
Key highlights include MBA029, which returned 146m @ 1.0 g/t gold from 23m depth, with a peak value of 2.4 g/t gold. This hole also showcased a broader zone of 213m @ 0.8 g/t gold, suggesting the mineralized body remains open at depth.
Other significant results include:
MBA016: 90m @ 0.6 g/t Au from 14m
MBA018: 105m @ 0.5 g/t Au from 23m
MBA020: 72m @ 0.4 g/t Au from 59m
MBA022: 53m @ 0.7 g/t Au from surface
CEO Mike Bennett highlighted the continuity and depth of the mineralization, confirming it remains open to the north, south, and at depth.
The Cajueiro project has NI 43-101 resources of 5.66Mt @ 1.02 g/t gold (Indicated) and 12.66Mt @ 1.26 g/t gold (Inferred).
A three-dimensional geological model is being updated to guide future drilling and resource estimation.
- MBA029 drill hole returned 146m @ 1.0 g/t gold, part of a broader 213m @ 0.8 g/t gold zone.
- The mineralized body remains open at depth, indicating potential for further discoveries.
- Additional drill holes (MBA016, MBA018, MBA020, MBA022) reported significant gold intercepts.
- CEO Mike Bennett confirmed consistent gold values, enhancing the project's prospectivity.
- The Cajueiro project has NI 43-101 resources of 5.66Mt @ 1.02 g/t gold (Indicated) and 12.66Mt @ 1.26 g/t gold (Inferred).
- No significant high-grade gold values reported beyond the peak value of 2.4 g/t gold.
- Some drill holes reported lower gold grades, such as MBA020 (72m @ 0.4 g/t Au) and MBA025 (26m @ 0.5 g/t Au).
- The necessity for further drilling indicates that the full potential and economic viability are yet to be confirmed.
Vancouver, British Columbia--(Newsfile Corp. - May 22, 2024) - Altamira Gold Corp. (TSXV: ALTA) (FSE: T6UP) (OTC Pink: EQTRF), ("Altamira" or the "Company") is pleased to announce the results of 12 additional drill holes at the Maria Bonita gold discovery.
Highlights:
- MBA029 returned 146m @ 1.0 g/t gold from 23m depth in hydrothermally altered rhyolite intrusive rocks. This interval is part of a wider zone of mineralization with the entire hole returning 213m @ 0.8 g/t gold and terminating in mineralization, indicating the mineralized body remains open at depth.
- As with previous drill intercepts, the gold values in MBA029 are remarkably consistent with a peak value of 2.4g/t gold. The collar of drill hole MBA029 is located 85m south-east of the original discovery holes and extends the known mineralization both to the north, south and to depth.
- Other significant drill results include:
- MBA016: 90m @ 0.6g/t Au from 14m and 65m @ 0.4g/t from 118m
- MBA018: 105m @ 0.5g/t Au from 23m and 24m @ 0.4g/t Au from 144m
- MBA020: 72m @ 0.4 g/t Au from 59m
- MBA022: 53m @ 0.7 g/t Au from surface
- MBA025: 26m @ 0.5 g/t Au from 68m and 40m @ 0.5g/t Au from 118m
- MBA027: 41m @ 0.4g/t Au from surface
CEO Mike Bennett commented; "This result is by far the best drill intercept to date at Maria Bonita and confirms the depth continuity and pervasive style of the mineralization. We have more than doubled the previous best depth extent to the mineralization. The consistency of gold values down-hole reinforces the presence of a significant disseminated mineralized system in intrusive rocks which is open to the north and south and at depth. It also enhances the prospectivity of the target and suggests a north-east plunge to the known zone of coherent mineralization at or around 1g/t gold. Maria Bonita is a "blind" discovery with no outcrop, and we are extremely encouraged to have now identified extensions to the core mineralized zone which gives us further drill targets to pursue."
CAJUEIRO PROJECT
The Cajueiro project is located approximately 75km NW of the town of Alta Floresta in the state of Mato Grosso (Figure 1) in central western Brazil and is easily accessible by road and has grid power and local water supply. Cajueiro is the most advanced of three key projects that Altamira controls in the region, the other two being Apiacas and Santa Helena (Figure1).
Figure 1: Location of the Cajueiro, Apiacas and Santa Helena projects.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_16c4e3fc7489cbdc_001full.jpg
The Cajueiro project has current NI 43-101 resources of 5.66Mt @ 1.02 g/t gold for a total of 185,000 oz in the Indicated Resource category and 12.66Mt @ 1.26 g/t gold for a total of 515,000 oz in the Inferred Resource category (estimated using a gold price of US
Maria Bonita Target
Maria Bonita is located 7km west of the Cajueiro mineral resource and is easily accessible by road. The current drill programmed is follow-up to the initial round of discovery drillholes which include 69m @ 1g/t gold (MBA005), 50m @ 1.1 g/t gold (MBA004), 55m @ 1.0 g/t gold (MBA002), 50m @ 1.0 g/t gold (MBA001) and 45m @ 1.4 g/t gold (MBA003) - all from surface (see press releases dated September 7, November 16, 2022, and January 18, 2023). The gold mineralization is notably uniform and pervasive in the initial discovery holes, with a peak assay value of 7.7 g/t Au. Initial metallurgical tests returned gold recoveries of
There is no outcrop in the project area, therefore this second drill programme is largely guided by the results of the prior drilling, plus ground magnetics and soil survey data. Prior soil surveys have defined a pronounced soil anomaly over 0.4 g/t gold, measuring 250m by 300m, within a larger trapezoid-shaped magnetic low, bounded by interpreted structures (see Figure 2 and the press release dated December 5, 2023). The extensive magnetic low may reflect the hydrothermally altered package of host mineralized intrusive rocks.
This second drill programme was planned to determine the limits to the known bedrock gold mineralization at Maria Bonita. To date, in the current programme, 19 diamond core drillholes have been completed for a total of 3,304 metres.
Table 1 and Figure 2 show the drillholes for which complete assay data is available.
Figure 2: Location of completed drillholes (white) and those reported in this release (yellow). Background shows interpreted significant structures within the broad trapezoid-shaped magnetic low that hosts the alteration and mineralization. The 400ppb gold-in-soil contour highlights the highest potential for sub-cropping mineralization.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_16c4e3fc7489cbdc_003full.jpg
Table 1: Summary drill collar data for diamond drillholes to date at Maria Bonita. Initial scout programme holes MBA001-009 and follow-up programme MBA010-029. Results area awaited for two drillholes (asterisked)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_052220241table1.jpg
Table 2: Summary drill results for diamond drillholes in the second drill programme
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_05222024table2.jpg
The drill programme was designed to step out from the original discovery area using the soil and auger data as a guide to bedrock gold distribution. The structures evident within the ground magnetic data (Figure 2) were thought to reflect the net effect of hydrothermal magnetite (positive anomalies) and de-magnetization associated with later hydrothermal overprint events - possibly related to the introduction of gold (negative anomalies).
The drill data show a general positive correlation between quartz vein intensity and gold in the rhyolite intrusive, however overlapping chlorite and sericite rich alteration events also influence gold content. A three-dimensional geological model has been constructed and updated as drill data has been received. This model is used to interpret the grade distribution in three dimensions as assays are received, allowing the drill plan to be updated accordingly.
Most drillholes intersected highly anomalous and relatively consistent gold over very thick intervals. Typically, these values were in the range 0.3 - 0.5g/t Au over 50-100m with the central zone containing consistent grades around 1g/t Au. The geometry of the core zone is a key focus in the ongoing interpretation as this will drive the economics of any future hard rock mineral resource.
The mineralizing event is likely to have consisted of more than one phase, overlapping in three dimensions. Prior petrological evidence from the demagnetisation of original magnetite in the quartz stockworks confirms the concept of a multi-phase hydrothermal system. In this scenario, interpretation of the alteration halos and style of veining is key to determining vectors towards potentially better grade.
The drill data will lead to a geological model in which the alteration and mineralization envelopes can be interpreted as the basis for a mineral resource estimate.
Figure 3: Multiple parallel quartz vein segregations in mineralized quartz porphyry intrusive from MBA029.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_16c4e3fc7489cbdc_006full.jpg
Figure 4: Schematic cross section (north-south) through the projection of MBA005 and MBA029. The deeper intercept of the higher-grade zone in MBA029 correlates with similar grade intervals in MBA015 and MBA005. In addition, the southern zone in MBA022 lies outside the 0.4g/t gold-in-soil contour (see Figure 2) and indicates that significant gold may be found under shallow cover outside the main soil anomaly.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/210063_16c4e3fc7489cbdc_007full.jpgFi
Following the observation of visible gold in some sections of the drill core, follow-up sampling is underway for selected core intervals using:
- screen fire assay - each sample consists of 1000g of crushed sample
- a non-destructive, neutron activation analytical method (400g of crushed sample)
These methods analyse a significantly larger sample than the conventional 50g fire assay, used routinely in the industry (and used to date by Altamira) and should reduce the statistical risk of missing particulate (visible) gold in zones where such gold is recorded or suspected. Results will be assessed as they are received.
The current drill results have successfully identified a broader and deeper mineralized zone than previously recognised from the initial round of drilling. The mineralization has been confirmed to have a three-dimensional form and to extend from surface to at least 213m downhole (174m below surface). Further drilling is now planned, using a rig on site, to further test the recent higher-grade and deeper discovery in hole MBA029 plus the zones of shallow mineralization that remain open such as that in hole MBA022 (Figure 4).
Qualified Person
Guillermo Hughes, FAIG and M AusIMM., a consultant to the Company as well as a Qualified Person as defined by National Instrument 43-101, supervised the preparation of the technical information in this news release.
About Altamira Gold Corp.
The Company is focused on the exploration and development of gold and copper projects within western central Brazil. The Company holds 6 projects comprising approximately 190,000 hectares, within the prolific Juruena gold belt which historically produced an estimated 7 to 10Moz of placer gold. The Company's advanced Cajueiro project has NI 43-101 resources of 5.66Mt @ 1.02 g/t gold for a total of 185,000 oz in the Indicated Resource category and 12.66Mt @ 1.26 g/t gold for a total of 515,000oz in the Inferred Resource category.
On Behalf of the Board of Directors,
ALTAMIRA GOLD CORP.
"Michael Bennett"
Michael Bennett
President & CEO
Tel: 604.676.5660
Toll-Free:1-833-606-6271
info@altamiragold.com
www.altamiragold.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
The securities described herein have not been registered under the U.S. Securities Act or any state securities laws, and may not be offered or sold in the United States absent registration or an applicable exemption from registration requirements under the U.S. Securities Act and any applicable state securities laws.
Forward-looking Statements
Certain information contained herein constitutes "forward-looking information" under Canadian securities legislation. Forward-looking information includes, but is not limited to, statements with respect to the extension of the Warrants. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "will", "intends" or variations of such words and phrases or statements that certain actions, events or results "will" occur. Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results to be materially different from those expressed or implied by such forward-looking statements or forward-looking information, including the receipt of all necessary regulatory approvals. Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. The Company will not update any forward-looking statements or forward-looking information that is incorporated by reference herein, except as required by applicable securities laws.
Notes
Gold analysis has been conducted by SGS method FAA505 (fire assay of 50g charge), with higher grade samples checked by FAA525. Analytical quality is monitored by certified references and blanks. Until dispatch, samples are stored under the supervision the Company's exploration office. The samples are couriered to the assay laboratory using a commercial contractor. Pulps are returned to the Company and archived. Drill holes results are quoted as down-hole length weighted intersections.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/210063
FAQ
What are the key drill results from Altamira Gold's Maria Bonita discovery?
What is the significance of the MBA029 drill hole for Altamira Gold?
What are the NI 43-101 resource estimates for Altamira Gold's Cajueiro project?
How does the recent drilling impact the Maria Bonita discovery's prospectivity?
What are the future plans for drilling at Altamira Gold's Maria Bonita site?
