Q PRECIOUS AND BATTERY METALS DRILLS 4.2% Copper, 4% Zinc, with Silver and Gold 0.83% Copper Equivalent over 25.45 Metres LA CORNE SOUTH PROJECT, Val d’Or Quebec
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF) announced significant results from its first drill hole at the La Corne South project in Val d'Or, Quebec. Hole 24LCS-01 revealed robust VMS-style mineralization with high-grade intercepts including:
- 4.2% copper, 4% zinc, 0.17 ppm gold, and 30.3 ppm silver over 0.55 meters
- 1.8% copper equivalent over 6.1 meters
- 0.83% copper equivalent over 25.45 meters
The company completed three drill holes totaling 426 meters, testing a 50-meter strike length of a TDEM conductor and magnetic high. Results from the other two holes are pending. QMET plans to drill 5-6 additional holes along a 2-kilometer corridor targeting strong TDEM conductors.
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF) ha annunciato risultati significativi dal suo primo foro di perforazione al progetto La Corne South a Val d'Or, Quebec. Il foro 24LCS-01 ha rivelato una mineralizzazione di tipo VMS robusta con intercettazioni ad alta qualità, tra cui:
- 4,2% di rame, 4% di zinco, 0,17 ppm di oro e 30,3 ppm di argento su 0,55 metri
- 1,8% equivalente di rame su 6,1 metri
- 0,83% equivalente di rame su 25,45 metri
L'azienda ha completato tre fori di perforazione per un totale di 426 metri, testando una lunghezza di estrazione di 50 metri di un conduttore TDEM e alta magnetica. I risultati degli altri due fori sono in attesa. QMET prevede di perforare ulteriori 5-6 fori lungo un corridoio di 2 chilometri per mirare a forti conduttori TDEM.
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF) anunció resultados significativos de su primer agujero de perforación en el proyecto La Corne South en Val d'Or, Quebec. El agujero 24LCS-01 reveló una mineralización robusta de tipo VMS con intercepciones de alta ley, incluyendo:
- 4.2% de cobre, 4% de zinc, 0.17 ppm de oro y 30.3 ppm de plata sobre 0.55 metros
- 1.8% equivalente de cobre sobre 6.1 metros
- 0.83% equivalente de cobre sobre 25.45 metros
La empresa completó tres agujeros de perforación que suman 426 metros, probando una longitud de 50 metros de un conductor TDEM y un alto magnético. Los resultados de los otros dos agujeros están pendientes. QMET planea perforar 5-6 agujeros adicionales a lo largo de un corredor de 2 kilómetros orientado a fuertes conductores TDEM.
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF)는 퀘벡 발 도르의 라 콘 남부 프로젝트에서 첫 번째 드릴 홀의 주요 결과를 발표했습니다. 홀 24LCS-01은 강한 VMS 스타일의 광물화를 나타내며, 높은 등급의 인터셉트를 포함하고 있습니다:
- 0.55미터에서 구리 4.2%, 아연 4%, 금 0.17ppm, 은 30.3ppm
- 6.1미터에서 구리 동등량 1.8%
- 25.45미터에서 구리 동등량 0.83%
회사는 총 426미터를 다섯 개의 드릴 홀을 완료했으며, TDEM 도체와 자기 고의 50미터 길이를 테스트했습니다. 나머지 두 홀의 결과는 대기 중입니다. QMET는 2킬로미터의 구간에 따라 5-6개의 추가 홀을 드릴링할 계획이며, 강력한 TDEM 도체를 목표로 하고 있습니다.
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF) a annoncé des résultats significatifs de son premier trou de forage sur le projet La Corne South à Val d'Or, au Québec. Le trou 24LCS-01 a révélé une minéralisation de type VMS robuste avec des interceptions de haute qualité, notamment :
- 4,2 % de cuivre, 4 % de zinc, 0,17 ppm d'or et 30,3 ppm d'argent sur 0,55 mètre
- 1,8 % d'équivalent cuivre sur 6,1 mètres
- 0,83 % d'équivalent cuivre sur 25,45 mètres
L'entreprise a complété trois trous de forage totalisant 426 mètres, testant une longueur de 50 mètres d'un conducteur TDEM et d'un haut magnétique. Les résultats des deux autres trous sont en attente. QMET prévoit de forer 5 à 6 trous supplémentaires le long d'un couloir de 2 kilomètres ciblant des conducteurs TDEM forts.
Q Precious & Battery Metals Corp. (CSE:QMET, OTC:BTKRF) gab bedeutende Ergebnisse aus seinem ersten Bohrloch beim Projekt La Corne South in Val d'Or, Quebec, bekannt. Das Bohrloch 24LCS-01 zeigte robuste VMS-artige Mineralisierung mit hochgradigen Einschüssen, darunter:
- 4,2% Kupfer, 4% Zink, 0,17 ppm Gold und 30,3 ppm Silber über 0,55 Meter
- 1,8% Kupferäquivalent über 6,1 Meter
- 0,83% Kupferäquivalent über 25,45 Meter
Das Unternehmen hat drei Bohrlöcher mit einer Gesamtlänge von 426 Metern abgeschlossen und dabei eine 50-Meter-Strecke eines TDEM-Leiters und eines magnetischen Hochs getestet. Die Ergebnisse der beiden anderen Löcher stehen noch aus. QMET plant, 5-6 weitere Löcher entlang eines 2 Kilometer langen Korridors zu bohren, die starke TDEM-Leiter anvisieren.
- High-grade copper and zinc mineralization discovered: 4.2% Cu, 4% Zn over 0.55 meters
- Significant mineralized intercept: 0.83% copper equivalent over 25.45 meters
- Successful confirmation of geophysical targets with drill results
- Elevated nickel content (250-650 ppm) potentially adding value to mineralization
- Plans for additional drilling to test 2-kilometer corridor with strong TDEM conductors
- True widths of mineralization not yet determined
- Results from only one of three drilled holes available
- testing of 50-meter strike length so far
VANCOUVER, BC / ACCESSWIRE / September 9, 2024 / Q Precious & Battery Metals Corp. ("QMET" or the "Company") (CSE:QMET)(OTC PINK:BTKRF)(FRA:0NB) is very pleased to present the results of core samples taken from the first hole of three holes completed to date at their La Corne South project.
Results from hole 24LCS-01 indicate robust VMS-style mineralization containing elevated copper, zinc, silver, and gold. The significant downhole intercepts are as follows:
122.75-123.3 -
4.2% copper,4% zinc, 0.17 ppm gold, and 30.3 ppm silver123.3-123.85 -
1.9% copper,3.17% zinc, and 14.7 ppm silver123.85-124.4 -
0.79% copper,1.3% zinc, and 7.33 ppm silver125.5-126 -
2.61% copper
*True widths of mineralization have not yet been determined
The above intercepts are within a larger envelope of mineralization from 102.15 metres to 130.45 metres downhole. Elevated results were obtained from semi-massive to massive sulphides including pyrite, pyrrhotite, chalcopyrite, and sphalerite as logged by the geologists. Using weighted averages combined with copper equivalents, the following has been calculated for the higher-grade zone intercepted in hole 24LCS-01:
1.8 % copper equivalent** over 6.1 metres (122.75-127.6), including
2.56% copper equivalent over 3.95 metres (122.75-126.7)
The weighted average for the total mineralized zone from 102.15 metres to 127.6 metres is calculated at:
0.83% copper equivalent over 25.45 metres
**Copper equivalents utilize USA
Several samples from hole 24LCS-01 also returned elevated nickel (250-650 ppm, or 0.5 to 1.3 pounds Ni per tonne) that may add to the overall value of the mineralization.
The below table summarizes the drill hole collar information.
HOLE id | Azimuth | Dip | Depth | UTM E | UTM N |
LCS-24-01 | 040 | -45 | 144.6 | 297970 | 5354750 |
LCS-24-02 | 055 | -45 | 144 | 297970 | 5354750 |
LCS-24-03 | 054 | -45 | 137.65 | 297942 | 5354812 |
The three drill holes completed to date were designed to test a coincident TDEM conductor and magnetic high discovered previously by QMET geophysical surveys. The company completed a total of 426 metres of drilling that tested an approximate 50 metres of strike length of the first target. The results from hole 24LCS-01 indicate that significant copper and other metals are associated with these geophysical targets, which bodes well for continued drilling of similar targets outlined on the property. The company is waiting for results from holes 24LCS-02 and 24LCS-03 to assist in evaluating the mineralization potential.
Explo-Logik Inc, located in Val d'Or, is managing the drill program including core logging and sampling at their facility. A total of 278 samples of core were directly delivered by Explo-Logik staff to the ALS laboratory in Val d'Or, Quebec. The samples are undergoing ALS ME-MS61L process that uses 4-acid digestion of pulverized samples followed by mass spectrometer detection for 48 elements, and process Au-ICP21 that analyzes for gold, platinum, and palladium using fire assay. For quality assurance and control Explo-Logik inserted blanks, standards, and duplicates at one insert every 10 samples.
The geologic team will continue interpretation of geology and geophysics, combined with knowledge gained from drilling of holes 24LCS-01 through 24LCS-03, for targeting of future drill holes. Several strong TDEM conductors will be priority targets when drilling resumes. A corridor length of approximately two kilometres is to be tested with an additional 5 or 6 drill holes of average 100 metres depth.
The QMET geologic team is very pleased with the results obtained from hole 24LCS-01 as they support the exploration model for multi-element volcanic-hosted sulphides at La Corne South. The company is looking forward to receiving results from holes 24LCS-02 and 24LCS-03 in the following weeks.
Q PRECIOUS & BATTERY METALS CORP.
QMET exploration programs undertaken in Quebec are supervised by Dr. Mathieu Piché, OGQ, with office located north of Val d'Or. He is also a Q Battery Metals company director. The company has
Perry Grunenberg, P.Geo, a "Qualified Person" as that term is defined under NI 43-101, has reviewed and approved the technical information in this news release.
Cautionary Statement
This press release contains forward-looking statements based on assumptions as of that date. These statements reflect management's current estimates, beliefs, intentions and expectations; they are not guarantees of future performance. The Company cautions that all forward-looking statements are inherently uncertain and that actual performance may be affected by a number of material factors, many of which are beyond the Company's control. Such factors include, among other things: risks and uncertainties relating to exploration and development; the ability of the Company to obtain additional financing; the Company's limited operating history; the need to comply with environmental and governmental regulations; fluctuations in the prices of commodities; operating hazards and risks; competition and other risks and uncertainties, including those described in the Company's Prospectus dated September 8, 2017 available on www.sedar.com. Accordingly, actual and future events, conditions, and results may differ materially from the estimates, beliefs, intentions, and expectations expressed or implied in the forward-looking information. Except as required under applicable securities legislation, the Company undertakes no obligation to publicly update or revise forward-looking information.
On behalf of the Board of Directors
Richard Penn
CEO
(778) 384-8923
SOURCE: Q Battery Metals Corp.
View the original press release on accesswire.com
FAQ
What were the key drilling results from Q Precious & Battery Metals' La Corne South project?
How many drill holes has Q Precious & Battery Metals (BTKRF) completed at La Corne South?
What are Q Precious & Battery Metals' (BTKRF) future drilling plans for La Corne South?