Aehr Receives $1.3 Million Order for FOX-NP™ Test & Burn-in Systems for Photonics Device Characterization and Product Qualification

Rhea-AI Summary

Aehr Test Systems (NASDAQ: AEHR) announced a $1.3 million order for two FOX-NP™ systems from a major semiconductor manufacturer. These systems will enhance test capacity for silicon photonics devices, expected to ship in the coming months. The order reflects growing demand for silicon photonics, projected to grow at a 49% CAGR from 2021 to 2026. Aehr's FOX-NP systems will optimize device manufacturing by allowing simultaneous testing of multiple wafers, leading to cost savings and improved reliability.

Positive

• Received a $1.3 million order for two FOX-NP systems.
• The customer is a major semiconductor manufacturer, indicating strong demand.
• Silicon photonics market projected to grow at 49% CAGR from 2021 to 2026.

Negative

• None.

FREMONT, Calif., Oct. 11, 2021 (GLOBE NEWSWIRE) -- Aehr Test Systems (NASDAQ: AEHR), a worldwide supplier of semiconductor test and reliability qualification equipment, today announced it has received a $1.3 million order from a current customer for two FOX-NP™ systems, adding to their existing fleet to provide additional test capacity for new product engineering characterization and qualification of photonics devices. The FOX-NP Systems are expected to ship within the next few months.

Gayn Erickson, President and CEO of Aehr Test Systems, commented, “This customer is one of the world’s largest semiconductor manufacturers and is using Aehr as their plan of record for all wafer level burn-in and stabilization of their silicon photonics wafers today. These new FOX-NP systems are configured with two test blades to allow two wafers to be tested in parallel using our proprietary WaferPak Contactors, and each system allows the customer to test either two of the same wafers or two different wafers with different test plans. This customer is expected to purchase sets of Aehr WaferPaks for these systems at a later date. In addition, this customer continues to forecast significant growth in shipments for silicon photonics devices that we expect to drive the need for additional production burn-in capacity for multiple years into the future.

“Stabilization of optical transmitters embedded in silicon photonics as well as several other photonics devices is a critical manufacturing step where the devices are subjected to high temperatures and power to stabilize their output power. This has traditionally been done in package or module form and is a very costly step that is not prone to high parallelism or mass production. Aehr’s FOX-NP systems used for engineering, device qualification, and new product introduction as well as our FOX-XP™ multi-wafer production systems are able to burn-in and stabilize these devices while still in wafer form on 100mm to 300mm diameter wafers. The systems can test not only 100% of the devices on each wafer up to thousands of devices, but can do this on up to nine 2000 watt high power wafers or up to eighteen 1000 watt wafers at a time in a single FOX-XP system. This results in both savings from removing failed devices before they are packaged or put into modules later in the process, and significant cost savings associated with stabilization of these devices at massive parallelism while still in wafer form.

“We continue to be very optimistic about the silicon photonics and photonics sensors markets and believe they will be significant growth drivers for Aehr. Yole Research forecasts the silicon photonics market to grow at a 49% cumulative average growth rate (CAGR) from 2021 through 2026. The rapid growth of integrated optical devices in data centers and data center interconnect infrastructure, mobile devices, automotive applications, and now wearable biosensor markets is driving substantially higher requirements for initial quality and long-term reliability, and they are increasing with every new product generation. We believe these new applications are driving an entirely new level of quality and reliability expectation for these systems and pose a significant long-term growth opportunity for Aehr.

“In addition to the growth opportunities of silicon photonics in fiberoptic transceivers, companies are now making public mention of adding optical transmission and reception to semiconductors beyond just the silicon used for combined silicon, laser transmitters and optical detection receivers for discrete fiber optic transceiver modules. Companies like Intel and Nvidia are talking about integrating fiber optic transceivers into their core and graphics processor units (CPUs and GPUs). Long term, we see integrated silicon photonics devices being integrated directly into other semiconductors directly or using multi-die or 3D packaging technologies that will further increase the total available market and demand for our FOX wafer level and singulated die products.”

The FOX-XP system, available with multiple WaferPak Contactors (full wafer test) or multiple DiePak™ Carriers (singulated die/module test) configurations, is capable of functional test and burn-in/cycling of integrated devices such as silicon carbide power devices, silicon photonics as well as other optical devices, 2D and 3D sensors, flash memories, Gallium Nitride (GaN), magnetic sensors, microcontrollers, and other leading-edge ICs in either wafer form factor, before they are assembled into single or multi-die stacked packages, or in singulated die or module form factor.

About Aehr Test Systems
Headquartered in Fremont, California, Aehr Test Systems is a worldwide provider of test systems for burning-in and testing logic, optical and memory integrated circuits and has installed over 2,500 systems worldwide. Increased quality and reliability needs of the Automotive and Mobility integrated circuit markets are driving additional test requirements, incremental capacity needs, and new opportunities for Aehr Test products in package, wafer level, and singulated die/module level test. Aehr Test has developed and introduced several innovative products, including the ABTS™ and FOX-P™ families of test and burn-in systems and FOX WaferPak™ Aligner, FOX-XP WaferPak Contactor, FOX DiePak^® Carrier and FOX DiePak Loader. The ABTS system is used in production and qualification testing of packaged parts for both lower power and higher power logic devices as well as all common types of memory devices. The FOX-XP and FOX-NP systems are full wafer contact and singulated die/module test and burn-in systems used for burn-in and functional test of complex devices, such as leading-edge memories, digital signal processors, microprocessors, microcontrollers, systems-on-a-chip, and integrated optical devices. The FOX-CP system is a new low-cost single-wafer compact test and reliability verification solution for logic, memory and photonic devices and the newest addition to the FOX-P product family. The WaferPak contactor contains a unique full wafer probe card capable of testing wafers up to 300mm that enables IC manufacturers to perform test and burn-in of full wafers on Aehr Test FOX systems. The DiePak Carrier is a reusable, temporary package that enables IC manufacturers to perform cost-effective final test and burn-in of both bare die and modules. For more information, please visit Aehr Test Systems’ website at www.aehr.com.

Safe Harbor Statement
This press release contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements generally relate to future events or Aehr’s future financial or operating performance. In some cases, you can identify forward-looking statements because they contain words such as "may," "will," "should," "expects," "plans," "anticipates,” “going to,” "could," "intends," "target," "projects," "contemplates," "believes," "estimates," "predicts," "potential," or "continue," or the negative of these words or other similar terms or expressions that concern Aehr’s expectations, strategy, priorities, plans, or intentions. Forward-looking statements in this press release include, but are not limited to, future requirements and orders of Aehr’s new and existing customers; bookings forecasted for proprietary WaferPak™ and DiePak consumables; and expectations related to long-term demand for Aehr’s productions and the attractiveness of key markets. The forward-looking statements contained in this press release are also subject to other risks and uncertainties, including those more fully described in Aehr’s recent Form 10-K, 10-Q and other reports filed from time to time with the Securities and Exchange Commission. Aehr disclaims any obligation to update information contained in any forward-looking statement to reflect events or circumstances occurring after the date of this press release.

Contacts:
Aehr Test Systems		MKR Investor Relations Inc.
Vernon Rogers		Todd Kehrli or Jim Byers
EVP of Sales & Marketing		Analyst/Investor Contact
(510) 623-9400 x215		(323) 468-2300
vrogers@aehr.com		aehr@mkr-group.com

FAQ

What is the recent order received by Aehr Test Systems?

Aehr Test Systems received a $1.3 million order for two FOX-NP™ systems.

Who is the customer for Aehr's FOX-NP systems?

The customer is one of the world's largest semiconductor manufacturers.

When are the FOX-NP systems expected to ship?

The FOX-NP systems are expected to ship within the next few months.

What market growth is projected for silicon photonics?

The silicon photonics market is projected to grow at a 49% CAGR from 2021 to 2026.

How do FOX-NP systems enhance testing for silicon photonics devices?

FOX-NP systems allow parallel testing of multiple wafers, improving efficiency and reducing costs.