Cadence and UMC Certified mmWave Reference Flow Delivers First-Pass Silicon Success

Rhea-AI Summary

Cadence Design Systems (CDNS) and United Microelectronics Corporation (UMC) have announced successful customer adoption of their certified mmWave reference flow. Notably, Gear Radio Electronics achieved a first-pass silicon-accurate design for a low noise amplifier IC using UMC's 28HPC+ process technology and the Cadence RF solution. Their collaboration has resulted in faster turnaround times and improved design accuracy, supporting applications up to 110GHz. This initiative enhances RF design capabilities and exemplifies the effectiveness of their combined technology.

Positive

• Successful adoption of mmWave reference flow by Gear Radio Electronics.
• First-pass silicon-accurate LNA IC design achieved using UMC's 28HPC+ process.
• Accelerated turnaround times in design and simulation processes.

Negative

• None.

UMC RF FDK and Cadence RF solution enable Gear Radio to achieve exceptional 5G RF design results

SAN JOSE, Calif. & HSINCHU, Taiwan--(BUSINESS WIRE)-- Cadence Design Systems, Inc. (Nasdaq: CDNS) and United Microelectronics Corporation (NYSE: UMC; TWSE: 2303) (UMC) today announced that customers are adopting their certified mmWave reference flow and experiencing exceptional results. As a proof point, mutual customer, Gear Radio Electronics, Asia’s leading RF IP design firm, successfully taped out a low noise amplifier (LNA) IC on the first pass, leveraging UMC’s 28HPC+ process technology and the Cadence^® RF solution.

UMC’s production-proven 28HPC+ solution is ideal for high-speed mmWave devices and provides silicon-accurate models for circuit applications up to 110GHz, such as Gear Radio’s LNA design. The Cadence Virtuoso^® RF Solution, incorporating multiple electromagnetic (EM) solvers, enabled Gear Radio to achieve silicon-accurate results. More specifically, Gear Radio utilized the Cadence EMX^® Planar 3D Solver, the industry’s gold standard electromagnetic simulator, to accurately model their CMOS design. This resulted in a significantly faster turnaround time between schematic design and post-layout simulation and verification.

Consequently, Gear Radio achieved a first-pass, silicon-accurate design faster than their previous design flow. When Gear Radio compared simulations with the measured silicon results for their 60GHz LNA, metrics such as S₂₁ peak frequency, S₂₁ peak value and noise figure (NF) were within the mid-single-digit range.

The certified mmWave reference flow offers several capabilities via Cadence tools, including:

• Design capture and simulation via the Virtuoso Schematic Editor, Virtuoso ADE Explorer and Assembler, Spectre^® X Simulator, Spectre AMS Designer and the Spectre RF Option
• Layout implementation via the Virtuoso Layout Suite and Pegasus^™ Verification System (PVS)
• Parasitic extraction of transistor-level interconnects via the Quantus^™ Extraction Solution
• Electromagnetic analysis of interconnects across transistors, including passive RF structures via the EMX 3D Planar Solver

“Working closely with UMC, we enabled Gear Radio to achieve excellent results with our certified mmWave flow, which includes our industry-leading Virtuoso RF solution, featuring the EMX 3D Planar Solver,” said Ben Gu, vice president, R&D, of the Multiphysics System Analysis at Cadence. “Furthermore, the Cadence foundry team put forth an incredible effort to ensure that our innovative workflow, when deployed with UMC’s 28nm process, adds tremendous value to customers like Gear Radio. While this is Gear Radio’s first silicon-proven design, we look forward to working on many more successful projects together.”

“Simulation of electromagnetic models from EMX together with parasitic extraction information from the Cadence Quantus Extraction Solution, combined in a single, unified cell view within the Virtuoso RF solution, made post-layout simulations much more efficient,” said BJ Kuo, CEO of Gear Radio Electronics. “Moreover, the silicon data demonstrated proven accuracy with UMC’s mmWave models and the Cadence RF solution.”

“The comprehensive mmWave reference flow we developed with Cadence is making RF design faster and easier, and this is evident through customer successes like Gear Radio’s,” said Osbert Cheng, vice president of device technology development & design support at UMC. “Our collaboration with Cadence enabled Gear Radio to create an accurate, innovative LNA design where Gear Radio’s silicon data correlated closely to our models. We are eager to see even more customer successes with our mmWave platform.”

Cadence RF solutions support the Cadence Intelligent System Design^™ Strategy, enabling SoC design excellence. Please visit www.cadence.com/go/rfsols28 to learn more about Cadence RF solutions. For more about UMC’s 28HPC+ process technology, please visit www.umc.com/en/Product/technologies/Detail/28nm.

About Cadence

Cadence is a pivotal leader in electronic systems design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to complete systems for the most dynamic market applications, including hyperscale computing, 5G communications, automotive, mobile, aerospace, consumer, industrial and healthcare. For eight years in a row, Fortune magazine has named Cadence one of the 100 Best Companies to Work For. Learn more at cadence.com.

About UMC

UMC (NYSE: UMC, TWSE: 2303) is a leading global semiconductor foundry company. The company provides high quality IC fabrication services, focusing on logic and various specialty technologies to serve all major sectors of the electronics industry. UMC’s comprehensive IC processing technologies and manufacturing solutions include Logic/Mixed-Signal, embedded High-Voltage, embedded Non-Volatile-Memory, RFSOI and BCD etc. Most of UMC’s 12-in & 8-in fabs with its core R&D are located in Taiwan, with additional ones throughout Asia. UMC has total 12 fabs in production with combined capacity over 800,000 wafers per month (8-in equivalent), and all of them are certified with IATF 16949 automotive quality standard. UMC is headquartered in Hsinchu, Taiwan, plus local offices in United States, Europe, China, Japan, Korea & Singapore, with worldwide total 20,000 employees. For more information, please visit: https://www.umc.com.

© 2022 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo and the other Cadence marks found at www.cadence.com/go/trademarks are trademarks or registered trademarks of Cadence Design Systems, Inc.

Category: Featured

View source version on businesswire.com: https://www.businesswire.com/news/home/20221129005185/en/

Cadence Newsroom

408-944-7039

newsroom@cadence.com

UMC Corporate Communications

Michelle Yun

(886) 2-2658-9168 ext. 16951

michelle_yun@umc.com

Source: Cadence Design Systems, Inc.

FAQ

What is the significance of the collaboration between Cadence and UMC?

The collaboration between Cadence and UMC has enabled customers like Gear Radio Electronics to achieve faster and more accurate RF designs, demonstrating the effectiveness of their certified mmWave reference flow.

Which companies are involved in the recent press release regarding RF design?

The press release highlights the collaboration between Cadence Design Systems (CDNS) and United Microelectronics Corporation (UMC) in advancing RF design technology.

What technology did Gear Radio Electronics utilize for their LNA design?

Gear Radio Electronics utilized UMC's 28HPC+ process technology and the Cadence RF solution, achieving a first-pass silicon-accurate design for their low noise amplifier IC.

What are the expected outcomes of using the mmWave reference flow?

The mmWave reference flow is expected to enhance design accuracy, reduce turnaround times for RF applications, and improve collaboration between design and simulation tools.

What frequency range does UMC's 28HPC+ process support?

UMC's 28HPC+ process technology supports circuit applications up to 110GHz, making it suitable for high-speed mmWave devices.