Cadence Extends Battery Life and Improves User Experience for Next-Generation Hearables, Wearables and Always-On Devices

Rhea-AI Summary

Cadence Design Systems announced the launch of the Tensilica HiFi 1 DSP, designed to optimize audio processing in small battery-operated devices like earbuds and smartwatches. This DSP boasts ultra-low energy consumption, enhancing battery life while enabling features like always-listening voice commands. Compared to its predecessor, the HiFi 3 DSP, this model offers 11-16% smaller footprint and up to 73% greater energy efficiency. The new DSP is available now and supports Cadence’s Intelligent System Design strategy, catering to the emerging demand in wearables and hearables.

Positive

• HiFi 1 DSP provides up to 73% greater cycle and energy efficiency for ML-based applications.
• It has an 11-16% lower area footprint compared to HiFi 3 DSP.
• The DSP supports advanced audio processing capabilities, enhancing user experience in battery-operated devices.

Negative

• None.

New Tensilica HiFi 1 DSP delivers increased voice- and music-processing performance with optimal neural network capability in a compact footprint with ultra-low energy

SAN JOSE, Calif.--(BUSINESS WIRE)-- Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced the Cadence^® Tensilica^® HiFi 1 DSP, which improves the user experience by delivering breakthrough audio/voice innovation for small battery devices such as TWS earbuds, hearing aids, Bluetooth headsets, smart watches and other wearables. The HiFi 1 DSP’s ultra-low energy consumption extends the duration of voice communication and music playback, allowing always listening to voice commands with minimal impact to battery life. This enables small form factor, low-cost consumer and mobile devices, as well as automotive and industrial devices, to offer increased functionality with low energy consumption.

The new Cadence® Tensilica® HiFi 1 DSP delivers increased voice- and music-processing performance with optimal neural network capability in a compact footprint with ultra-low energy, improving the user experience and extending battery life. (Photo: Business Wire)

A number of converging trends are driving the need for low-energy audio/voice capabilities in a small form factor. Increasingly, hearables and wearables are adopting the Low Complexity Communications Codec (LC3) standardized by the Bluetooth Special Interest Group (SIG) in 2020. In addition, consumer preference for hands-free and touch-free control is driving demand for always-on, or always-listening, devices that respond to voice wake-up commands, and appliances are even adopting these capabilities. Finally, to enable these devices and applications, a small form factor and longer battery life are crucial.

“The Low Complexity Communication Codecs (LC3 and LC3plus) co-invented by Fraunhofer help minimize energy consumption for battery-constrained Bluetooth devices. Fraunhofer and Cadence have a long history partnering on various codecs including LC3/LC3plus, which Cadence has optimized on its Tensilica HiFi DSPs,” said Manfred Lutzky, Head of Audio for Communications department at Fraunhofer IIS. “We’re pleased to see them building upon that experience with the new HiFi 1 DSP that is energy- and cycle-optimized for LC3 and LC3plus. The HiFi 1 DSP embodies the codec’s unprecedented ultra-low energy levels, which should bring relief to small battery hearable and wearable devices with added features and help accelerate the widespread adoption of LC3 and LC3plus.”

The HiFi 1 DSP delivers ultra-low energy encoding and playback of LC3 and other Bluetooth codecs and ultra-low energy keyword spotting for voice wake-up, all in the smallest footprint HiFi DSP. Compared to the HiFi 3 DSP, the most popular audio DSP in the industry for the target applications, the HiFi 1 DSP offers:

• 11 to 16% lower area
• 60 to 73% greater cycle and energy efficiency for ML-based “OK Google” keyword spotting and person detect applications
• Greater than 18% cycle efficiency and 14% energy efficiency for LC3 decoding

“The HiFi 1 DSP from Cadence significantly lowers the energy required to run the always-on class of AI applications, such as the TensorFlow Lite Micro (TFLM) networks, speech wake word and person detect, enabling battery-constrained devices to run for longer lengths of time,” said Pete Warden, technical lead of TFLM at Google. “Cadence and Google have long collaborated on TFLM, and we are excited to continue the collaboration as Cadence pushes the boundaries of energy and performance further.”

HiFi 1 DSP Features and Benefits:

• Special instructions including arithmetic coding for LC3 encode and decode make the HiFi 1 DSP the most energy-efficient DSP for Bluetooth LE Audio
• Instructions for ITU-T3GPP-standardized 2019 BASOPs accelerate speech codecs and run them with high energy efficiency, increasing talk time
• Neural network ISA and load/store accelerate keyword spotting and other machine learning workloads for reduced energy consumption, while memory access-optimized ISA reduces improves performance with small cache sizes
• Efficient signal processing reduces energy and cycles for audio and speech pre- and post-processing
• Optional, low-latency vector floating point unit (VFPU) delivers higher FP throughput with lower energy consumption.
• Vector bool register improves energy efficiency for conditional code

“Intelligent context-aware, always-on processing is becoming key for next-generation hearables to offer users a better auditory experience with greater utility and convenience,” said Mike Demler, senior analyst at The Linley Group. “A blend of machine learning and traditional DSP algorithms is pervading these applications, yet battery life and form factor cannot be compromised. Cadence has established a strong leadership position with its widely adopted and supported Tensilica HiFi DSPs for audio, voice and speech applications. The new HiFi 1 DSP goes a step further by enabling these emerging target applications in a compact design—deftly melding AI, codec and DSP performance at ultra-low energy levels for energy-conscious designs.”

“HiFi DSPs enjoy wide adoption in current-generation TWS earbuds and Bluetooth headsets,” said David Glasco, vice president of research and development for Tensilica IP at Cadence. “The advent of LC3 and wider market trends set the stage for next-generation hearables to offer a superior user experience and longer battery life. With many speech and voice algorithms migrating towards AI, we’re also seeing vastly expanding use cases for analytics and better sound quality in TWS earbuds. The compact HiFi 1 DSP enables these new use cases with ultra-low energy consumption, bringing to the mass market always-on and always-listening capabilities that were until now the privilege of premium products.”

Availability

In general availability now, the HiFi 1 DSP supports Cadence’s Intelligent System Design^™ strategy by enabling SoC design excellence with best-in-class technology. For more information, please visit www.cadence.com/go/HiFi-1.

About Cadence

Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications, including consumer, hyperscale computing, 5G communications, automotive, mobile, aerospace, industrial and healthcare. For seven years in a row, Fortune magazine has named Cadence one of the 100 Best Companies to Work For. Learn more at cadence.com.

© 2021 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo and the other Cadence marks found at www.cadence.com/go/trademarks are trademarks or registered trademarks of Cadence Design Systems, Inc. All other trademarks are the property of their respective owners.

Category: Featured

View source version on businesswire.com: https://www.businesswire.com/news/home/20211028005206/en/

Cadence Newsroom

408-944-7039

newsroom@cadence.com

Source: Cadence Design Systems, Inc.

FAQ

What is the Tensilica HiFi 1 DSP announced by Cadence?

The Tensilica HiFi 1 DSP is a new digital signal processor designed to enhance audio and voice processing in small battery-operated devices while minimizing energy consumption.

How does the HiFi 1 DSP improve energy efficiency?

The HiFi 1 DSP offers up to 73% greater cycle and energy efficiency, enabling longer battery life for devices like TWS earbuds and smartwatches.

What applications are targeted by the HiFi 1 DSP?

The HiFi 1 DSP is targeted at applications in hearables, wearables, automotive, and industrial devices requiring low-energy audio processing.

When will the HiFi 1 DSP be available?

The HiFi 1 DSP is now generally available as part of Cadence's Intelligent System Design strategy.