Athena Gold Samples Up To 50.6 g/t Gold from Buster Mine at Excelsior Springs Project, Walker Lane, Nevada

Rhea-AI Summary

Athena Gold (CSE:ATHA)(OTCQB:AHNR) reports high-grade gold and silver samples from its first underground mapping and sampling program at the Excelsior Springs project in Nevada's Walker Lane District. Key findings include:

- Sample of 50.6 g/t Au and 33.7 g/t Ag over 0.3 m from the 75' level
- Sample of 28.1 g/t Au and 29.6 g/t Ag over 1.0 m from the 125' level

The program, conducted at the past-producing Buster Mine, provides insights into the mineralized orebody and structural controls. Two distinct structural orientations were observed, both east-west striking. The company believes this work demonstrates the importance of shallow structures in controlling mineralization at Excelsior Springs, which will inform future drilling targets.

Positive

• High-grade gold samples of 50.6 g/t Au and 28.1 g/t Au confirmed at Buster Mine
• First-ever underground mapping and sampling program completed at Excelsior Springs
• Improved understanding of structural controls on mineralization for future drill planning
• Potential for larger mineralized system connecting Buster Mine and Western Slope Zone

Negative

• sampling due to small stoping dimensions and uncertain ground conditions
• Historical mineral inventory estimate not compliant with current standards

VACAVILLE, CA / ACCESSWIRE / September 24, 2024 / Athena Gold Corporation (CSE:ATHA)(OTCQB:AHNR) ("Athena" or the "Company") is pleased to report high-grade gold and silver samples from its first-ever underground mapping and sampling program at its flagship Excelsior Springs project in Nevada's prolific Walker Lane District. Five samples were collected underground from the past-producing Buster Mine, which historically produced an estimated 19,200 oz Au at an average grade of 41.1 g/t Au. Two of these samples returned high-grade Au, including:

• 50.6 g/t Au and 33.7 g/t Ag over 0.3 m, from the 75' level; and,

• 28.1 g/t Au and 29.6 g/t Ag over 1.0 m, from the 125' level.

The reconnaissance program conducted in August 2024 represents Athena's first-time underground at the Buster Mine, providing an opportunity for the team to have a close-up look at the mineralized orebody and gain a better understanding of structural controls at Excelsior. Historical sampling included four samples which exceeded the upper detection limit of 10 g/t Au; however, these were never analyzed to completion. The geologist who collected the surface and underground samples at the Buster Mine in 1986 estimated a mineralized zone containing a historical mineral inventory of up to 200,000 oz Au within a shallow depth of 61 m. This estimate is historical in nature and should not be relied upon as a current mineral resource.

"We are pleased to see sampling results confirm the high-grade nature of the epithermal veins at the historic Buster Mine. In addition, we now have a much better understanding of structural controls on mineralization at Excelsior, which should bode well for our planning our upcoming drill program" stated John Power, President & CEO of Athena Gold. "Due to small stoping dimensions and uncertain ground conditions, we were unable to sample over broader zones - however, we have reason to believe that high-grade, vein-hosted mineralization ‘bleeds' into the host rock as evidenced by previous drilling at Excelsior. The Buster Mine area is located 400 meters from the Western Slope Zone where our recent RC drill campaigns returned several impressive intercepts including up to 5.2 g/t Au over 33 m. Importantly, the geochemistry at Buster and the Western Slope Zone appear very similar, providing evidence that both systems may be one of the same, and opens up the possibility of a larger, mineralized system connecting these two zones."

Two distinct structural orientations were observed and believed to be controlling mineralization, both east-west striking. The first is very steeply north dipping and yielded 50.6 g/t Au over 0.3 m (Figure 1). This sample was collected near the eastern stope on the 75' level, where historical sampling returned 5.8 g/t Au over 1.07 m. Historically, the higher-grade samples which exceeded the 10 g/t Au detection limit were collected from the western stope on the 75' level. Most of the past production occurred within the western stope, which extends from near surface to the 125' level.

On the 125' level, a shallow 35° north dipping fault zone yielded 28.1 g/t Au over 1.0 m (Figure 2). The steeper structures identified on the 75' level appear to be cut by this younger, shallow structure.

This work program demonstrated the important role these shallow structures, which can be traced on surface, play in the control of mineralization at Excelsior Springs. Additional surface and underground mapping will be conducted to better understand the distribution and extent of mineralization along these structures to better target future drilling.

Figure 1: Plan map of the historic Buster Mine, 75' level.

Figure 2: Photograph of 125' Level at Buster Mine, showing sample location and identified structures, looking east.

About the Buster Mine

The Buster Mine is located on the Fortunatus patented claim owned by Athena and is an integral part of our flagship Excelsior Springs Project.

Mineralization at the Buster Mine was discovered in 1872 and has been through several periods of small-scale mining and exploration efforts. During the late 1800s and perhaps the early 1900s there was unconfirmed reported production from the Buster Mine of an estimated 19,200 oz Au at an average grade of 41.1 g/t Au.

The Buster Shaft is 235' deep, with workings on the 75', 125', and 175' levels. It is estimated there is approximately 1,540' of accessible workings, most of which are on the 75' and 125' levels.

Technical Information

The data disclosed in this news release includes historical exploration sampling results. The reader is cautioned that the historical results are based on prior data and reports prepared by previous property owners and other sources. Athena has not independently analyzed the results of the historical exploration work to verify the results. The reader is cautioned not to treat them, or any part of them, as current and that a qualified person has not done sufficient work to verify the results and that they may not form a reliable guide to future results. No independent QA/QC protocols are known for these samples and as such analytical results may be unreliable. Athena's current and future exploration work includes verification of the historical data through further exploration.

QA/QC

Sample preparation and gold analysis was performed by ALS Minerals in Reno, Nevada. Rock samples were analyzed for gold and 50 other elements by inductively coupled plasma followed by mass spectrometry (ME-MS41) and gold by 30-gram fire assay followed by atomic absorption (Au-AA23). Gold over limits were determined by a gravimetric method (Au-GRA21).

Qualified Person

Technical information in this news release has been reviewed and approved by Matthew R. Dumala, P.Eng., a geological engineer with Archer, Cathro & Associates (1981) Limited and a qualified person for the purposes of National Instrument 43-101.

About Our Flagship Excelsior Springs Project

The Excelsior Springs Project (the "Project") lies within the prolific Walker Lane tectonic trend, a large region of northwest-trending, strike-slip fault zones that host a significant number of precious metal deposits having very strong structural control for mineralization. The Walker Lane trend is experiencing a major resurgence of intense and successful exploration and development.

The Project contains numerous prospect pits, trenches, roads, surface sampling sites and 113 drill holes to date within a 300m X 3,000m wide (1,000 foot-wide and 10,000-foot-long east-west trending zone of shearing and alteration. Underground workings on the two patented claims within the Project had unverified, historical production of 19,200 oz at 41.1 g/t Au.

Gold mineralization discovered at the Project to date occurs in quartz veins, stock-works, and silicified zones in hornfels and calc-silicate altered country rock and is generally close to porphyry dykes. The best grades and thicknesses discovered recently were found in oxidized and altered sedimentary rock immediately above porphyry dykes intruded along preexisting east- and east-northeast trending faults. The mineralized stock-work vein zones are shallow and have a relatively flat plunge, making them potentially amenable to open pit mining methods.

Based on the results of previous drilling programs, the Project has the potential with to host one or more shallow gold deposits amenable to open pit mining, along with deeper, higher grade feeder zones that may be found and could be mined by underground methods. In the opinion of management and its consultants, the Project is very promising and further exploration has the potential to expand the known mineralization and establish additional mineralized zones.

About Athena Gold Corporation

Athena is engaged in the business of mineral exploration and the acquisition of mineral property assets. Its objective is to locate and develop economic precious and base metal properties of merit and to conduct additional exploration drilling and studies on the Project.

For further information about Athena Gold Corporation and our Excelsior Springs Gold project, please visit www.athenagoldcorp.com.

On Behalf of the Board of Directors

John C. Power
Chief Executive Officer and President

For further information, please contact:

John C. Power
Email: johnpower@athenagoldcorp.com

Jason Libenson
President and CCO
Castlewood Capital Corporation
Phone: (647)-534-9884
Email: jason@castlewoodcapital.ca

Forward Looking Statements

This press release contains forward-looking statements and forward-looking information (collectively, "forward-looking statements") within the meaning of applicable Canadian and U.S. securities laws. All statements, other than statements of historical fact, included herein including, without limitation, statements regarding future exploration plans and the completion of a phase 2 drill program at the Project, future results from exploration, and the anticipated business plans and timing of future activities of the Company, are forward-looking statements. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: "believes", "will", "expects", "anticipates", "intends", "estimates", "plans", "may", "should", "potential", "scheduled", or variations of such words and phrases and similar expressions, which, by their nature, refer to future events or results that may, could, would, might or will occur or be taken or achieved. In making the forward-looking statements in this press release, the Company has applied several material assumptions, including without limitation, that there will be investor interest in future financings, market fundamentals will result in sustained precious metals demand and prices, the receipt of any necessary permits, licenses and regulatory approvals in connection with the future exploration and development of the Company's projects in a timely manner, QAQC procedures at the Project were followed, the availability of financing on suitable terms for the exploration and development of the Company's projects and the Company's ability to comply with environmental, health and safety laws.

The Company cautions investors that any forward-looking statements by the Company are not guarantees of future results or performance, and that actual results may differ materially from those in forward-looking statements as a result of various factors, including, operating and technical difficulties in connection with mineral exploration and development activities, actual results of exploration activities, the estimation or realization of mineral reserves and mineral resources, the inability of the Company to obtain the necessary financing required to conduct its business and affairs, as currently contemplated, the timing and amount of estimated future production, the costs of production, capital expenditures, the costs and timing of the development of new deposits, requirements for additional capital, future prices of precious metals, changes in general economic conditions, changes in the financial markets and in the demand and market price for commodities, lack of investor interest in future financings, accidents, labor disputes and other risks of the mining industry, delays in obtaining governmental approvals, permits or financing or in the completion of development or construction activities, risks relating to epidemics or pandemics such as COVID-19, including the impact of COVID-19 on the Company's business, financial condition and results of operations, changes in laws, regulations and policies affecting mining operations, title disputes, the inability of the Company to obtain any necessary permits, consents, approvals or authorizations, including of the Canadian Securities Exchange, the timing and possible outcome of any pending litigation, environmental issues and liabilities, and other factors and risks that are discussed in the Company's periodic filings with the SEC and disclosed in the final long form prospectus of the Company dated August 31, 2021.

Readers are cautioned not to place undue reliance on forward-looking statements. The Company undertakes no obligation to update any of the forward-looking statements in this press release or incorporated by reference herein, except as otherwise.

SOURCE: Athena Gold Corp.

View the original press release on accesswire.com

FAQ

What were the highest gold grades sampled at Athena Gold's Excelsior Springs project?

The highest gold grades sampled were 50.6 g/t Au over 0.3 m from the 75' level and 28.1 g/t Au over 1.0 m from the 125' level at the Buster Mine.

When did Athena Gold (AHNR) conduct its underground sampling program at Excelsior Springs?

Athena Gold conducted its first-ever underground mapping and sampling program at Excelsior Springs in August 2024.

What structural orientations were observed controlling mineralization at the Buster Mine?

Two distinct structural orientations were observed, both east-west striking: a very steeply north dipping structure and a shallow 35° north dipping fault zone.

How does the Buster Mine area relate to Athena Gold's (AHNR) previous drilling results?

The Buster Mine area is located 400 meters from the Western Slope Zone, where previous drilling returned intercepts up to 5.2 g/t Au over 33 m. The geochemistry appears similar, suggesting a potential connection between the two zones.