BLACK SWAN GRAPHENE LAUNCHES ITS FIFTH GRAPHENE ENHANCED MASTERBATCH PRODUCT: HDPE FOR PACKAGING SUSTAINABILITY

Rhea-AI Summary

Black Swan Graphene Inc. (TSXV: SWAN) (OTCQB: BSWGF) has launched its fifth Graphene Enhanced Masterbatch (GEM) product, GEM S27M, as part of its GraphCore™-01 line. This new offering is a 10% graphene nanoplatelet (GNP) masterbatch in high-density polyethylene (HDPE), designed for packaging applications. GEM S27M enhances HDPE's mechanical properties, increasing strength and durability for improved performance in packaging and films.

The product marks a significant advancement in sustainable packaging, allowing customers to enhance material performance while demonstrating environmental commitment. When blended with recycled polyethylene, it can reinforce and enhance original mechanical performance parameters, typically with less than 1% loading.

GEM S27M joins four other recently launched GEM products in the GraphCore line, each targeting specific applications in industries such as automotive, textiles, electronics, and consumer goods. These products offer various improvements, including enhanced impact resistance, tensile properties, and weight reduction.

TORONTO, July 16, 2024 /PRNewswire/ - Black Swan Graphene Inc. ("Black Swan" or the "Company") (TSXV: SWAN) (OTCQB: BSWGF) (Frankfurt: R96) is proud to unveil its new Graphene Enhanced Masterbatch ("GEM"), GEM S27M, the latest innovation in the Company's GraphCore™-01 product line ("GraphCore"). This new offering is a 10% graphene nanoplatelet ("GNP") masterbatch in high-density polyethylene ("HDPE"), designed to deliver transformative benefits.

HDPE is renowned for its high strength-to-density ratio, making it ideal for packaging applications. When enhanced with graphene, HDPE exhibits improved mechanical properties, including increased strength and durability, ensuring better performance in demanding applications, notably in packaging and films, such as plastics bottles and garbage bags.

The introduction of GEM S27M marks a significant advancement in sustainable packaging. By blending this new HDPE masterbatch with recycled polyethylene ("PE"), Black Swan allows its customers to enhance material performance while demonstrating a commitment to sustainability.

Chris Herron, Vice-President of Research and Product Development of Black Swan, commented: "When polymers are recycled, some of the original properties are often reduced. The addition of small amounts of graphene, typically less than 1% loading, reinforces and enhances the original mechanical performance parameters."

GEM S27M is the fifth GEM of the GraphCore line of products and is available in large volumes with short lead-time. Black Swan also recently launched the following products, all issued from its GraphCore Powder (GC1004):

1. GEM X23M for use in Polypropylene, a commercial product typically used in the automotive industry for bumpers (fenders), interiors, battery casings and general packaging applications. The use of this Black Swan GEM can enhance impact resistance by approximately 20%;
2. GEM S24M, also for use in Polypropylene, improves tensile properties typically in fibre applications, often used in textiles, ropes and composites;
3. GEM D26M improves tensile properties of Polyamide Nylon 6, a versatile engineering plastic used in automotive under-hood applications, electrical component housing, seatbelts, industrial wire and cables; and
4. GEM bB25L for use in thermoplastic polyurethane, typically used in applications such as fan belts, conveyer belts, mobile phone covers, cable covers, consumer goods and footwear. This Black Swan GEM enhances tensile strength and elasticity, resulting in a weight reduction of up to 25%, as demonstrated in specific applications.

About Black Swan Graphene Inc.

Black Swan is focused on the large-scale production and commercialization of patented high-performance and low-cost graphene products aimed at several industrial sectors, including concrete, polymers, Li-ion batteries, and others, which are expected to require large volumes of graphene. Black Swan aims to leverage the low cost and green hydroelectricity of the province of Québec as well as the proximity of the province's emerging graphite industry in order to establish an integrated supply chain, reduce overall costs, and accelerate the deployment of graphene usage. On March 27, 2023, Black Swan, Nationwide Engineering Research and Development Ltd. and Arup Group Ltd. ("Arup") announced strategic partnerships, establishing a fully integrated supply chain, and providing a turnkey solution for the construction and concrete industries. Arup is a multinational engineering consultancy headquartered in London, United Kingdom, with 18,000 experts working across 140 countries. Black Swan's graphene processing technology was developed by Thomas Swan & Co. Ltd. ("Thomas Swan") over the last decade. Thomas Swan is a United Kingdom-based global chemicals manufacturer, with a century-long track record and has been at the forefront of graphene innovation.

More information is available at: www.blackswangraphene.com.

Black Swan Graphene Inc. on behalf of the Board of Directors

Simon Marcotte, CFA, President & Chief Executive Officer

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Information

The information contained herein contains "forward-looking statements" within the meaning of applicable securities legislation. Forward-looking statements relate to information that is based on assumptions of management, forecasts of future results, and estimates of amounts not yet determinable. Any statements that express predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance are not statements of historical fact and may be "forward-looking statements." Forward-looking statements are subject to a variety of risks and uncertainties which could cause actual events or results to differ from those reflected in the forward-looking statements, including, without limitation: risks related to the TSXV listing, risk related to the failure to obtain adequate financing on a timely basis and on acceptable terms; risks related to the outcome of legal proceedings; political and regulatory risks associated with the industry; risks related to the maintenance of stock exchange listings; risks related to environmental regulation and liability; the potential for delays in development activities or the completion of feasibility studies; the uncertainty of profitability; risks related to the inherent uncertainty of production and cost estimates and the potential for unexpected costs and expenses; results of feasibility studies, and the possibility that future results will not be consistent with the Company's expectations; risks related to commodity prices fluctuations; and other risks and uncertainties related to the Company's prospects, properties and business detailed elsewhere in the Company's disclosure record. Should one or more of these risks and uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those described in forward-looking statements. Furthermore, performance results of graphene products as additives can vary widely depending on type and the specificity of the target material, the specifics of the graphene product itself, including but not limited to, carbon purity, particle size, surface agent, dispersion behavior, and application and usage methods. Investors are cautioned against attributing undue certainty to forward-looking statements and initial test results. These forward-looking statements and test results are made as of the date hereof and the Company does not assume any obligation to update or revise them to reflect new events or circumstances, except in accordance with applicable securities laws. Actual events or results could differ materially from the Company's expectations or projections.

View original content to download multimedia:https://www.prnewswire.com/news-releases/black-swan-graphene-launches-its-fifth-graphene-enhanced-masterbatch-product-hdpe-for-packaging-sustainability-302197473.html

SOURCE Black Swan Graphene Inc.

FAQ

What is Black Swan Graphene's new product GEM S27M and what are its applications?

GEM S27M is a 10% graphene nanoplatelet masterbatch in high-density polyethylene (HDPE), designed for packaging applications. It enhances HDPE's mechanical properties, improving strength and durability for better performance in packaging and films, such as plastic bottles and garbage bags.

How does GEM S27M contribute to sustainability in packaging?

GEM S27M allows customers to enhance material performance while demonstrating environmental commitment. When blended with recycled polyethylene, it can reinforce and improve original mechanical performance parameters, typically with less than 1% loading, supporting sustainable packaging initiatives.

What other Graphene Enhanced Masterbatch products has Black Swan Graphene (BSWGF) recently launched?

Black Swan Graphene has recently launched four other GEM products: GEM X23M for polypropylene in automotive and packaging, GEM S24M for polypropylene in fiber applications, GEM D26M for polyamide nylon 6 in various industries, and GEM bB25L for thermoplastic polyurethane in consumer goods and industrial applications.

What specific improvements do Black Swan Graphene's GEM products offer?

Black Swan Graphene's GEM products offer various improvements, including enhanced impact resistance (up to 20% in GEM X23M), improved tensile properties, and weight reduction (up to 25% in GEM bB25L for specific applications).

When did Black Swan Graphene (BSWGF) announce the launch of GEM S27M?

Black Swan Graphene announced the launch of GEM S27M, its fifth Graphene Enhanced Masterbatch product, on July 16, 2024.